Skip to Content
EnergiesEnergies
  • Article
  • Open Access

28 January 2021

26 Pages

Identification of the State of Electrical Appliances with the Use of a Pulse Signal Generator

,
,
,
and
1
Institute of Radioelectronics and Multimedia Technologies, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warsaw, Poland
2
Institute of Electrical Power Engineering, Warsaw University of Technology, Koszykowa 75, 00-662 Warsaw, Poland
*
Authors to whom correspondence should be addressed.
This article belongs to the Special Issue Energy Data Analytics for Smart Meter Data

Abstract

The paper presents the novel HF-GEN method for determining the characteristics of Electrical Appliance (EA) operating in the end-user environment. The method includes a measurement system that uses a pulse signal generator to improve the quality of EA identification. Its structure and the principles of operation are presented. A method for determining the characteristics of the current signals’ transients using the cross-correlation is described. Its result is the appliance signature with a set of features characterizing its state of operation. The quality of the obtained signature is evaluated in the standard classification task with the aim of identifying the particular appliance’s state based on the analysis of features by three independent algorithms. Experimental results for 15 EAs categories show the usefulness of the proposed approach.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.