Search Results (187)

This paper documents the preliminary observations and applications of a Ka-band cloud radar newly installed at the Hong Kong International Airport. A special scanning strategy of the cloud radar was developed and is described in detail. The radar provides reasonable cloud base height data as compared with a co-located laser ceilometer, by identifying the lowest vertical layer with reflectivity > −30 dBZ and at least 150 m thick, filtering measurements influenced by rainfall, and removing noise with differential reflectivity thresholds. As demonstrated in a heavy rain case study, the radar provides good estimates of the cloud top height as well, consistent with the cloud liquid water content profiles from a microwave radiometer. The various applications of the cloud radar are then explored, including (1) observations of supercooled liquid water in clouds associated with a late-season tropical cyclone in the South China Sea, (2) monitoring of low visibility in light rain or mist at the airport region using reflectivity as well as Doppler velocity data, and (3) monitoring severe weather such as windshear and turbulence to be encountered by departing aircraft due to low-level jets and initiation of heavy rain, using the Doppler velocity and spectrum data. These observations demonstrated the robustness in the cloud radar in the observation of high clouds and the applicability of the radar’s Doppler velocity in plan position indicator scans under light rain situations. Potential research with the radar, such as visibility maps, turbulence intensity maps, and automatic cloud observations, is also discussed. Full article

The global population explosion and accelerated industrialization have led to an increasing shortage of fossil fuels and environmental contamination, underscoring the urgent need to develop innovative energy storage technologies to improve energy utilization efficiency. As pivotal components in thermal energy storage (TES) systems, phase change materials (PCMs) enable spatiotemporal matching between thermal energy supply and demand through latent heat absorption and release during phase transitions. Organic PCMs are considered ideal candidates for thermal energy storage due to their high energy storage density, stable phase transition temperature, low supercooling, and negligible phase separation. However, inherent drawbacks such as low thermal conductivity, liquid leakage, limited light absorption, and lack of functionality have hindered their widespread application in advanced thermal management systems. Herein, we systematically summarize cutting-edge functionalization strategies for PCMs, progressing from conventional methods like thermal conductive particle blending and microencapsulation to the emerging design of 3D porous thermally conductive skeletons, including metal foams, boron nitride aerogels, carbon-based aerogels, and MXene aerogels. These frameworks not only enhance thermal transport via continuous conductive pathways and impart shape stability through capillary encapsulation but also, when integrated with photo-thermal, electro-thermal, and magneto-thermal conversion properties, enable broad applications in solar photo-thermal/photo-thermo-electric conversion, thermal management of electronics and batteries, building efficiency, and wearable thermal regulation. The review further addresses current challenges and future directions, highlighting scalable 3D framework fabrication, the shift to active thermal management, and innovative applications beyond conventional domains. By establishing a microstructure–property–application correlation, this work provides valuable insights for developing next-generation high-performance multifunctional phase change composites. Full article

The cloud spatial uniformity in the test section is crucial for icing wind tunnels in aircraft icing research and airworthiness certification. To achieve uniform supercooled large droplet (SLD) icing conditions, both the spatial variation in droplet size distribution and the concentration should be considered. In this study, the spatial distribution of droplets under three SLD conditions is explored in the Aviation Industry Corporation of China Aerodynamics Research Institute (AVICARI)’s FL-61 icing wind tunnel. Measurements are conducted at 12 test points in vertical and horizontal directions using the holographic airborne cloud particle imager (HACPI) in conjunction with a two-axis traversing system. The droplet images obtained at specific test points below the test section centerline show deformation phenomena for droplets larger than 400 $\mathsf{\mu }$m. Additionally, the aspect ratio of deformed droplets increases with droplet size. The spatial evolution of the median volume diameter (MVD) and liquid water content (LWC) is examined. For two spray arrangements where the activated nozzles are positioned close, the test point where the LWC peak in the vertical direction occurs is higher than that of the MVD peak. Further analysis focuses on the size distribution of droplets in the vertical direction. The results show that the settling effect of the droplets larger than 50 $\mathsf{\mu }$m is evident under a flow velocity of 78 m/s. Meanwhile, the position where large droplets tend to appear lowers as the droplet size increases. Finally, the spatial uniformity of droplet size distributions at the same radial distance is discussed. Full article

Bulk metallic glasses exhibit unique viscoplastic flow behavior within their supercooled liquid region. Their high-temperature deformation mechanisms diverge markedly from the highly localized deformation at room temperature. This contrast offers a critical window for investigating their compressive flow models and assessing their forming potential. This study aims to systematically reveal the high-temperature compressive flow behavior of bulk metallic glasses within the supercooled liquid region and to establish a corresponding flow model. Through constant strain rate high-temperature compression experiments conducted on Zr₅₆Co₂₈Al₁₆ bulk metallic glass within its supercooled liquid region, the variations in flow stress, crystallinity, and surface deformation characteristics with temperature were systematically investigated. The results indicate that the compressive behavior of the bulk metallic glass exhibits significant temperature dependence within this temperature range. The compressive strength decreased from 689 MPa at 487 °C to 330 MPa at 507 °C, and then increased to 435 MPa at 527 °C. The angle between the fracture/bulging direction and the loading direction increased from 45° at 487 °C to 88° at 507 °C, and then decreased to 60° at 527 °C. The shear band average spacing increased from 1.797 μm at 487 °C to 2.060 μm at 507 °C, and then decreased to 1.189 μm at 527 °C. These results consistently indicate that the plastic deformability is optimal at a compression temperature of around 510 °C. By integrating the analysis of mechanical curves and morphological characteristics, the applicability of three deformation mechanisms was evaluated: highly localized shear banding, homogeneous viscoplastic flow, and dynamic structural relaxation hardening. A constitutive relationship between compressive strength and temperature was established, which accurately describes their correlation. Simultaneously, it reveals that the dominant deformation mechanism evolves through highly localized shear banding and homogeneous viscoplastic flow, ultimately transforming into dynamic structural relaxation hardening as the temperature increases. This study provides theoretical guidance for predicting the compressive flow behavior of bulk metallic glasses in the supercooled liquid region and offers critical model support for precisely controlling their thermoplastic forming processes. Full article

The water thermodynamics is characterized by polydispersity, which determines its structural and dynamic properties. This is due to the specifics of its characteristic bond: the hydrogen bond (HB). The isobars of the two fundamental thermodynamic functions, the isothermal compressibility ($K_T(P.T)$) and the isobaric expansivity (${\alpha }_P(P,T)$), show the presence of a temperature $T^{*}\simeq 315\pm 5$ K where both have a singular behavior. In this work, by carefully considering the thermal properties of the isobars of density $\rho$, specific heat $C_P$ and the self-diffusion $D_S$, we suggest the universality characteristics of this temperature. In addition, by analyzing the average intermolecular distance $d_{OO}$, in the same area of the P-T phase diagram, we demonstrate that such realities are due in the supercooled liquid state to the ratio between its two characteristic phases: the low-density liquid (LDL due to HB) and the HDL (which entirely characterizes the remaining parts of the phase diagram). Full article

Mixed-phase clouds, in which liquid droplets and ice crystals coexist at temperatures between $-38 °$C and $0 °$C, play a critical role in Earth’s radiation budget. Here, we assess the ability of climate and storm-resolving models to represent mixed-phase cloud properties and their hemispheric contrasts as inferred from satellite observations. We compare observations from the Advanced Very High Resolution Radiometer (AVHRR) and the Moderate Resolution Imaging Spectroradiometer (MODIS) with one global climate model, the Community Atmosphere Model version 6, Oslo configuration (CAM6-Oslo), and three storm-resolving models: the ICOsahedral Non-hydrostatic model (ICON), the Simple Cloud-Resolving E3SM Atmosphere Model (SCREAM), and the Goddard Earth Observing System model (GEOS). Our results show that all models reproduce the geographic distribution of mixed-phase clouds but differ significantly in detail. CAM6-Oslo yields the closest agreement in hemispheric contrasts of supercooled liquid fraction and its relationship with the liquid effective radius. Our results highlight the role of aerosol–cloud interactions and microphysics schemes in determining model performance and demonstrate that storm-resolving models still do not overcome the challenge of representing mixed-phase clouds at global scales. Full article

Supercooled liquid water (SLW) in mixed-phase clouds significantly influences precipitation efficiency and aviation safety. However, a comprehensive understanding of its vertical structure has been hampered by a lack of sustained, vertically resolved observations over the North China Plain. This study presents the first systematic analysis of SLW vertical distribution and microphysics in this region, utilizing a year-long dataset (2022) from synergistic ground-based instruments in Beijing. Our retrieval approach integrates Ka-band cloud radar, microwave radiometer, ceilometer, and radiosonde data, combining fuzzy-logic phase classification with a liquid water content inversion constrained by column liquid water path. Key findings reveal a distinct bimodal seasonality: SLW primarily occurs at mid-to-upper levels (4–7.5 km) during spring and summer, driven by convective lofting, while winter SLW is confined to lower altitudes (1–2 km) under stable atmospheric conditions. The temperature-dependent occurrence probability of SLW clouds has an annual maximum at −12 °C. The diurnal variation in SLW in summer shows peaks in the afternoon and at night, corresponding to convective cloud activity. Spring, autumn, and winter do not exhibit strong diurnal variations. Retrieved microphysical properties, including liquid water content and droplet effective radius, are consistent with in situ aircraft measurements, validating our methodology. This analysis provides a critical observational benchmark and offers actionable insights for improving cloud microphysics parameterizations in models and optimizing weather modification strategies, such as seeding altitude and timing, in this water-stressed region. Full article

In this study, bulk metallic glasses (BMGs) of Zr₅₆Cu₂₃Al₁₀Ni_11-xTa_x (x = 0, 0.5, 1, 1.5, 2, and 2.5 at.%) were prepared by copper mold suction-casting. The glass-forming ability, mechanical properties, crystallization kinetics, and corrosion resistance of the as-obtained amorphous alloys were all investigated. Experimental results showed enhanced forming ability of amorphous alloys in the presence of small amounts of Ta element. By adding appropriate amounts of Ta, the supercooled liquid region of bulk metallic glass increased from 64 K to 73 K. The critical diameter of the alloy rod at x = 1, 1.5 rose from 5 mm to 6 mm. The addition of Ta also reduced the sensitivity coefficients of the amorphous alloys to the heating rate during crystallization, while other quantities, like Eg, Ex, and Ep, all incremented. Thus, the addition of Ta declined the temperature sensitivity of amorphous alloy systems. This also increased the energy barrier required for atom rearrangement, nucleation and growth, as well as greatly enhancing the stability of the systems. At 2% Ta content, the plastic strain of the amorphous alloy exceeded 2.6%, and yield strength reached 1900 MPa. In sum, the mechanical properties of the amorphous alloys after the addition of Ta element obviously improved when compared to the original alloy. As Ta content raised, the corrosion current densities of BMGs in different corrosion solutions gradually decreased, while the corrosion potential gradually increased. Full article

The processing of bulk amorphous alloys is typically realized through superplastic deformation in the supercooled liquid region, and current research efforts predominantly focus on enhancing formability by optimizing processing parameters such as temperature and duration. However, excessive temperatures or prolonged exposure times can induce crystallization, which severely compromises the mechanical and functional properties of the alloy. This study presents the design of an ultrasonic vibration (UV)-assisted metal hot-forming apparatus that integrates an ultrasonic vibration field into the superplastic flow deformation of amorphous alloys. High-temperature compression experiments were conducted on Zr₅₅Cu₃₀Al₁₀Ni₅ amorphous alloy, and finite element simulations were performed to model the experimental process. Results show that ultrasonic vibration reduces the flow stress of the amorphous alloy, thereby enhancing its superplastic deformation capability. Simulation analysis reveals that surface effects arise from periodic interface separation between the pressure plate and the specimen caused by ultrasonic vibration, leading to a cyclic disappearance of friction forces, which manifest macroscopically as a reduction in effective friction. On the other hand, vibration introduces additional strain rates. Since the undercooled liquid of amorphous alloys exhibits non-Newtonian fluid behavior characterized by shear-thinning, ultrasonic vibration assistance can effectively reduce the apparent viscosity, thereby improving their filling capacity. Full article

Soil moisture simulations in semi-arid inland river basins remain highly uncertain due to complex land–atmosphere interactions and multiple parameterization schemes in land surface models. This study evaluated the ability of the Noah-Multiparameterization Land Surface Model (Noah-MP) to simulate soil moisture at meteorological sites representing the upstream, midstream and downstream regions of a semi-arid inland river basin with contrasting climates. A large physics-ensemble experiment (17,280 simulations per site) combining different parameterization schemes for 10 main physical processes was conducted. Natural selection, Tukey’s test and uncertainty contribution analysis were applied to identify sensitive processes and quantify their contributions to simulation uncertainty. Results indicate that Noah-MP captures soil moisture variability across the basin but with notable biases. Three physical processes—frozen soil permeability, supercooled liquid water in frozen soil and ground resistance to sublimation—were sensitive at all sites, whereas radiation transfer and surface albedo were consistently insensitive. At the upstream and midstream sites, supercooled liquid water contributed about half of the ensemble uncertainty, and at the downstream site ground resistance to sublimation contributed roughly 51%. These findings reveal which physical processes most strongly affect Noah-MP soil moisture simulations in semi-arid basins and provide guidance for improving parameterization schemes to reduce uncertainty. Full article

Cloud liquid water content (CLWC) based on microwave radiometer data was investigated in this study. First, its consistency with radiosonde-based CLWC was established. Integrated CLWC was also checked against the liquid water path. CLWC performance in four weather types was considered: dense fog, clouds in spring, rainstorms, and typhoons. CLWC provides new insights into weather events. In particular, it could be useful for nowcasting low visibility associated with sea fog. It was also found to be inversely proportional to visibility in two cases of low visibility in Hong Kong. In springtime, low-level clouds and liquid water were found to exist extensively inside clouds. In rainstorm cases, supercooled cloud liquid water was absent during heavy rain but may exist within clouds when rain stops or light rain occurs. Similar observations were made in typhoon cases, namely during the direct impact of Typhoon Wipha on Hong Kong. Supercooled cloud liquid was present when outer rainbands of the typhoon affected Hong Kong with a smaller amount of rainfall. However, when Hong Kong was hit by a typhoon’s eyewall, rain was heavier, and supercooled liquid water was absent. These features are consistent with the radiosonde-based CLWC profiles. Radiometer-based CLWC is pseudocontinuous and provides additional insight into liquid water distribution in clouds under various weather conditions. Full article

This study systematically investigates the effect of substituting Copper (Cu) with Nickel (Ni) on the glass-forming ability (GFA) and corrosion resistance of a Pt-based bulk metallic glass (BMG). We demonstrate that a minor substitution of 5 at.% Ni for Cu in the Pt₄₀Pd₂₀Cu₂₀P₂₀ base alloy significantly enhances both properties. The GFA is markedly improved, as evidenced by the supercooled liquid region (ΔTx) widening from 68 K to 91 K. The optimized Pt₄₀Pd₂₀Cu₁₅Ni₅P₂₀ alloy exhibits a compressive fracture strength of 1.38 GPa. Electrochemical tests in a 3.5 wt.% NaCl solution reveal a substantial improvement in corrosion resistance. Compared to the Ni-free baseline alloy, the passive film resistance (R_f) and charge-transfer resistance (R_ct) of the Ni-containing alloy are enhanced by factors of 2.75 and 2.60, respectively. This superior performance is attributed to a synergistic effect wherein Ni alloying both stabilizes the amorphous structure and promotes the formation of a more robust passive film. This work presents a viable strategy for designing cost-effective, high-performance multi-component BMGs for applications in aggressive chloride environments. Full article

Cloud seeding is a targeted weather modification strategy aimed at enhancing precipitation, particularly in regions facing water scarcity. This study evaluates the impacts of wintertime cloud seeding events in the western United States, focusing on three regions: the Lake Tahoe area, the Santa Rosa Range, and the Ruby Mountains, using an integrated remote sensing approach. Ground-based AgI generators were deployed to initiate seeding, and the atmospheric responses were assessed using multispectral observations from the Advanced Baseline Imager (ABI) aboard the GOES-R series satellites and regional radar reflectivity mosaics derived from NEXRAD data. Satellite-derived cloud microphysical properties, including cloud top brightness temperatures, optical thickness, and phase indicators, were analyzed in conjunction with radar reflectivity to evaluate microphysical changes associated with seeding. The analysis revealed significant regional variability: Tahoe events consistently exhibited strong seeding signatures, such as droplet-to-ice phase transitions, cloud top cooling, and thickened cloud structures, often followed by increased radar reflectivity. These outcomes were linked to favorable atmospheric conditions, including colder temperatures, elevated mid-to-upper tropospheric moisture, and sufficient supercooled liquid water. In contrast, events in the Santa Rosa Range generally showed weaker responses due to warmer, drier conditions and limited cloud development, while the Ruby Mountains presented mixed outcomes. This study improves the detection of seeding impacts by characterizing microphysical changes and precipitation development, capturing the progression from initial cloud phase transitions to hydrometeor development. The results highlight the importance of aligning seeding strategies with local atmospheric conditions and demonstrate the practical value of satellite-based tools for evaluating seeding effectiveness, particularly in data-sparse regions. Overall, this work contributes to advancing both the scientific insight and operational practices of weather modification through remote sensing. Full article

Latent heat thermal energy storage (LHTES) based on phase change materials (PCMs) is receiving increasing interest since it offers high energy storage density while enabling the integration of variable renewable energies, hence boosting the transition towards a climate-neutral future. Despite the advantages that PCMs offer in providing a nearly isothermal solid–liquid phase transition, they still face some challenges that limit their deployment in real applications such as low thermal conductivity, phase separation, and supercooling, which affect charging and discharging rates. X-ray computed tomography (XCT) is a non-destructive imaging technique widely used in materials science for both qualitative and quantitative analysis of material microstructures and their evolution. Recent advances in laboratory-XCT instrumentation enabled short acquisition times on the order of tens of seconds which allows the investigation of dynamic processes in situ by time-lapse XCT measurements. These advances open new opportunities for revealing information on the morphology of solid–liquid PCMs. Despite the fact that XCT imaging has significant potential for energy research, its application in the field of PCMs is fairly new. A key enabler of applications of XCT to PCMs is the density difference between solid and liquid PCMs, which was found to be higher than 7% for all investigated PCMs. This enabled solid and liquid phases to be distinguished one from the other and properly quantified over time. The present work reviews the principles of laboratory-based XCT and the recent applications of XCT technology in the characterisation of PCMs, with emphasis on the study of the solid–liquid phase transition and validation of numerical PCM models by addressing the potentialities and challenges of XCT in PCM research. Full article

Cobalt-based bulk metallic glasses (Co-based BMGs) offer a combination of high strength, corrosion resistance, and soft magnetic properties, yet their limited glass-forming ability (GFA) and poor room-temperature ductility restrict broader application. In this study, a microalloying strategy was applied to the Co₆₁Nb₈B₃₁ base composition to develop Co-Nb-B-Si and Co-Fe-Nb-B-Si systems. The effects of Si addition and Fe substitution on GFA, thermal stability, and mechanical properties were systematically investigated. Si doping combined with Co/B ratio tuning broadened the supercooled liquid region and increased the critical glass-forming diameter from 1 mm to 3 mm. Further addition of 5 at.% Fe expanded the supercooled liquid region and enabled the fabrication of a fully amorphous plate with 1 mm thickness. The optimized Co₆₃Nb₈B₂₇Si₂ alloy exhibited a compressive strength of 5.18 GPa and a plastic strain of 3.81%. Fracture surface analysis revealed ductile fracture features in the Si-containing alloy and brittle characteristics in Fe-rich compositions. These results demonstrate that microalloying is effective in optimizing the balance between GFA and mechanical performance of Co-based BMGs, offering guidance for composition and processing design. Full article