Skip to Content
EnergiesEnergies
  • Article
  • Open Access

18 November 2026

24 Pages

Electromagnetic Vibration Suppression of Permanent Magnet Synchronous Motor Based on Foot Geometric Parameters and Modal Modulation

,
,
,
and
1
Department of Electrical and Electronic Engineering, Shenyang University of Technology, Shenyang 110870, China
2
Wuhan Chang Xing Electromechanical Technology, Wuhan 430048, China
*
Author to whom correspondence should be addressed.
This article belongs to the Section F: Electrical Engineering

Abstract

The mounting foot of permanent magnet synchronous motors can affect the modal characteristics and vibration response of the entire machine. To address the limitations of housing surface vibration analysis in characterizing mounting foot vibration, a structural optimization method based on modal tuning of the mounting feet is proposed. By establishing the energy relationship between the geometric parameters of the foot and the overall mass and stiffness of the machine, and combining a Maxwell stress tensor and the modal superposition method to analyze electromagnetic vibration, the influence of mounting foot dimensions on natural frequency and vibration response is studied. Adjusting the mounting foot dimensions can shift the targeted natural frequencies away from the dominant electromagnetic excitation frequencies and reduce the corresponding vibration components. The accuracy of the baseline finite-element modal model is evaluated through impact hammer modal experiments, while the vibration suppression effects of mounting foot optimization are assessed through electromagnetic–structural coupled simulations under no-load and load conditions.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.