Search Results (32)

Adsorption of mononuclear tris(bipyridine) ruthenium(II) complexes and binuclear tris(bipyridine) ruthenium(II) complexes equipped with carboxyl groups (-COOH) on the (111) surface of TiO₂ crystal in anatase form was modeled using Monte Carlo simulations, applying the Universal force field. It was shown that the adsorption efficiency of the ruthenium-based dyes on the TiO₂ surface depends on the position of the anchoring -COOH group in the molecular structure. The increase in the number of possible anchor groups in the dyes increases their ability to deposit on the surface of semiconductors. The chemisorbed molecules, such as mononuclear tris(bipyridine) ruthenium(II) complexes with the -COOH group in para position (RuLp) and binuclear tris(bipyridine) ruthenium(II) complexes called B3 with two anchoring -COOH groups and phenyl in the spacer, interact with the adsorber and other neighboring dyes, changing their electron and optical properties. The obtained computational results help to explain the behavior of the dyes on the TiO₂ surface, giving impact on their DSSC applications. Full article

This study investigates a series of surface-active ionic liquids (SAILs), including both imidazolium monocationic and dicationic compounds. These compounds are promising candidates, as they combine unique surface properties with antimicrobial activity, aligning with modern trends in chemistry. The research encompasses synthesis, thermal analysis, and topographical assessment, focusing on the impact of the amphiphilic cationic moiety, alkyl chain length, and the spatial relationship between the imidazolium ring and the phenyl substituent on the compounds’ physicochemical behavior. An added value of this work lies in the integration of theoretical calculations related to their behavior in solution and at the air–water interface, revealing spontaneous adsorption (negative Gibbs free energy of adsorption values, ΔG⁰_ads). The results indicate that dicationic imidazolium SAILs have a greater tendency to form micelles but are less effective at reducing surface tension compared to their monocationic counterparts. Topography analyses of SAILs with 12 carbon atoms further highlight these differences. Notably, the dicationic SAIL with 12 carbon atoms in the spacer exhibited an impressive MIC of 0.007 mmol L⁻¹ against Candida albicans, consistent with findings showing that dicationic SAILs outperformed conventional antifungal agents, such as amphotericin B and fluconazole, at equivalent concentrations. Overall, the synthesized SAILs demonstrate superior surface activity compared to commercial surfactants and show potential as disinfectant agents. Full article

Thiosemicarbazones (TSCs) with their modular character (thiosemicarbazides + carbonyl compound) allow broad variation of up to four substituents on the main R¹R²C=N(1)–NH–C(S)–N(4)R³R⁴ core and are thus interesting tools for the formation of conjugates or the functionalization of nanoparticles (NPs). In this work, di-2-pyridyl ketone was introduced for the coordination of metals and 9-anthraldehyde for luminescence as R¹ and R² to TSCs. R³ and R⁴ substituents were varied for the formation of conjugates. Amino acids were introduced at the N4 position to produce [R¹R²TSC–spacer–amino acid] conjugates. Further, functions such as phosphonic acid (R–P(O)(OH)₂), D-glucose, o-hydroquinone, OH, and thiol (SH) were introduced at the N4 position producing [R¹R²TSC–spacer–anchor group] conjugates for direct NP anchoring. Phenyl, cyclohexyl, benzyl, ethyl and methyl were used as spacer units. Both phenyl phosphonic acid TSC derivatives were bound on TiO₂ NPs as a first example of direct NP anchoring. [R¹R²TSC–spacer–end group] conjugates including OH, S–Bn (Bn = benzyl), NH–Boc (Boc = tert-butyloxycarbonyl), COOtBu, C≡CH, or N₃ end groups were synthesized for potential covalent binding to functional molecules or functionalized NPs through amide, ester, or triazole functions. The synthesis of the thiosemicarbazides H₂NNH–C(S)–NR₃R₄ starting from amines, including amino acids, SCCl₂ or CS₂, and hydrazine and their condensation with dipyridyl ketone and anthraldehyde led to 34 new TSC derivatives. They were synthesized in up to six steps with overall yields ranging from 10 to 85% and were characterized by a combination of nuclear magnetic resonance spectroscopy and mass spectrometry. UV-vis absorption and photoluminescence spectroscopy allowed us to easily trace the dipyridyl imine and anthracene chromophores. Full article

A small library of 79 substituted phenylsulfonamidoalkyl sulfamates, 1b–79b, was synthesized starting from arylsulfonyl chlorides and amino alcohols with different numbers of methylene groups between the hydroxyl and amino moieties yielding intermediates 1a–79a, followed by the reaction of the latter with sulfamoyl chloride. All compounds were screened for their inhibitory activity on bovine carbonic anhydrase II. Compounds 1a–79a showed no inhibition of the enzyme, in contrast to sulfamates 1b–79b. Thus, the inhibitory potential of compounds 1b–79b towards this enzyme depends on the substituent and the substitution pattern of the phenyl group as well as the length of the spacer. Bulkier substituents in the para position proved to be better for inhibiting CAII than compounds with the same substituent in the meta or ortho position. For many substitution patterns, compounds with shorter spacer lengths were superior to those with long chain spacers. Compounds with shorter spacer lengths performed better than those with longer chain spacers for a variety of substitution patterns. The most active compound held inhibition constant as low as K_i = 0.67 μM (for 49b) and a tert-butyl substituent in para position and acted as a competitive inhibitor of the enzyme. Full article

In this study, we investigated the conformational abilities of n,n’-(Alkanediyl)-bis(2-phenyl-3,5-dihydro-4H-imidazol-4-one)s (1) to gain insight into their biological potential as a platform for the generation of various QACs. Among the conformers of 1, due to the flexibility of the polymethylene fragment, the phenyl rings can take on different mutual arrangements, while there is a clear tendency for the formation of π–π interactions. From the point of view of the reactivity to alkylating agents, a preliminary conclusion can be drawn about the favorable mutual arrangement of imidazolone rings located at a sufficient distance to carry out both mono- and bisalkylation to obtain bis-QAC. Full article

Some original poly(tetrasubstituted imidazole)s incorporating different units were synthesized and characterized. These materials were obtained via a cascade polycondensation process assisted by microwave irradiation that was developed by our team. This time, we integrated two well-known chromophore structures into the macromolecular backbone, which were benzothiadiazole (BTD) and diketopyrrolopyrrole (DKPP). These new polymers were fully characterized: their chemical structures were confirmed using NMR spectroscopy and their thermal, optical and electrochemical properties were investigated and compared with a reference polymer containing a phenyl spacer instead of the mentioned chromophore units. These materials were found to exhibit a large Stokes shift of up to 350 nm. Furthermore, a polymer presenting large absorption on the UV–visible range and an emission close to the near-infrared region was obtained by coupling the mentioned moieties. According to the established properties of this latter polymer, it presents a potential for applications in biological imaging or optoelectronic devices. Full article

A series of cationic p-tert-butylcalix[4]arenes, with side-arms that are functionalized with imidazolium groups, have been synthesized in good yields. The parent tetrahydroxy para-t-butyl-calix[4]arene was dialkylated at the phenolic hydrogen atoms using α,ω-dibromo-alkanes to yield bis(mono-brominated) alkoxy-chains of variable length. The brominated side-arms in these compounds were then further alkylated with substituted imidazoles (N-methylimidazole, N-(2,4,6-trimethyl-phenyl)imidazole, or N-(2,6-di-isopropylphenyl)imidazole) to yield a series of dicationic calixarenes with two imidazolium groups tethered, via different numbers of methylene spacers (n = 2–4), to the calixarene moiety. Related tetracationic compounds, which contain four imidazolium units linked to the calix[4]arene backbone, were also prepared. In all of these compounds, the NMR data show that the calixarenes adopted a cone configuration. All molecules were characterized by NMR spectroscopy and by MS studies. Single crystal X-ray diffraction studies were attempted on many mono-crystals of these cations, but significant disorder problems, partly caused by occluded solvent in the lattice, and lack of crystallinity resulting from partial solvent loss, precluded the good resolution of most X-ray structures. Eventually, good structural data were obtained from an unusually disordered single crystal of 5a, (1,3)-Cone-5,11,17,23-tetra-t-butyl-25,27-di-hydroxy-26,28-di-[2-(N-2,6-diisopropylphenyl-imidazolium)ethoxy]calix[4]arene dibromide and its presumed structure was confirmed. The structure revealed the presence of H-bonded interactions and some evidence of π-stacking. Some of these imidazolium salts were reacted with nickelocene to form the nickel N-heterocyclic carbene (NHC) complexes 7a–7d. A bis-carbene nickel complex 8 was also isolated and its structure was established by single crystal X-ray diffraction studies. The structure was disordered and not of high quality, but the structural data corroborated the spectroscopic data. Full article

In this work, we report on the in vitro and in vivo pharmacological properties of LP1 analogs to complete the series of structural modifications aimed to generate compounds with improved analgesia. To do that, the phenyl ring in the N-substituent of our lead compound LP1 was replaced by an electron-rich or electron-deficient ring and linked through a propanamide or butyramide spacer at the basic nitrogen of the (−)-cis-N-normetazocine skeleton. In radioligand binding assays, compounds 3 and 7 were found to display nanomolar binding affinity for the μ opioid receptor (MOR) (K_i = 5.96 ± 0.08 nM and 1.49 ± 0.24 nM, respectively). In the mouse vas deferens (MVD) assay, compound 3 showed an antagonist effect against DAMGO ([D-Ala², N-MePhe⁴, Gly-ol]-enkephalin), a highly selective MOR prototype agonist, whereas compound 7 produced naloxone reversible effect at MOR. Moreover, compound 7, as potent as LP1 and DAMGO at MOR, was able to reduce thermal and inflammatory pain assessed by the mouse tail-flick test and rat paw pressure thresholds (PPTs) measured by a Randall–Selitto test. Full article

Ecdysone receptor (EcR) and chitinase play a critical role in the molting stage of insect pests. Each of them is considered a promising target for the development of novel insect growth regulators (IGRs). In the present paper, a total of 24 (23 novel) hexacyclic pyrazolamide derivatives were designed and synthesized by reducing the heptacycle and inserting small flexible linkers on the basis of the previously discovered dual-target compound D-27 acting simultaneously on EcR and Ostrinia furnacalis chitinase (OfChtI). Their insecticidal activities against Plutella xylostella, Spodoptera frugiperda, and Ostrinia furnacalis larvae were evaluated. The results revealed that the insecticidal activity was not significantly enhanced when the heptacycle on the pyrazole ring was reduced to a hexacycle. However, the insertion of an additional methylene spacer between the substituted phenyl ring and the amide bond can improve the insecticidal activity. Among the derivatives, the most potent compound, 6j, exhibited promising insecticidal activities against P. xylostella and S. frugiperda. Further protein binding assays and molecular docking indicated that 6j could target both EcR and OfChtI, and is a potential lead compound for IGRs. The present work provides valuable clues for the development of new dual-target IGRs. Full article

Carotenoids are ubiquitous pigment systems in nature which are relevant to a range of processes, such as photosynthesis, but the detailed influence of substitutions at the polyene backbone on their photophysics is still underexplored. Here, we present a detailed experimental and theoretical investigation of the carotenoid 13,13′-diphenylpropyl-β-carotene using ultrafast transient absorption spectroscopy and steady-state absorption experiments in n-hexane and n-hexadecane, complemented by DFT/TDDFT calculations. In spite of their bulkiness and their potential capability to “fold back” onto the polyene system, which could result in π-stacking effects, the phenylpropyl residues have only a minor impact on the photophysical properties compared with the parent compound β-carotene. Ultrafast spectroscopy finds lifetimes of 200–300 fs for the S₂ state and 8.3–9.5 ps for the S₁ state. Intramolecular vibrational redistribution with time constants in the range 0.6–1.4 ps is observed in terms of a spectral narrowing of the S₁ spectrum over time. We also find clear indications of the presence of vibrationally hot molecules in the ground electronic state (S₀*). The DFT/TDDFT calculations confirm that the propyl spacer electronically decouples the phenyl and polyene π-systems and that the substituents in the 13 and 13′ positions point away from the polyene system. Full article

Donor–acceptor (D–A) small molecules are regarded as promising hole-transporting materials for perovskite solar cells (PSCs) due to their tunable optoelectronic properties. This paper reports the design, synthesis and characterization of three novel isomeric D-π-A small molecules PY1, PY2 and PY3. The chemical structures of the molecules consist of a pyrazolo[1,5-a]pyrimidine acceptor core functionalized with one 3,6-bis(4,4′-dimethoxydiphenylamino)carbazole (3,6-CzDMPA) donor moiety via a phenyl π-spacer at the 3, 5 and 7 positions, respectively. The isolated compounds possess suitable energy levels, sufficient thermal stability (T_d > 400 °C), molecular glass behavior with T_g values in the range of 127–136 °C slightly higher than that of the reference material Spiro-OMeTAD (126 °C) and acceptable hydrophobicity. Undoped PY1 demonstrates the highest hole mobility (3 × 10⁻⁶ cm² V⁻¹ s⁻¹) compared to PY2 and PY3 (1.3 × 10⁻⁶ cm² V⁻¹ s⁻¹). The whole isomers were incorporated as doped HTMs in planar n-i-p PSCs based on double cation perovskite FA_0.85Cs_0.15Pb(I_0.85Br_0.15)₃. The non-optimized device fabricated using PY1 exhibited a power conversion efficiency (PCE) of 12.41%, similar to that obtained using the reference, Spiro-OMeTAD, which demonstrated a maximum PCE of 12.58% under the same conditions. The PY2 and PY3 materials demonstrated slightly lower performance in device configuration, with relatively moderate PCEs of 10.21% and 10.82%, respectively, and slight hysteresis behavior (−0.01 and 0.02). The preliminary stability testing of PSCs is also described. The PY1-based device exhibited better stability than the device using Spiro-OMeTAD, which could be related to its slightly superior hydrophobic character preventing water diffusion into the perovskite layer. Full article

Vaccinia H1-related phosphatase (VHR) is a dual-specific phosphatase that is a promising potential target for the treatment of many human diseases. In this work, we have proposed a series of 6-(4-chlorophenyl)-N-aryl-4-(trichloromethyl)-4H-1,3,5-oxadiazin-2-amines as potential VHR inhibitors. The SuperPred online server predicts VHR inhibition for the studied compounds with a probability of 88.88–98.51%. To establish the efficiency of binding of 4H-1,3,5-oxadiazine derivatives to the active site of VHR (PDB ID: 3F81) in the AutoDock Vina program, we have carried out molecular docking studies. According to the results, the studied compounds effectively interact with the hydrophobic region of the VHR active site due to aromatic rings and the trichloromethyl group, but the polar catalytic cavity is not involved, and therefore inhibition cannot be effective. In this regard, we have built a number of model compounds containing a sulfate group and its derivatives (methyl ester and amide) in the para-position of the arylamine fragment. According to the results of molecular docking, these compounds effectively bind to the polar catalytic cavity of the enzyme due to hydrogen bonds, but due to the relative rigidity of their molecules, hydrophobic interactions are not fully realized. Therefore, in these model compounds between the arylamine fragment and the sulfo group, we introduced a spacer with a length of one to three methylene groups. Hit compounds have been selected—2-(4-((6-(4-chlorophenyl)-4-(trichloromethyl)-4H-1,3,5-oxadiazin-2-yl)amino)phenyl)ethane-1-sulfonic acid and its amide. Full article

Two novel D-A-π-A1 metal-free organic dyes of the KEA series containing benzo[d][1,2,3]thiadiazole (isoBT) internal acceptor, indoline donors fused with cyclopentane or cyclohexane rings (D), a thiophene as a π-spacer, and a cyanoacrylate as an anchor part were synthesized. Monoarylation of 4,7-dibromobenzo[d][1,2,3]thiadiazole by Suzuki-Miyamura cross-coupling reaction showed that in the case of indoline and carbazole donors, the reaction was non-selective, i.e., two monosubstituted derivatives were isolated in each case, whereas only one mono-isomer was formed with phenyl- and 2-thienylboronic acids. This was explained by the fact that heterocyclic indoline and carbazole fragments are much stronger donor groups compared to thiophene and benzene, as confirmed by cyclic voltammetry measurements and calculation of HOMO energies of indoline, carbazole, thiophene and benzene molecules. The structure of monoaryl(hetaryl) derivatives was strictly proven by NMR spectroscopy and X-ray diffraction. The optical and photovoltaic properties observed for the KEA dyes showed that these compounds are promising for the creation of solar cells. A comparison with symmetrical benzo[c][1,2,3]thiadiazole dyes WS-2 and MAX114 showed that the asymmetric nature of benzo[d][1,2,3]thiadiazole KEA dyes leads to a hypsochromic shift of the ICT band in comparison with the corresponding benzo[c][1,2,5]thiadiazole isomers. KEA dyes have a narrow HOMO-LUMO gap of 1.5–1.6 eV. Amongst these dyes, KEA321 recorded the best power efficiency (PCE), i.e., 5.17%, which is superior to the corresponding symmetrical benzo[c][1,2,3]thiadiazole dyes WS-2 and MAX114 (5.07 and 4.90%). Full article

In the present work, we use a merger of computational and biochemical techniques as a rational guideline for structural modification of benzofuran derivatives to find pertinent structural features for the butyrylcholinesterase inhibitory activity and selectivity. Previously, we revealed a series of 2-phenylbenzofuran compounds that displayed a selective inhibitory activity for BChE. Here, in an effort to discover novel selective BChE inhibitors with favorable physicochemical and pharmacokinetic profiles, 2-benzylbenzofurans were designed, synthesized, and evaluated as BChE inhibitors. The 2-phenylbenzofuran scaffold structure is modified by introducing one methylene spacer between the benzofuran core and the 2-phenyl ring with a hydroxyl substituent in the para or meta position. Either position 5 or 7 of the benzofuran scaffold was substituted with a bromine or chlorine atom. Further assessment of the selected list of compounds indicated that the substituent’s nature and position determined their activity and selectivity. 5-bromo-2-(4-hydroxybenzyl)benzofuran 9B proved to be the most potent butyrylcholinesterase inhibitor (IC₅₀ = 2.93 µM) of the studied series. Computational studies were carried out to correlate the theoretical and experimental binding affinity of the compounds to the BChE protein. Full article

Four new zinc(II) Schiff base complexes with carbazole electron donor units and either a 2,3-pyrazinedicarbonitrile or a phthalonitrile acceptor unit were synthesized. The donor units are equipped with two bulky 2-ethylhexyl alkyl chains to increase the solubility of the complexes in organic solvents. Furthermore, the effect of an additional phenyl linker between donor and acceptor unit on the photophysical properties was investigated. Apart from prompt fluorescence, the Schiff base complexes show thermally activated delayed fluorescence (TADF) with quantum yields up to 47%. The dyes bearing a phthalonitrile acceptor emit in the green–yellow part of the electromagnetic spectrum and those with the stronger 2,3-pyrazinedicarbonitrile acceptor—in the orange–red part of the spectrum. The emission quantum yields decrease upon substitution of phthalonitrile with 2,3-pyrazinedicarbonitrile and upon introduction of the phenyl spacer. The TADF decay times vary between 130 µs and 3.5 ms at ambient temperature. The weaker phthalonitrile acceptor and the additional phenyl linker favor longer TADF decay times. All the complexes show highly temperature-dependent TADF decay time (temperature coefficients above −3%/K at ambient conditions) which makes them potentially suitable for application as molecular thermometers. Immobilized into cell-penetrating RL-100 nanoparticles, the best representative shows temperature coefficients of −5.4%/K at 25 °C that makes the material interesting for further application in intracellular imaging. Full article