During the formatting phase of this article [1], the authors did not detect a typographical error in the equations to calculate the SEC value; they would therefore like to make the following correction in both Equations (1) and (7). There was a minus symbol missing in the super index of the η value (percentage of utilization of the injection-molding machine).
Equation (1) was wrongly formatted as:
SEC (KWh/kg) = (7.5 – 5 × E/100) × (η)0.5
Moreover, it must be corrected as the following:
SEC (KWh/kg) = (7.5 – 5 × E/100) × (η)−0.5
Equation (7) was wrongly formatted as:
SEC = (7.5 − (5 × (E/100) × (((w × 3.6/tc)/(0.0052 × Fc))0.15/(ce× (Ti − Ta)/350.255)0.1))) × (w × 100/(⍴ × Vmax))0.5
It must be corrected as the following:
SEC = (7.5 − (5 × (E/100) × (((w × 3.6/tc)/(0.0052 × Fc))0.15/(ce × (Ti − Ta)/350.255)0.1))) × (w × 100/(⍴ × Vmax))−0.5
The authors would also like to take the opportunity to apologize for any inconvenience that this typographical error may have caused in the calculations done by the readers. All the data, calculations and results are correct, but both equations were missing, in the final version, the minus symbol in the superscript, due to a formatting error.
Reference
- Elduque, A.; Elduque, D.; Pina, C.; Clavería, I.; Javierre, C. Electricity Consumption Estimation of the Polymer Material Injection-Molding Manufacturing Process: Empirical Model and Application. Materials 2018, 11, 1740. [Google Scholar]
© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).