Skip to Content
You are currently on the new version of our website. Access the old version .

Materials, Volume 17, Issue 10

2024 May-2 - 299 articles

Cover Story: Tin oxide (SnO2) and titanium oxide (TiO2) have often been utilized as key components in the electron transport layers (ETLs) of lead–halide perovskite solar cells (PSCs). We investigated the formation of nanoparticulate SnO2/TiO2 solid solutions via a sintering process and evaluated the effect of Li-doping on the performance of PSCs. Successive spin-coating and sintering of the integrated double layers, i.e., a layer of single-nanometer-scale SnO2 particles and Li-containing titanium isopropoxide precursors, enabled the production of a Li-doped SnO2-based solid solution with TiO2. This process could offer a beneficial approach as an alternative to conventional SnO2 ETLs for optimizing the performance of PSCs. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list .
  • You may sign up for email alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.

Articles (299)

  • Article
  • Open Access
10 Citations
3,366 Views
10 Pages

Single-Walled Carbon Nanotube-Reinforced PEDOT: PSS Hybrid Electrodes for High-Performance Ionic Electroactive Polymer Actuator

  • Haoxiang Tao,
  • Guangyao Hu,
  • Shun Lu,
  • Bing Li and ,
  • Yongxing Zhang and
  • Jie Ru
  • + 1 author+ 0 author

20 May 2024

Ionic electroactive polymer (iEAP) actuators are recognized as exceptional candidates for artificial muscle development, with significant potential applications in bionic robotics, space exploration, and biomedical fields. Here, we developed a new iE...

(This article belongs to the Section Carbon Materials)
  • Article
  • Open Access
4 Citations
3,649 Views
19 Pages

Improvements in Wear and Corrosion Resistance of Ti-W-Alloyed Gray Cast Iron by Tailoring Its Microstructural Properties

  • Abdul Razaq,
  • Peng Yu,
  • Adnan Raza Khan,
  • Xiao-Yuan Ji and ,
  • Ya-Jun Yin,
  • Jian-Xin Zhou and
  • Taher A. Shehabeldeen
  • + 2 authors+ 0 author

20 May 2024

The improved wear and corrosion resistance of gray cast iron (GCI) with enhanced mechanical properties is a proven stepping stone towards the longevity of its versatile industrial applications. In this article, we have tailored the microstructural pr...

(This article belongs to the Special Issue Precision Manufacturing of Advanced Alloys and Composites)
  • Article
  • Open Access
3 Citations
2,481 Views
19 Pages

20 May 2024

In normal cold rolling, the elastic deformation of the strip is typically ignored because of the dominant plastic deformation. However, this neglect may introduce additional errors when the strip is very thin. The aim of this study is to investigate...

  • Article
  • Open Access
1 Citations
1,892 Views
13 Pages

Investigation of the Strain–Stress Field in Nanoscale Multilayer Systems by the Phase Plane Method

  • Dmitrii Belous,
  • Anna Badalyan,
  • Alexei Khomenko and
  • Alexander Goncharov

20 May 2024

This paper presents the results of the study of stress relaxation fields, deformation, and temperature of the system of nanostructured multilayer coatings. In the work, a nonlinear relationship between strain and stress was used to take into account...

  • Article
  • Open Access
16 Citations
2,866 Views
16 Pages

20 May 2024

The poor early shrinkage and cracking performances of manufactured sand concrete, waste powder concrete, and recycled aggregate concrete are the main difficulties in engineering applications. To solve these problems, early shrinkage and cracking, str...

  • Review
  • Open Access
59 Citations
14,627 Views
22 Pages

20 May 2024

The development of materials with self-healing capabilities has garnered considerable attention due to their potential to enhance the durability and longevity of various engineering and structural applications. In this review, we provide an overview...

  • Article
  • Open Access
11 Citations
2,675 Views
12 Pages

Flexible Nanofiber Pressure Sensors with Hydrophobic Properties for Wearable Electronics

  • Yang Liu,
  • Baoxiu Wang,
  • Jiapeng Chen,
  • Min Zhu and
  • Zhenlin Jiang

20 May 2024

In recent years, flexible pressure sensors have received considerable attention for their potential applications in health monitoring and human–machine interfaces. However, the development of flexible pressure sensors with excellent sensitivity...

(This article belongs to the Section Smart and Functional Materials)
  • Article
  • Open Access
7 Citations
3,392 Views
16 Pages

20 May 2024

The objective of this paper is to investigate the effect of calcium nitrite (CN) on improving the mechanical properties and microstructures of early-frozen cement paste. Cement pastes containing 1%, 1.5%, 2%, 2.5%, and 3% CN were prepared. One batch...

  • Article
  • Open Access
1 Citations
2,291 Views
20 Pages

Hybrid Nanoparticles from Random Polyelectrolytes and Carbon Dots

  • Sophia Theodoropoulou,
  • Antiopi Vardaxi,
  • Antonia Kagkoura,
  • Nikos Tagmatarchis and
  • Stergios Pispas

20 May 2024

The present study concerns the preparation of hybrid nanostructures composed of carbon dots (CDs) synthesized in our lab and a double-hydrophilic poly(2-dimethylaminoethyl methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate) (P(DMAEMA-co...

(This article belongs to the Section Carbon Materials)
  • Article
  • Open Access
13 Citations
3,012 Views
15 Pages

Rheological Properties and 3D Printing Behavior of PCL and DMSO2 Composites for Bio-Scaffold

  • Jae-Won Jang,
  • Kyung-Eun Min,
  • Cheolhee Kim,
  • Chien Wern and
  • Sung Yi

20 May 2024

The significance of rheology in the context of bio three-dimensional (3D) printing lies in its impact on the printing behavior, which shapes material flow and the layer-by-layer stacking process. The objective of this study is to evaluate the rheolog...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
2 Citations
2,047 Views
12 Pages

Strength–Plasticity Relationship and Intragranular Nanophase Distribution of Hybrid (GNS + SiCnp)/Al Composites Based on Heat Treatment

  • Jiajia Zhang,
  • Mingfang Qian,
  • Zhenggang Jia,
  • Xuexi Zhang and ,
  • Aibin Li,
  • Guisong Wang and
  • Lin Geng
  • + 2 authors+ 0 author

20 May 2024

The distribution of reinforcements and interfacial bonding state with the metal matrix are crucial factors in achieving excellent comprehensive mechanical properties for aluminum (Al) matrix composites. Normally, after heat treatment, graphene nanosh...

(This article belongs to the Special Issue Study on Advanced Metal Matrix Composites (2nd Edition))
  • Article
  • Open Access
3 Citations
2,721 Views
17 Pages

Advanced Computational Analysis of Cobalt-Based Superalloys through Crystal Plasticity

  • Shahriyar Keshavarz,
  • Carelyn E. Campbell and
  • Andrew C. E. Reid

20 May 2024

This study introduces an advanced computational method aimed at accelerating continuum-scale processes using crystal plasticity approaches to predict mechanical responses in cobalt-based superalloys. The framework integrates two levels, namely, sub-g...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
7 Citations
2,729 Views
15 Pages

The Microstructure and Mechanical Properties of Si3N4f/BN/SiBCN Microcomposites Fabricated by the PIP Process

  • Zhiyou Gong,
  • Zhongkai Xu,
  • Jian Zhang,
  • Ruisong Guo and ,
  • Yao Han,
  • Xiaohong Sun,
  • Zhuang Yuan,
  • Xinqi Zhao,
  • Bingqing Zhang and
  • Chunming Zheng
  • + 5 authors+ 0 author

20 May 2024

SiBCN ceramics based on SiC, BN and Si3N4 structures have good comprehensive properties such as high-temperature resistance, oxidation resistance, creep resistance and long life, which makes it one of the very promising ceramic material systems in mi...

  • Article
  • Open Access
2 Citations
2,831 Views
14 Pages

Anisotropic Hyperelastic Strain Energy Function for Carbon Fiber Woven Fabrics

  • Renye Cai,
  • Heng Zhang,
  • Chenxiang Lai,
  • Zexin Yu and ,
  • Xiangkun Zeng,
  • Min Wu,
  • Yankun Wang,
  • Qisen Huang,
  • Yiwei Zhu and
  • Chunyu Kong
  • + 5 authors+ 0 author

20 May 2024

The present paper introduces an innovative strain energy function (SEF) for incompressible anisotropic fiber-reinforced materials. This SEF is specifically designed to understand the mechanical behavior of carbon fiber-woven fabric. The considered mo...

(This article belongs to the Section Carbon Materials)
  • Article
  • Open Access
3 Citations
3,090 Views
27 Pages

Prediction of Aggregate Packing with Tubular Macrocapsules in the Inert Structure of Self-Healing Concrete Based on Dewar’s Particle Packing Model

  • Harry Hermawan,
  • Alicia Simons,
  • Silke Teirlynck,
  • Giovanni Anglani and ,
  • Pedro Serna,
  • Jean-Marc Tulliani,
  • Paola Antonaci,
  • Peter Minne and
  • Elke Gruyaert
  • + 4 authors+ 0 author

19 May 2024

This paper brings a new insight into understanding the influence of macrocapsules in packing systems, which can be useful in designing the inert structure of self-healing concrete. A variety of tubular macrocapsules, in terms of types and sizes, was...

(This article belongs to the Section Construction and Building Materials)
  • Review
  • Open Access
47 Citations
6,970 Views
36 Pages

Nano-Enhanced Phase Reinforced Magnesium Matrix Composites: A Review of the Matrix, Reinforcement, Interface Design, Properties and Potential Applications

  • Jiao-Yi Ren,
  • Guan-Cheng Ji,
  • Hao-Rui Guo,
  • Yu-Meng Zhou and ,
  • Xin Tan,
  • Wen-Fang Zheng,
  • Qian Xing,
  • Jia-Yi Zhang,
  • Jing-Ran Sun and
  • Qi-Chuan Jiang
  • + 7 authors+ 2 authors

19 May 2024

Magnesium matrix composites are essential lightweight metal matrix composites, following aluminum matrix composites, with outstanding application prospects in automotive, aerospace lightweight and biomedical materials because of their high specific s...

(This article belongs to the Special Issue High Performance Alloy and Its Nanocomposites)
  • Article
  • Open Access
4 Citations
2,149 Views
10 Pages

19 May 2024

The tack of prepreg is a key factor affecting the automatic tape laying process. During the manufacturing process of large composite parts, prepreg material may be stored at room temperature for several days, resulting in a decrease in its tack. In t...

(This article belongs to the Topic Advanced Composites Manufacturing and Plastics Processing)
  • Article
  • Open Access
5 Citations
1,999 Views
23 Pages

Effects of a Complex Environment on Fatigue and Self-Healing Characterization of Asphalt Composites Containing Rock Asphalt

  • Ruixia Li,
  • Shangjun Yu,
  • Hailong Chen,
  • Jiahui Wu and ,
  • Yijun Chen and
  • Jinchao Yue
  • + 1 author+ 0 author

19 May 2024

In recent years, asphalt pavement has been subjected to varied environmental conditions during its service life, conditions that predispose it to deformation and cracking. To enhance the performance of asphalt pavement, rock asphalt has been selected...

(This article belongs to the Special Issue Characterization, Applications and New Technologies of Civil Engineering Materials and Structures, 2nd Edition)
  • Article
  • Open Access
9 Citations
2,172 Views
21 Pages

19 May 2024

A series of freeze–thaw cycling tests, as well as cyclic loading and unloading tests, have been conducted on nodular sandstones to investigate the effect of fatigue loading and freeze–thaw cycling on the damage evolution of fractured sand...

(This article belongs to the Special Issue Innovative Material Design and Nondestructive Testing Applications for Infrastructure Materials)
  • Article
  • Open Access
3 Citations
2,520 Views
20 Pages

19 May 2024

Cutlery and flatware designs are an everchanging phenomenon of the manufacturing industry. Worldwide hospitality businesses demand perpetual evolution in terms of aesthetics, designs, patterns, colours, and materials due to customers’ demands,...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
7 Citations
2,271 Views
16 Pages

19 May 2024

Chromium- and cobalt-based alloys, as well as chrome–nickel steels, are most used in dental prosthetics. Unfortunately, these alloys, especially nickel-based alloys, can cause allergic reactions. A disadvantage of these alloys is also insuffici...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
1 Citations
1,980 Views
14 Pages

19 May 2024

Co-condensation of mixed SiGe nanoclusters and impingement of SiGe nanoclusters on a Si substrate were applied using molecular dynamics (MD) simulation in this study to mimic the fast epitaxial growth of SiGe/Si heterostructures under mesoplasma chem...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
2 Citations
2,269 Views
23 Pages

19 May 2024

Advances in electronics and medical diagnostics have made organic dyes extremely popular as key functional materials. From a practical viewpoint, it is necessary to assess the spectroscopic and physicochemical properties of newly designed dyes. In th...

(This article belongs to the Special Issue Size-Dependent Effects in Materials for Environmental Protection and Energy Application (2nd Edition))
  • Article
  • Open Access
7 Citations
2,187 Views
14 Pages

Abrasion Wear Resistance of Precipitation-Hardened Al-Zn-Mg Alloy

  • Tomislav Rodinger,
  • Helena Lukšić,
  • Danko Ćorić and
  • Vera Rede

19 May 2024

The heat treatment of aluminum alloys is very important in industries where low weight in combination with high wear resistance, good strength, and hardness are important. However, depending on their chemical composition, aluminum alloys are subjecte...

(This article belongs to the Section Mechanics of Materials)
  • Article
  • Open Access
3 Citations
2,098 Views
8 Pages

19 May 2024

Garnet-type materials consisting of Y3Al5-2x(Mg,Ge)xO12 (x = 0, 1, 2), combined with Eu3+ or Ce3+ activator ions, were prepared by a solid-state method to determine the structural and optical correlations. The structure of Y3Al5-2x(Mg,Ge)xO12 (x = 1,...

(This article belongs to the Special Issue Advances in Photoelectric Materials: Preparation, Properties, and Applications)
  • Article
  • Open Access
3 Citations
2,209 Views
25 Pages

On the Determination of Elastic Properties of Single-Walled Nitride Nanotubes Using Numerical Simulation

  • Nataliya A. Sakharova,
  • André F. G. Pereira,
  • Jorge M. Antunes,
  • Bruno M. Chaparro and ,
  • Tomás G. Parreira and
  • José V. Fernandes
  • + 1 author+ 0 author

18 May 2024

In recent years, tubular nanostructures have been related to immense advances in various fields of science and technology. Considerable research efforts have been centred on the theoretical prediction and manufacturing of non-carbon nanotubes (NTs),...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
13 Citations
5,341 Views
16 Pages

Influence of Carboxymethyl Cellulose as a Thickening Agent for Glauber’s Salt-Based Low Temperature PCM

  • Jay Thakkar,
  • Sai Bhargav Annavajjala,
  • Margaret J. Sobkowicz and
  • Jan Kosny

18 May 2024

This work is focused on a novel, promising low temperature phase change material (PCM), based on the eutectic Glauber’s salt composition. To allow phase transition within the refrigeration range of temperatures of +5 °C to +12 °C, combi...

  • Article
  • Open Access
4 Citations
2,110 Views
16 Pages

18 May 2024

In the finite element analysis of asphalt concrete (AC), it is nowadays common to incorporate the information from the underlying scales to study the overall response of this material. Heterogeneity observed at the asphalt mixture scale is analyzed i...

(This article belongs to the Special Issue Experimental Tests and Numerical Analysis of Construction Materials)
  • Article
  • Open Access
21 Citations
2,168 Views
14 Pages

Influence of Fibre Orientation on the Slotting Quality of CFRP Composites Using the Multi-Tooth Mill

  • Ying Zhai,
  • Shuwei Lv,
  • Defeng Yan,
  • Shuaishuai Wang and ,
  • Junyi Lin,
  • Chunyu Mao,
  • Qihao Xu and
  • Jiyu Liu
  • + 3 authors+ 0 author

18 May 2024

Carbon fibre-reinforced plastic (CFRP) composites, prized for their exceptional properties, often encounter surface quality issues during slotting due to their inherent heterogeneity. This paper tackles CFRP slotting challenges by employing multi-too...

(This article belongs to the Special Issue Precision Machining and Micro-/Nano Manufacturing)
  • Article
  • Open Access
13 Citations
2,900 Views
17 Pages

Influence of Solute Drag Effect and Interphase Precipitation of Nb on Ferrite Transformation

  • Yiming Cai,
  • Ran Wei,
  • Duoduo Jin,
  • Honghong Wang and ,
  • Xiangliang Wan,
  • Chengyang Hu and
  • Kaiming Wu
  • + 2 authors+ 0 author

18 May 2024

The significant impact of Nb on ferrite transformation, both in terms of solute drag effect (SDE) and interphase precipitation, was investigated quantitatively. Ferrite transformation kinetics were characterized using thermal expansion experiments an...

(This article belongs to the Special Issue Plastic Deformation, Strengthening and Toughening of Advanced Metallic Materials (2nd Edition))
  • Article
  • Open Access
4 Citations
2,092 Views
10 Pages

18 May 2024

Reversible optical regulation has potential applications in optical anti-counterfeiting, storage, and catalysis. Compared to common power materials, the reverse opal structure has a larger specific surface area and an increased contact area for optic...

  • Review
  • Open Access
59 Citations
13,434 Views
35 Pages

Exploring the Progress of Hyaluronic Acid Hydrogels: Synthesis, Characteristics, and Wide-Ranging Applications

  • Iman Gholamali,
  • Trung Thang Vu,
  • Sung-Han Jo,
  • Sang-Hyug Park and
  • Kwon Taek Lim

18 May 2024

This comprehensive review delves into the world of hyaluronic acid (HA) hydrogels, exploring their creation, characteristics, research methodologies, and uses. HA hydrogels stand out among natural polysaccharides due to their distinct features. Their...

(This article belongs to the Special Issue Synthesis and Characterization of Hydrogels)
  • Article
  • Open Access
5 Citations
2,503 Views
23 Pages

Development of Low-Weight and High-Strength AA6005A Extrudates Intended for Modern Architecture and Design of Innovative Die for Extrusion Process

  • Jacek Madura,
  • Sandra Puchlerska,
  • Maciej Balcerzak,
  • Piotr Noga and ,
  • Marek Bogusz,
  • Józef Zasadziński,
  • Dariusz Leśniak,
  • Krzysztof Żaba and
  • Henryk Jurczak
  • + 4 authors+ 0 author

18 May 2024

In the realm of modern architecture, the demand for materials that combine strength, durability, and aesthetic flexibility is ever-growing. Addressing this need, this paper presents a study on the innovative use of aluminum extrudates in construction...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
7 Citations
2,431 Views
21 Pages

Combustion Synthesis of Functionalized Carbonated Boron Nitride Nanoparticles and Their Potential Application in Boron Neutron Capture Therapy

  • Stanisław Cudziło,
  • Bożena Szermer-Olearnik,
  • Sławomir Dyjak,
  • Mateusz Gratzke and ,
  • Kamil Sobczak,
  • Anna Wróblewska,
  • Agnieszka Szczygieł,
  • Jagoda Mierzejewska,
  • Katarzyna Węgierek-Ciura and
  • Elżbieta Pajtasz-Piasecka
  • + 9 authors+ 4 authors

18 May 2024

In this research, we developed boron-rich nanoparticles that can be used for boron neutron capture therapy as potential carriers for boron delivery to cancerous tissues. Functionalized carbonated boron nitride nanostructures (CBNs) were successfully...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
6 Citations
3,236 Views
18 Pages

Keratin/Copper Complex Electrospun Nanofibers for Antibacterial Treatments: Property Investigation and In Vitro Response

  • Maria Laura Tummino,
  • Iriczalli Cruz-Maya,
  • Alessio Varesano,
  • Claudia Vineis and
  • Vincenzo Guarino

18 May 2024

The frontiers of antibacterial materials in the biomedical field are constantly evolving since infectious diseases are a continuous threat to human health. In this work, waste-wool-derived keratin electrospun nanofibers were blended with copper by an...

(This article belongs to the Special Issue Nanoarchitectonics in Materials Science)
  • Article
  • Open Access
4 Citations
2,191 Views
24 Pages

Effect of the Axial Profile of a Ceramic Grinding Wheel on Selected Roughness Parameters of Shaped Surfaces Obtained in the Grinding Process with a Dual-Tool Grinding Head

  • Piotr Jaskólski,
  • Marzena Sutowska,
  • Wojciech Zawadka,
  • Winfried Malorny and ,
  • Krzysztof Rokosz and
  • Krzysztof Nadolny
  • + 1 author+ 0 author

18 May 2024

The use of CNC equipment that integrates several machining operations eliminates downtime due to changes in setup and clamping of workpieces in more than one machining device. A review of CNC equipment and tools known from the literature and from man...

(This article belongs to the Special Issue Obtaining and Characterization of New Materials (5th Edition))
  • Article
  • Open Access
7 Citations
3,861 Views
16 Pages

Freeze-Casting of Alumina and Permeability Analysis Based on a 3D Microstructure Reconstructed Using Generative Adversarial Networks

  • Xianhang Li,
  • Li Duan,
  • Shihao Zhou,
  • Xuhao Liu and ,
  • Zhaoyue Yao and
  • Zilin Yan
  • + 1 author+ 0 author

18 May 2024

In this study, alumina ceramics with hierarchical pores were successfully fabricated using freeze casting. Experimental studies show that both the solid loading of the slurry and the thermal insulation layer at the interface of the slurry and cooling...

(This article belongs to the Special Issue Porous Ceramics, Glasses and Composites, Volume II)
  • Article
  • Open Access
13 Citations
4,488 Views
11 Pages

18 May 2024

The emergence of additive manufacturing technologies for fiber-reinforced thermoset composites has greatly bolstered their utilization, particularly within the aerospace industry. However, the ability to precisely measure the interface strength betwe...

(This article belongs to the Special Issue Carbon Fiber Reinforced Polymers (2nd Edition))
  • Article
  • Open Access
1 Citations
1,510 Views
9 Pages

18 May 2024

The high-temperature stability of RuAl-based electrodes for application in microelectronic devices is analyzed for long-term duration. The electrodes are prepared on Ca3TaGa3Si2O14 (CTGS) substrates using SiO2 and Al-N-O cover and barrier layers as o...

(This article belongs to the Section Electronic Materials)
  • Article
  • Open Access
11 Citations
2,259 Views
23 Pages

Evaluation of the Surface Topography of Microfinishing Abrasive Films in Relation to Their Machining Capability of Nimonic 80A Superalloy

  • Katarzyna Tandecka,
  • Wojciech Kacalak,
  • Filip Szafraniec,
  • Michał Wieczorowski and
  • Thomas G. Mathia

18 May 2024

This study investigates the surface topography of microfinishing abrasive films and their machining capability on the Nimonic 80A superalloy, a high-performance nickel-based alloy commonly used in aerospace and gas turbine engine applications. Surfac...

(This article belongs to the Special Issue Precision and Ultra-Precision Subtractive and Additive Manufacturing Processes of Alloys and Steels, 2nd Edition)
  • Article
  • Open Access
2 Citations
2,325 Views
12 Pages

First-Principles Study of Discharge Products and Their Stability for Lithium-Nitrogen Batteries

  • Guoxiong Qu,
  • Xudong Zhao,
  • Chengdong Wei,
  • Hongyi Zhang and ,
  • Yutong Yang,
  • Hongtao Xue and
  • Fuling Tang
  • + 2 authors+ 0 author

18 May 2024

Li-N2 batteries present a relatively novel approach to N2 immobilization, and an advanced N2/Li3N cycling method is introduced in this study. The low operating overpotential of metal–air batteries is quite favorable to their stable cycling perf...

(This article belongs to the Special Issue Advanced Electrode Materials for Batteries)
  • Article
  • Open Access
6 Citations
2,359 Views
12 Pages

Effect of Pseudomonas aeruginosa on Corrosion Behavior of X65 Carbon Steel

  • Zixuan Shao,
  • Ruiqi Guo,
  • Jianhua Tang and
  • Xin Zhang

17 May 2024

X65 pipeline steel is widely used in the field of offshore oil and gas exploitation due to its excellent performance. However, due to the complex environment in the ocean, X65 pipeline steel is faced with a great risk of microbial corrosion failure....

  • Article
  • Open Access
6 Citations
2,504 Views
16 Pages

17 May 2024

The adhesive force between two contact surfaces often leads to an increase in the friction force of the rubber seal O-ring after a certain dwell time, forming dwell time effects and affecting the reliability of sealing. The dwell time effect may resu...

  • Article
  • Open Access
3 Citations
2,095 Views
15 Pages

17 May 2024

This research is dedicated to optimizing the design of microfluidic cells to minimize mass transfer effects and ensure a uniform flow field distribution, which is essential for accurate SPR array detection. Employing finite element simulations, this...

(This article belongs to the Section Materials Physics)
  • Article
  • Open Access
2 Citations
2,039 Views
14 Pages

17 May 2024

Nanomagnetism and spintronics are currently active areas of research, with one of the main goals being the creation of low-energy-consuming magnetic memories based on nanomagnet switching. These types of devices could also be implemented in neuromorp...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
7 Citations
1,878 Views
14 Pages

17 May 2024

ZrCo alloy is easily poisoned by impurity gases such as O2, CO, and CO2, resulting in a deterioration in hydrogen storage performance. In this study, we conducted a comprehensive investigation into the adsorption and dissociation characteristics of o...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
15 Citations
3,384 Views
14 Pages

17 May 2024

The effects of adding nickel on the phase transition temperature, microstructure, and mechanical properties of medium-carbon spring steel have been investigated. The results show that adding nickel reduces the martensite start (Ms) temperature, impro...

(This article belongs to the Special Issue Enhancing In-Use Properties of Advanced Steels)
  • Article
  • Open Access
1 Citations
1,634 Views
16 Pages

Inhibition Studies of Expansion Damage in Medium–Low Reactivity Limestone by Fly Ash

  • Shaocong Dai,
  • Xinyu Zhang,
  • Wei Li,
  • Zhongyang Mao and ,
  • Xiaojun Huang,
  • Min Deng and
  • Bi Chen
  • + 2 authors+ 0 author

17 May 2024

Expansion damage in medium–low reactivity dolomite limestone poses significant challenges in construction and engineering projects. This study investigates the potential of fly ash in inhibiting expansion damage in such limestone formations bas...

(This article belongs to the Special Issue Reaction Mechanism and Properties of Cement-Based Materials)
  • Article
  • Open Access
5 Citations
2,051 Views
13 Pages

Reduction in Powder Wall Friction by an a-C:H:Si Film

  • Christof Lanzerstorfer,
  • Christian Forsich,
  • Francisco Delfin,
  • Manuel C. J. Schachinger and
  • Daniel Heim

17 May 2024

The wall friction angle is an important parameter in powder flow. In a recent study for various powders, a reduction in the wall friction angle for steel was demonstrated by the application of an a-C:H:Si film on the steel surface. This work presents...

(This article belongs to the Special Issue Recent Advances and Emerging Challenges in Functional Coatings)
  • Article
  • Open Access
13 Citations
2,510 Views
16 Pages

The Effect of Ageing on Phase Transformations and Mechanical Behaviour in Ni-Rich NiTi Alloys

  • Jerzy Ratajski,
  • Błażej Bałasz,
  • Katarzyna Mydłowska,
  • Mieczysław Pancielejko and
  • Łukasz Szparaga

17 May 2024

In this article, the results of research on a NiTi alloy with a high nickel content (51.7 at.%), produced using the additive technology SLM method and subjected to isothermal ageing after solution annealing, are presented. The study involved the dete...

(This article belongs to the Section Manufacturing Processes and Systems)

of 6

XFacebookLinkedIn
Materials - ISSN 1996-1944