You are currently on the new version of our website. Access the old version .
PolymersPolymers
  • Erratum
  • Open Access

23 October 2020

Erratum: Development of Poly(l-Lactic Acid)-Based Bending Actuators. Polymers 2020, 12, 1187

,
,
,
,
and
1
CQ-VR, University of Trás-os-Montes e Alto Douro, 5000-801 Vila Real, Portugal
2
Centre of Physics, University of Minho, 4710-057 Braga, Portugal
3
Centre of Chemistry, University of Minho, 4710-057 Braga, Portugal
4
Department of Chemistry, University of Trás-os-Montes e Alto Douro, 5000-801 Vila Real, Portugal
This article belongs to the Special Issue Conducting Polymers for Advanced Applications
The authors wish to make a change to their published paper [1]. In the original manuscript, there is a mistake in a sentence in Section 3.5, on page 10. Two words “anions and cations” were reverted by mistake. The corrected sentence is shown below:
The strain developed as a response to the applied electrical field results from the diffusion of the ions and migration to the positive (anions) and negative (cations) electrode layers, and subsequent accumulation close to the electrodes.
The authors apologize for any inconvenience caused, and the change does not affect the scientific results. The manuscript will be updated, and the original will remain online on the article webpage at https://www.mdpi.com/2073-4360/12/5/1187.

References

  1. Correia, D.M.; Fernandes, L.C.; Cruz, B.D.D.; Botelho, G.; de Zea Bermudez, V.; Lanceros-Méndez, S. Development of Poly(l-Lactic Acid)-Based Bending Actuators. Polymers 2020, 12, 1187. [Google Scholar] [CrossRef] [PubMed]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.