Skip to Content
You are currently on the new version of our website. Access the old version .
CatalystsCatalysts
  • Article
  • Open Access

26 October 2022

18 Pages

Photocatalytic Degradation of Methylene Blue and Ortho-Toluidine Blue: Activity of Lanthanum Composites LaxMOy (M: Fe, Co, Ni)

,
,
,
,
,
and
1
School of Natural and Applied Sciences, Sol Plaatje University, Kimberley 8300, South Africa
2
Department of Physics, CSET, University of South Africa, Johannesburg 1710, South Africa
3
Botswana Institute for Technology Research and Innovation (BITRI), Private Bag 0082, Gaborone, Botswana
4
Department of Physics, University of the Free State, Bloemfontein 9300, South Africa

Abstract

Lanthanum (La) nanocomposites LaFeO3, LaNiO3, and LaCoO3 were synthesized using a sol-gel method, and different La to-metal (Fe, Ni, or Co) ratios were attained using various concentrations of salts. The resulting composites were calcined at 540 °C and characterized by XRD, SEM-EDX, FT-IR spectroscopy, XPS, thermogravimetric analysis (TGA), and PL spectroscopy. The activity of the lanthanum composites (LaFeO3, LaNiO3, and LaCoO3) was studied using the photocatalytic degradation of methylene blue (MB) and ortho-toluidine blue (o-TB) under visible light with a wavelength below 420 nm. The change in the concentration of dyes was monitored by using the UV-Vis spectroscopy technique. All composites appeared to have some degree of photocatalytic activity, with composites possessing an orthorhombic crystal structure having higher photocatalytic activity. The LaCoO3 composite is more efficient compared with LaFeO3 and LaNiO3 for both dyes. High degradation percentages were observed for the La composites with a 1:1 metal ratio.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.