Skip to Content
EnergiesEnergies
  • Article
  • Open Access

18 November 2020

25 Pages

Using PCM in Two Proposed Residential Buildings in Christchurch, New Zealand

,
,
and
Department of Chemical & Materials Engineering, University of Auckland, Auckland 1010, New Zealand
*
Author to whom correspondence should be addressed.
This article belongs to the Special Issue Thermal Energy Management in Buildings

Abstract

A characteristic feature of lightweight constructions is their low thermal mass which causes high internal temperature fluctuations that require high heating and cooling demand throughout the year. Phase change materials (PCMs) are effective in providing thermal inertia to low-thermal-mass buildings. This paper aims to analyse the thermal behaviour of two proposed lightweight buildings designed for homeless people and to investigate the potential benefit achievable through the use of different types of PCM in the temperate climatic conditions of Christchurch, New Zealand. For this purpose, over 300 numerical simulations were conducted using DesignBuilder® simulation software. The bulk of the simulations were carried out under the assumption that the whole opaque building envelope is equipped with PCM. The results showed significant energy saving and comfort enhancement through the application of PCMs. The integration of PCM in single-structure components led to substantial energy savings between 19% and 27% annually. However, occupant behaviour in terms of ventilation habits, occupancy of zones, etc. remains one of the biggest challenges in any simulation work due to insufficient data.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.