Next Article in Journal
Nitrogen-Doped Carbon for Red Phosphorous Based Anode Materials for Lithium Ion Batteries
Previous Article in Journal
Modelling and Characterization of Effective Thermal Conductivity of Single Hollow Glass Microsphere and Its Powder
Article Menu
Issue 1 (January) cover image

Export Article

Correction of Materials 2017, 10(1), 82.

Open AccessCorrection
Materials 2018, 11(1), 135; https://doi.org/10.3390/ma11010135

Correction: An Extended Damage Plasticity Model for Shotcrete: Formulation and Comparison with Other Shotcrete Models

Unit for Strength of Materials and Structural Analysis, Institute of Basic Sciences in Engineering Science, Innsbruck University, Technikerstr. 13, A-6020 Innsbruck, Austria
*
Author to whom correspondence should be addressed.
Academic Editor: Erik Schlangen
Received: 4 January 2018 / Revised: 4 January 2018 / Accepted: 12 January 2018 / Published: 15 January 2018
Full-Text   |   PDF [193 KB, uploaded 15 January 2018]
Note: In lieu of an abstract, this is an excerpt from the first page.

Excerpt

The authors would like to correct following typing errors: For (3) and (4), the correct expressions are given as[...] View Full-Text
This is an open access article distributed under the Creative Commons Attribution License which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited (CC BY 4.0).
SciFeed

Share & Cite This Article

MDPI and ACS Style

Neuner, M.; Gamnitzer, P.; Hofstetter, G. Correction: An Extended Damage Plasticity Model for Shotcrete: Formulation and Comparison with Other Shotcrete Models. Materials 2018, 11, 135.

Show more citation formats Show less citations formats

Note that from the first issue of 2016, MDPI journals use article numbers instead of page numbers. See further details here.

Related Articles

Article Metrics

Article Access Statistics

1

Comments

[Return to top]
Materials EISSN 1996-1944 Published by MDPI AG, Basel, Switzerland RSS E-Mail Table of Contents Alert
Back to Top