Skip to Content
MDPIMDPI

Advanced

SustainabilitySustainability
PDF
  • Correction
  • Open Access

10 March 2026

2 Pages

Correction: Vidakis et al. Sustainable Additive Manufacturing: Mechanical Response of Acrylonitrile-Butadiene-Styrene over Multiple Recycling Processes. Sustainability 2020, 12, 3568

,
,
,
,
and
1
Mechanical Engineering Department, Hellenic Mediterranean University, 71410 Heraklion Crete, Greece
2
Department of Materials Science and Technology, University of Crete, 70013 Heraklion Crete, Greece
3
Electrical Engineering Department, Hellenic Mediterranean University, 71410 Heraklion Crete, Greece
4
General Department, University of Thessaly, 41500 Larissa, Greece
Sustainability2026, 18(6), 2669;https://doi.org/10.3390/su18062669
This article belongs to the Special Issue Sustainable Manufacturing Processes and Machine Tool Technology
Version Notes
Order Reprints
The authors would like to make the following corrections to the published paper [1]. The authors state that the same image was mistakenly inserted in Figure 8d and Figure 9j. The changes are as follows.
The authors would like to replace Figure 8d; therefore, the original Figure 8
Figure 8. SEM images of the tensile fracture area of the representative specimens for 1st (a,b), 2nd (c,d) and 3rd (e,f) recycle course.
is replaced with
Figure 8. SEM images of the tensile fracture area of the representative specimens for the 1st (a,b), 2nd (c,d) and 3rd (e,f) recycle courses.
The authors and the Editorial Office would like to apologize for any inconvenience caused to the readers and state that the scientific conclusions remain unaffected. The original article has been updated.

Reference

  1. Vidakis, N.; Petousis, M.; Maniadi, A.; Koudoumas, E.; Vairis, A.; Kechagias, J. Sustainable Additive Manufacturing: Mechanical Response of Acrylonitrile-Butadiene-Styrene over Multiple Recycling Processes. Sustainability 2020, 12, 3568. [Google Scholar] [CrossRef] [Scilit]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Article Metrics

Citations

Article Access Statistics

Journal Statistics
Multiple requests from the same IP address are counted as one view.
Correction: Yum et al. A Hybrid Spatial–Experiential Design Framework for Sustainable Factory Tours: A Case Study of the Optical Lens Manufacturer. Sustainability 2025, 17, 10650
Previous
Impacts of Land Use/Land Cover Change on the Spatial Heterogeneity of Carbon Storage Under Alternative Scenarios in Coastal Zhejiang–Fujian–Guangdong, China (2000–2035)
Next