Skip to Content
MaterialsMaterials
  • Article
  • Open Access

5 December 2025

13 Pages

Preparation and Application of Porous Metallic Glasses via Aging-Assisted Ultrasonic Vibration and Compression

,
,
,
,
,
,
and
1
Shenzhen Key Laboratory of High Performance Nontraditional Manufacturing, College of Mechatronics and Control Engineering, Shenzhen University, Shenzhen 518060, China
2
School of Materials Science and Engineering, Central South University, 932 South Lushan Road, Changsha 410083, China
*
Authors to whom correspondence should be addressed.
†
These authors contributed equally to this work.

Abstract

The quest for enhanced energy efficiency is inextricably linked to advancements in energy storage and conversion, with porous metallic glasses (MGs) serving as catalysts that hold significant potential in this area. In this study, we report the preparation of uniform porous structures by aging-assisted ultrasonic vibration (AAUV). The results indicate that ultrasonic treatment effectively enhances the energy state while preserving the amorphous structure of Zr62Cu15.5Ni12.5Al10 MGs. The results demonstrate that UV treatment effectively elevates the energy state while maintaining the amorphous structure. Electrochemical tests reveal significantly improved chemical activity after UV treatment, with a reduced corrosion potential and over 200-fold increase in electrochemical surface area after dealloying. The dealloyed UV-treated samples develop uniform porous structures with Cu-enriched zones, exhibiting exceptional catalytic performance in alkaline media (oxygen evolution reaction: 350 mV, hydrogen evolution reaction: 163 mV), comparable to commercial catalysts. This work provides new insights into developing high-performance MGs through energy-state engineering.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.