Search Results (48)

Background: In this study, two cocrystals of diclofenac acid (DCA) with the coformers theophylline (THEO) and isonicotinamide (ISNT) were prepared. Subsequently, nanococrystals were generated from these cocrystals using a top-down wet media milling approach. Methods: Critical process parameters such as milling time, milling volume, drug loading percentage, bead volume, and dispersion media were optimized to achieve the desired particle size distribution. The nanococrystals were characterized using dynamic light scattering (DLS), polarized light microscopy (PLM), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Results: In vitro dissolution studies revealed that nanococrystals of DCA-ISNT (DE_0–120 = 22.5% at pH 1.2 and DE_0–120 = 58.7% at pH 4.5) and DCA-THEO (DE_0–120 = 18.5% at pH 1.2 and DE_0–120 = 48.2% at pH 4.5) exhibited superior dissolution performance compared to DCA nanocrystals (DE_0–120 = 12.5% at pH 1.2 and DE_0–120 = 39.0% at pH 4.5), with the dissolution advantage decreasing as the pH of the medium increased. The improved dissolution behaviour was a complex interplay of factors including particle size distribution, surface wetting kinetics, exposure of hydrophilic/hydrophobic functional groups during dissolution, nanococrystal microenvironmental pH, DCA’s ionization behaviour, lattice energy, and intermolecular interaction strengths. Additionally, nanococrystals exhibited a significantly higher flux rate in simultaneous gastric transfer dissolution and flux studies compared with DCA, likely due to higher apparent solubility and superior diffusion through the unstirred water layer (UWL). Pharmacokinetic studies confirmed that nanococrystals DCA-ISNT NCC (AUC_0–∞ = 3062.65 ± 526.91 ng/mL·h) outperformed DCA nanocrystals (AUC_0–∞ = 2352.53 ± 537.78 ng/mL·h), DCA-THEO NCC (AUC_0–∞ = 2222.96 ± 151.19 ng/mL·h) and the cocrystals in terms of pharmacokinetic performance. Conclusions: The findings indicate that DCA-ISNT NCC exhibited superior pharmacokinetic performance and, together with the enhanced dissolution and flux properties of the nanococrystals, demonstrates their potential for enhanced therapeutic efficacy. Full article

Underground coal mining faces coupled hazards from respirable coal dust and spontaneous coal combustion. This study developed a dual-function flame-retardant dust suppressant comprising carboxymethyl cellulose (CMC), polycarbodiimide (PCDI), ammonium polyphosphate (APP), and zinc borate (ZB). A four-factor, three-level orthogonal design was used to screen formulations by penetration depth, followed by rheological, water-scour, simulated-roadway, temperature-programmed oxidation, contact-angle, Fourier Transform Infrared Spectroscopy (FTIR), and Scanning Electron Microscope (SEM) analyses. CMC and PCDI significantly affected penetration, whereas APP and ZB showed no significant effects within the tested ranges. The selected formulation (1% CMC, 12% APP, 3.5% ZB, and 1.5% PCDI) showed stable viscosity development and the lowest mass loss under repeated water scour. In simulated-roadway tests, the stock solution achieved an average dust-suppression efficiency of 59.7%. At 170 °C, a 10% treatment reduced CO release by 40.0% and increased the mean apparent activation energy of coal oxidation by 29.73%. Rapid wetting, intermolecular interactions, and formation of a continuous porous crosslinked film supported dust consolidation and oxidation inhibition. The developed material therefore offers a potential integrated approach for controlling coal dust and spontaneous combustion risks in underground mines. Full article

The Huaibei region is a critical grain and energy–chemical base in northern China, characterized by substantial water demand for industrial and agricultural production. Karst groundwater systems constitute the primary water supply source in this area. Under the superimposed impacts of intensive exploitation, climate change, and anthropogenic activities, karst aquifers have encountered a series of geo-environmental problems, including groundwater level decline and expansion of cones of depression. Most previous studies have predominantly focused on water quality assessment and groundwater resource quantification, yet systematic investigations into the multi-scale characteristics and driving mechanisms of karst groundwater level dynamics remain insufficient. In this study, based on long-term groundwater level and rainfall monitoring data (2014–2024) from three monitoring wells representing different types of karst aquifers, continuous wavelet transform (CWT) and wavelet coherence (WTC) approaches are introduced to identify the periodic patterns of karst groundwater levels and reveal the dominant controlling factors of groundwater level dynamics. The results demonstrate that groundwater levels in all types of karst aquifers exhibit distinct multi-scale periodic variations. The groundwater levels of HB01 and HB02 share dominant oscillation periods of 18~19 months and 9 months with regional rainfall, while the groundwater level at HB03 displays a more complex, multi-scale, periodic combination of 41 months, 18~19 months, and 9 months. Periodic variations in regional rainfall serve as the dominant controlling factor for the intra-annual and inter-annual periodic fluctuations of karst water levels, with a prominent resonance relationship identified between the two variables at dominant periodic scales. Distinct heterogeneity is observed in the response magnitude and lag time of different karst aquifer types to rainfall; specifically, the lag time of water level response to rainfall on the annual periodic scale ranges from 2.7 to 2.9 months. The correlation between annual average water level and pumping discharge is moderate for boreholes HB01 and HB03, whereas a strong correlation is detected for borehole HB02, implying that its water level regime is likely subjected to pronounced pumping disturbance. The degree of karst development, aquifer burial depth, and overlying stratum architecture are the key geological factors accounting for such heterogeneous response patterns. For the first time, this study utilizes long-term water level time series data from the karst water exploitation zone of the Huaibei Plain, complemented by synchronous precipitation and pumping records. Integrated with regional hydrogeological settings, wavelet analysis is employed to conduct an in-depth investigation into the dynamic variations in karst water levels in the Huaibei region from the perspective of groundwater recharge–discharge relationships. The results provide a scientific underpinning for the remediation of karst water over-exploitation and the optimal allocation of water resources. Specifically, pumping and artificial recharge schemes can be proactively adjusted based on periodicity forecasts. Zoned management strategies for water resources are put forward: artificial regulation and storage are recommended for zones with sensitive hydrological responses, while preventive protection is prioritized for zones with sluggish responses. By incorporating periodic characteristics and lag durations, targeted pumping strategies for dry and wet seasons can be developed, and a coupled water level–rainfall–pumping early warning system can be established to realize the long-term sustainable regulation of karst water resources. Full article

Hydrodynamic cavitation is assessed as a conditional process-intensification platform for the sustainable recovery and transformation of bioactive and functional fractions from agri-food residues, food-processing by-products, and plant-derived matrices. The analysis focuses on fractions enriched in polyphenols, flavonoids, pectins, carotenoids, proteins, pigments, essential oils, and other value-added compounds with potential relevance for food, nutraceutical, formulation-oriented, and related high-value applications. Rather than being considered an inherently green or universally superior technology, hydrodynamic cavitation is evaluated according to the specific process functions it can provide, including matrix disruption, mass-transfer enhancement, solvent-use reduction, recovery of pectin-associated fractions, protein extraction, macromolecular restructuring, dispersion, and process integration. Quantitative and scale-relevant indicators are considered where available, including recovery yield, target-compound content, solvent use, operating conditions, treated volume, energy input, fraction quality, and reporting limits. Comparison with ultrasound-assisted extraction, microwave-assisted extraction, pulsed electric fields, subcritical water extraction, natural deep eutectic solvents, and enzyme-assisted extraction indicates that its advantage is most defensible when hydrodynamic effects address a clearly identified matrix or process limitation. The available evidence supports substantial potential for wet matrices, plant by-products, aqueous suspensions, and liquid food systems. However, critical gaps remain in energy reporting, selectivity, recovered-fraction stability, scale-up, downstream processing, and application-oriented validation. Recovered fractions should therefore be regarded as candidate ingredients or functional intermediates, rather than as direct evidence of efficacy in final products. Full article

The evaluation of biomass boilers using partial approaches limits system understanding, because energy, exergy, dynamic, and emergy analyses describe complementary, but not equivalent, dimensions of thermo-industrial performance. In response to this gap, an integrated methodological framework is proposed to analyze two representative steam generator technologies in the sugar industry, fueled with ternary mixtures of sugarcane bagasse, Agricultural Crop Residues (ACR), and Dichrostachys cinerea, with the aim of identifying robust operating windows from a simultaneously thermal, exergetic, transient, and sustainability perspective. The methodology combines: (i) a direct and indirect steady-state model to quantify thermal losses and efficiency; (ii) an exergy model to assess conversion quality; (iii) a two-node coupled transient dynamic model capable of representing the differentiated response of the combustion zone and the water/steam system to moisture perturbations; and (iv) an emergy model to estimate the overall sustainability of the process. The results show that the effective moisture content of the mixture is the dominant control variable, since it determines the lower heating value on a wet basis, the specific fuel consumption, the main thermal loss, and the dynamic stability of the system. In the transient domain, a +5% step perturbation in moisture generates drops of 11.14–12.20 °C and 17.76–19.39 °C in furnace temperature for G1 and G2, respectively, while the steam response is damped to 1.03–1.14 °C and 2.39–2.65 °C. Likewise, moisture explains the magnitude of the response with coefficients of determination above 0.99, and the sensitivity analysis identifies the controller time constant, the thermal mass of the water/steam system, and the emissivity as the most influential parameters. Overall, the proposed framework makes it possible to go beyond isolated efficiency assessment and move toward a holistic characterization of biomass boiler performance under technically plausible ternary mixtures. Although the proposed methodological framework is transferable to other biomass combustion contexts, the numerical results—including optimal compositional zones, emergy indicators, and dynamic sensitivity coefficients—are specific to the Cuban sugar industry conditions, adopted transformities, and the biomass types evaluated herein. Full article

Lignocellulosic films (LCFs) derived from biomass have attracted increasing attention owing to their abundant availability, recyclability, and biodegradability, making them promising candidates for replacing non-biodegradable plastics. Notably, the mechanical properties and wet stability of these materials play a crucial role in their practical applications. In this paper, we employ an eco-friendly and straightforward approach to synthesizing high-strength LCF by mixing nanocellulose with lignin. The incorporation of lignin enhances the mechanical strength for LCF, achieving a yield strength of 157.12 MPa at a lignin content of 15 wt% while simultaneously imparting excellent water absorption properties. Fourier transform infrared (FTIR) and contact angle measurements confirmed the structural integrity and hydrophilicity of the composite films. Excessive lignin content led to reduced mechanical performance, emphasizing the importance of optimizing the lignin-to-cellulose ratio. Therefore, this paper demonstrates the significant potential of LCF in developing environmentally friendly materials for applications in water treatment, packaging, flexible electronics, energy storage, and agriculture. Full article

Atmospheric water (AW) is currently recognized as a promising solution to mitigate the global water crisis. Nevertheless, its harvesting techniques should balance three main aspects: energy consumption, yield, and the quality of produced water. Water quality is of the utmost importance, because the potential uses of atmospheric water—and therefore its value—ultimately depend on this characteristic. Currently, existing indices and indicators intended as evaluation tools for different harvesting techniques generally focus on the first two aspects only, overlooking the quality perspective, with the risk of overestimating the performance of systems that require less energy but provide low-quality water. This study fills this knowledge gap by proposing a new evaluation tool, the Atmospheric Water Energy–Quality Index (AWEQI). This index links the energy evaluation of an Atmospheric Water Generator (AWG)—a term referring to all active, passive, or hybrid systems for atmospheric water collection—to the quality of the produced water. The index is constructed through an appropriate reformulation and combination of the Water Energy Transformation (WET) indicator and the Water Quality Index (WQI) to obtain a monotonic function whose values increase with improved performance, both in terms of energy efficiency and water quality. Moreover, based on a literature review, the study presents an analysis of potential AW contaminants and their sources, and proposes two parameter sets to be considered in the WQI calculation. Full article

To improve the extrusion processing of wood–plastic composites (WPCs), functional additives known as internal lubricants are incorporated into the composite formulations. The lubricants play a crucial role in decreasing the melt viscosity of WPCs, which in turn has a positive impact on energy consumption, productivity, and overall composite performance. This study shows the effect of suberinic acids (SAs), extracted from birch outer bark via alkaline water and water–ethanol hydrolysis at different pH values, on the processing behavior and properties of a recycled polypropylene-based composite filled with pine microfibers. The extracted SAs were characterized by gas chromatography–mass spectrometry, Fourier transform infrared spectroscopy, gel permeation chromatography, thermogravimetric analysis, and differential scanning calorimetry. The conducted analyses revealed notable differences in the chemical composition, molecular weight, and molecular polydispersity of the SAs. Betulin was identified as the dominant component (49–86%). The pine sawdust was treated with 2% NaOH at 90 °C for 90 min prior to composite fabrication. The incorporation of 4.0 wt% SAs into the WPC formulations reduced the extruder rotor’s maximum and minimum torques torque, indicating improved processability of the composite. Mechanical and wetting properties of the WPC samples were evaluated. The samples containing SAs exhibited an increased elongation at break by 37.9–51.6% and bending deformation by 12.8–17.5%, depending on the extraction conditions of SAs, accompanied by a slight reduction in the mechanical properties and slight increase in water sorption compared with the composite filled with the alkaline-treated pine microfibers. The results showed enhanced flexibility and ductility in the SAs-containing WPCs. The presence of a 1.0 wt% maleic anhydride-grafted polypropylene in the samples led to an increase their mechanical properties, along with the reduced water sorption. Full article

CO₂ laser processing has emerged as an efficient dry-finishing technique capable of inducing controlled chemical and morphological transformations in cotton and denim textiles. The strong mid-infrared absorption of cellulose enables localised photothermal heating, leading to selective dye decomposition, surface oxidation, and micro-scale ablation while largely preserving the bulk fabric structure. These laser-driven mechanisms modify colour, surface chemistry, and topography in a predictable, parameter-dependent manner. Low-fluence conditions predominantly produce uniform fading through fragmentation and oxidation of indigo dye; in comparison, moderate thermal loads promote the formation of carbonyl and carboxyl groups that increase surface energy and enhance wettability. Higher fluence regimes generate micro-textured regions with increased roughness and anchoring capacity, enabling improved adhesion of dyes, coatings, and nanoparticles. Compared with conventional wet processes, CO₂ laser treatment eliminates chemical effluents, strongly reduces water consumption and supports digitally controlled, Industry 4.0-compatible manufacturing workflows. Despite its advantages, challenges remain in standardising processing parameters, quantifying oxidation depth, modelling thermal behaviour, and assessing the long-term stability of functionalised surfaces under real usage conditions. In this review, we consolidate current knowledge on the mechanistic pathways, processing windows, and functional potential of CO₂ laser-modified cotton substrates. By integrating findings from recent studies and identifying critical research gaps, the review supports the development of predictable, scalable, and sustainable laser-based cotton textile processing technologies. Full article

Horizontal wells combined with multi-stage fracturing are key techniques for extracting tight oil formation. However, due to the ultra-low permeability and porosity of reservoirs, energy depletion occurs rapidly, necessitating external supplements to sustain production. During the hydraulic fracturing process, large volumes of fracturing fluid are injected into reservoirs, increasing its pressure to a certain extent. However, due to the oil-wet nature of the formation, the fracturing fluid cannot penetrate the rock, failing to enhance oil recovery during the shut-in period. Surfactant-based nanofluids have been introduced as fracturing fluid additives to reverse rock wettability, thereby boosting imbibition-driven recovery. Although the imbibition has been studied to inspire the tight oil recovery, few studies have demonstrated the imbibition in enhanced fossil hydrogen energy, which further promotes the imbibition recovery. In this paper, complex nanofluid dispersions (CND) have been proved to enhance the tight reservoir pressure. Through contact angle and imbibition experiments, it is shown that CND can transform oil-wet rock to water-wet, reduce the adhesion of oil, and improve the ultimate oil recovery through the imbibition effect. Then, core flow testing experiments were conducted to show CND can decrease the flow resistance and improve the swept area of the injected fluid. In the end, pressure transmission tests were conducted to show CND can enhance the formation energy and production after fracturing. Results demonstrate that CND enables the fracturing fluid to travel further away from the hydraulic fractures, thus decreasing the depletion of tight formation pressure and maintaining a higher oil production rate. Results help optimize the design of the hydraulic fracturing of tight offshore reservoirs. Full article

This study presents the synthesis, characterization, and application of magnetic magnetite–zirconium dioxide (Fe₃O₄–ZrO₂) nanoparticles as an efficient nanoadsorbent for fluoride removal from water. The nanoparticles were synthesized using a wet chemical co-precipitation method with Fe/Zr molar ratios of 1:1, 1:2, and 1:4, and characterized using Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDS). FTIR analysis confirmed the presence of Fe₃O₄ and ZrO₂ functional groups, while XRD showed that increased Zr content led to a dominant amorphous phase. SEM and EDS analyses revealed quasi-spherical and elongated morphologies with uniform elemental distribution, maintaining the designed Fe/Zr ratios. Preliminary adsorption tests identified the Fe/Zr = 1:1 (M1) nanoadsorbent as the most effective due to its high surface homogeneity and optimal fluoride-binding characteristics. Adsorption experiments demonstrated that the material achieved a maximum fluoride adsorption capacity of 70.4 mg/g at pH 3, with the adsorption process best fitting the Temkin isotherm model (R² = 0.987), suggesting strong adsorbate–adsorbent interactions. pH-dependent studies confirmed that adsorption efficiency decreased at higher pH values due to electrostatic repulsion and competition with hydroxyl ions. Competitive ion experiments revealed that common anions such as nitrate, chloride, and sulfate had negligible effects on fluoride adsorption, whereas bicarbonate, carbonate, and phosphate reduced removal efficiency due to their strong interactions with active adsorption sites. The Fe₃O₄–ZrO₂ nanoadsorbent exhibited excellent magnetic properties, facilitating rapid and efficient separation using an external magnetic field, making it a promising candidate for practical water treatment applications. Full article

Motion control of droplets undergoing collisions with solid surface is required in a number of technological and industrial situations. Droplet dynamics after lifting off is often unpredictable, leading to a major problem in many technologies that droplets move in uncontrolled and potentially undesirable ways. Herein, this work shows that well-designed surface chemistry can produce an accurate control of force transmission to impinging droplets, permitting precise controlled droplet rebounce. The non-wetting surfaces (superhydrophobic), which mimics the water-repellent mechanism of lotus leaves via micro-to-nanoscale hierarchical morphology, with patterned “defect” of extreme wettability (hydrophilic), are synthesized by photolithography using only one inexpensive fluorine-free reagent (methyltrichlorosilane). The contact line of impinging droplet during flatting and receding is free to move on the superhydrophobic region and pinned as it meets with the hydrophilic defect, which introduces a net surface tension force allowing patterned droplet deposition, controlled droplet splitting, and directed droplet rebound. The work also achieves controlled vertical rebound of impinging droplets on inclined surfaces by controlling defect’s size, impact position, and impact velocity. This research demonstrates pinning forces as a general strategy to attain sophisticated droplet motions, which opens an avenue in future explorations, such as matter transportation, energy transformation, and object actuation. Full article

This study investigates the deterioration of granite graffiti at the Philae Archaeological Site on Bigeh Island (Aswan, Egypt), attributed to Khaemwaset (1281–1225 BCE, 19th Dynasty). These graffiti, despite being carved into durable Aswan granite, are experiencing progressive degradation due to environmental and hydrological factors. This research aims to analyze the mineralogical and chemical transformations affecting the graffiti to provide a comparative assessment of submerged and unsubmerged granite surfaces. A multi-analytical approach was employed, combining petrographical examination, X-ray diffraction (XRD), X-ray fluorescence (XRF), and scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) to identify compositional changes and deterioration patterns. The results indicate mineralogical transformations in submerged and periodically exposed surfaces. The granite primarily consists of quartz, feldspar, and biotite, with notable alterations including kaolinization and illitization and dissolution of feldspar minerals and biotite oxidation. These processes are directly linked to prolonged exposure to fluctuating water levels and recurrent wet–dry cycles, which accelerate granular disintegration, exfoliation, and surface loss. Additionally, salt crystallization, particularly halite, contributes to granite weathering, while sulfate interactions promote chemical weathering. In addition, biofilm colonization, facilitated by high moisture retention, further exacerbates surface deterioration by producing organic acids that weaken the mineral matrix. Finally, the results confirm the need for conservation interventions to mitigate ongoing damage. Full article

With the rapid advancement of urbanization, the reuse of waste concrete has become more and more important. Recycled aggregate inevitably develops microcracks during the crushing process of waste concrete, resulting in undesirable characteristics such as low density and strong water absorption. This study employed an external calcium source combined with wet carbonation to optimize the performance of recycled fine aggregate (RFA). A series of microscopic analytical techniques, including scanning electron microscopy coupled with energy-dispersive spectroscopy (SEM-EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG), and the Brunauer–Emmett–Teller (BET) method, were used to elucidate the underlying mechanisms. The results indicate that calcium-rich leachate can be obtained by soaking alkali residue in 0.3 mol/L acetic acid at a solid-to-liquid ratio of 1:6. When this leachate was further used to soak the aggregate at a solid-to-liquid ratio of 1:2, followed by carbonation in a carbonation chamber, the carbonation effect reached its optimum. Under these conditions, the saturated water absorption of the recycled fine aggregate decreased to 16%, the carbon sequestration efficiency increased by 66.8%, and pores smaller than 50 nm accounted for 62.9% of the total pore volume. Furthermore, a Bacillus strain capable of producing carbonic anhydrase was introduced to enhance the carbonation reaction. The results demonstrated that when Bacillus was added to acetic acid-modified recycled fine aggregate, the saturated water absorption further decreased to 14.6%, while the carbon sequestration efficiency significantly increased to 109.04%. Additionally, pores smaller than 50 nm constitute 79.2% of the total pore volume. These findings suggest that utilizing calcium-containing industrial waste as a calcium source for recycled fine aggregate, followed by carbonation modification, is highly effective. This approach not only improves the performance of recycled aggregates but also promotes the reutilization of industrial waste, contributing to sustainable construction practices. Full article

Food aid commodities are essential food items in global food aid programming. Some are primarily made from an extrusion of corn and soybeans. However, there are concerns about the genetically modified organisms (GMOs) of some of these grains. Hence, there is a need for alternatives to grains, like sorghum, which is not GMO. It is critical to ensure that products from this new ingredient meet the quality requirements, hence the need to profile them. An expanded formulation sorghum-soy blend (SSB), obtained from extrusion cooking, was ground using a hammer mill and analyzed for changes in properties that were affected by the transformation of starch and protein during processing. Macro- and micro-nutrients were added to these milled blends to prepare fortified blended foods (FBFs) that could meet the recommendations of Food Aid Quality Review (FAQR) report on energy, protein, and micronutrient content. The water absorption index (WAI) ranged from 2.82 to 5.90 g/g, the water solubility index (WSI) ranged from 6.22 to 18.50%, and the blends were affected by the formulation—whole/decorticated sorghum and different levels of fat. Extrusion processing caused starch gelatinization in the range of 90.69–96.26%. The pasting properties indicated that whole grain blends of SSB had lower peak time and higher final viscosity when compared to decorticated sorghum blends. The Bostwick flow rate of cooked porridges with 20% solids was within the recommended range of 9–21 cm/min. Starch digestibility significantly increased after extrusion, with a 149.65% increase in rapidly digestible starch (RDS). The protein digestibility did not vary significantly when subjected to extrusion and wet cooking. There was a significant reduction in anti-nutritional factors in the extruded binary blends of SSB when compared to respective raw blends: phytic acid was reduced by 25.33%, tannins were not found, and trypsin inhibitors were reduced by 19.50%. Thus, the extrusion processing of SSB with the subsequent addition of macro- and micro-ingredients was effective in producing FBFs with high nutritive value, comparable to FBF made from traditional ingredients. Full article