Skip to Content
MaterialsMaterials
  • Article
  • Open Access

2 January 2026

14 Pages

Effects of Direct Fluorination on the High-Temperature Oxidation Resistance of AZ31 Magnesium Alloy

,
and
1
Department of Materials Science and Engineering, Faculty of Engineering, University of Fukui, 3-9-1 Bunkyo, Fukui 910-8507, Japan
2
Cooperative Research Center, University of Fukui, 3-9-1 Bunkyo, Fukui 910-8507, Japan
*
Author to whom correspondence should be addressed.
This article belongs to the Section Metals and Alloys

Abstract

Fluorination has been proposed as an effective surface modification method for magnesium. The high-temperature oxidation behavior and protective mechanism of fluorinated AZ31 magnesium alloys, especially under prolonged isothermal conditions, have not been systematically investigated. In this study, an efficient and safe surface fluorination method that requires no post-treatment was developed to directly fluorinate the surface of AZ31 machining chips using F2 gas. By adjusting the fluorination parameters, including fluorine gas pressure, temperature, and reaction time, the content and uniformity of the surface MgF2 layer were effectively improved. High-temperature isothermal oxidation tests demonstrated a remarkable enhancement in oxidation resistance after fluorination; specifically, the weight change of the fluorinated samples decreased from 64.65% for the untreated alloy to 0.68% after oxidation at 450 °C for 12 h. To verify the formation of the MgF2 layer and its protective mechanism, all samples were systematically characterized before and after heat treatment using XPS, SEM/EDS, and XRD. The results confirm that direct fluorination with F2 is an effective approach for improving the high-temperature stability of AZ31 magnesium alloy.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.