Skip to Content
You are currently on the new version of our website. Access the old version .
SensorsSensors
  • Article
  • Open Access

9 November 2019

11 Pages

Cadmium-Sensitive Measurement Using a Nano-Copper-Enhanced Carbon Fiber Electrode

,
,
,
,
,
,
,
,
and
1
School of Mechanical & Automotive Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, China
2
Jinan Foreign Language School, Jinan 250014, China
3
Department of Mechanical & Industrial Engineering, University of Toronto, 5 King’s College Rd, Toronto, Ontario M5S 3G8, Canada
4
School of Environmental Science & Engineering, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250353, China

Abstract

Enrichment of cadmium ion (Cd2+) from the environment may lead to kidney disease and weakened immunity in the body. Current techniques are not convenient enough to measure Cd2+ concentration in the environment due to low sensitivity and poor linear range. In this paper, a new measurement technique is proposed using a new sensing electrode made of nano-copper-enhanced carbon fiber. Nano-copper was deposited onto the surface of carbon fiber to enhance the current concentration and mass transfer rate of Cd2+ during measurement, which improved the electrochemical detection sensitivity significantly (by up to 3.7 × 108 nA/nM) and broadened the linear range to 10~105 nM. This device provides a low-cost solution for measuring Cd2+ concentration in the environment.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.