Crystals, Volume 13, Issue 11

The key thermophysical properties necessary for the successful design and use of CoCrFeNi alloy in thermophysical applications have been measured experimentally, and the results have been compared with literature values and results previously obtaine...

Multi-component high-entropy (TiCrAl0.5NbCu)CxNy coatings targeting applications requiring medium-to-high friction and wear-resistant surfaces were fabricated through the co-sputtering of elemental targets in an Ar + CH4 + N2 reactive atmosphere usin...

Metal halide perovskites, emerging innovative and promising semiconductor materials with notable properties, have been a great success in the optoelectronic and photocatalytic fields. At the same time, two-dimensional (2D) materials, including graphe...

This work studies the influence of the composition of an acetylene–oxygen explosive O2/C2H2 mixture on the structure and properties of hydroxyapatite coatings obtained by detonation spraying. The molar ratios of O2/C2H2 were 2.61; 3.03 and 3.35...

In water-soluble binder systems, polyethylene glycol (PEG) and polymethylmethacrylate (PMMA) are often used as primary and secondary components. The PEG/PMMA binder system is clean and environmentally friendly, but the discrepancy between the crystal...

In this paper, the effects of nickel foam with different thicknesses, as a fluid collector, on the morphology and properties of electrode materials were explored. The Fe2O3 material, which is a common active material for supercapacitor electrodes, wa...

Optical absorption spectra of 9 MeV electron-irradiated GaSe crystals were studied. Two absorption bands with the low-photon-energy threshold at 1.35 and 1.73 eV (T = 300 K) appeared in the transparency region of GaSe after the high-energy-electron i...

Two non-redundant, high-quality sets of protein X-ray crystal structures from the Protein Data Bank (room temperature, 288–298 K, and low temperature, 95–105 K) were compared to structural predictions conducted using ColabFold/AlphaFold2....

The aim of this study is to investigate friction stir welding (FSW) to join A304 austenitic stainless steel and low carbon steel A283 Gr. C in-lap configuration to clad the carbon steel with highly corrosion-resistant stainless steel. Thus, a wide ra...

The article presents the results of measuring the luminescence spectra, luminescence excitation spectra and luminescence spectra under high pressures for LaAlO3:Pr with concentration of 1%. The materials were synthesized by solid phase synthesis. Dif...