Highlights
- The manuscript has been updated (and highlighted) to elaborate on the synergetic effects between the Cu2O, Al2O3, and TiO2 layers. Specifically, the following has been elaborated:
- The Al2O3 layer acts as a passivation layer, reducing surface charge accumulation and recombination losses.
- The TiO2 layer enhances charge separation by forming a heterojunction with Cu2O, facilitating electron transfer.
- Together, these layers reduce both charge transfer resistance and photocorrosion, as evidenced by the Nyquist plots.
Abstract
The photoelectrochemical (PEC) reduction of carbon dioxide to environmentally friendly fuels is a promising strategy to address the challenge of clean energy demand. Semiconductor photocathodes such as Cu2O enable the reduction of carbon dioxide, but their main drawback is their instability and susceptibility to photocorrosion. In this work, Al2O3 and TiO2 were utilized to enhance stability, photoelectrochemical activity, and charge transport facilitation, resulting in a 2.8-fold increase in generated photocurrent density (1.4 mA/cm2 at −0.2 V vs. RHE). The experiments were conducted in a 0.5 M NaCl solution, simulating seawater conditions, to evaluate the performance and stability of the system in an environment closer to real-world applications