Search Results (71)

The valorization of lignocellulosic residues into bioactive and biodegradable materials offers a sustainable route for functional food packaging. In this study, hazelnut shells were exploited through an integrated process enabling the integrated recovery of polyphenols and cellulose. Polyphenols were extracted via hot water, liquid–liquid partitioning, and column chromatography, yielding a purified bioactive fraction. The residual biomass after polyphenol recovery was used for cellulose extraction (approximately 23% w/w) and converted into carboxymethyl cellulose (CMC) with a degree of substitution (DS) of 0.77. Active CMC films incorporating polyphenolic extracts exhibited improved mechanical performance, reaching tensile strengths of about 78 MPa and elongation at break values above 20%, while reducing water solubility to approximately 31%. The addition of carnauba wax further enhanced water resistance while modulating flexibility and stiffness. Attenuated Total Reflectance-Fourier Transform Infrared spectroscopy (ATR-FTIR) and scanning electron microscopy (SEM) analyses confirmed the conversion of crystalline cellulose into amorphous CMC and the successful incorporation of additives within the polymer matrix. The resulting films showed tunable mechanical, optical, and barrier properties, along with UV-blocking and antioxidant activity. These findings demonstrate that hazelnut shell-derived CMC films enriched with polyphenols and carnauba wax represent promising candidates for a sustainable platform for active food packaging applications, supporting a circular waste-to-value approach. Full article

Miscanthus (Panicum virgatum L.), a biomass material known for its rapid growth and high biomass yield, is considered a suitable resource for producing biobased materials. Nevertheless, the dense and complex structure of Miscanthus hinders its full utilization. In this study, alkaline sulfite pretreatment of Miscanthus was carried out to separate the cellulosic fiber fraction and sulfonated lignin. Then, the fiber fraction was used to prepare biobased seedling pots via the wet foaming technique, and the maximum compressive strength of the prepared seeding pot could reach 1317 kPa. The surface coating of the seeding pot with wood wax oil further improved its hydrophobicity and water resistance. Furthermore, the resulting seedling pot with good biodegradability can be used to replace the petroleum-based plastic seedling pot, which could reduce plastic pollution. In addition, the fractionated sulfonated lignin was directly utilized as a fertilizer, showcasing a 6% increase in root and stem height of cabbage and a 15% rise in biomass (dry weight), compared to the humic acid treatment group. Therefore, this work offers a promising and sustainable strategy for the comprehensive utilization of Miscanthus, which can also be a beneficial reference for the better use of other kinds of lignocellulosic biomass. Full article

The depletion of natural resources has emerged as a major global concern, accelerating the transition from petroleum-based to renewable materials. The development of biobased ‘active’ materials is emerging especially in food packaging to ensure safety and functionality. Such packaging systems containing bioactive ingredients provide effective antioxidant, antimicrobial, and UV-protective features extending food shelf life. In this context, plant-derived secondary metabolites have gained substantial interest as functional reinforcements. These compounds not only provide food protection but also contribute to environmental safety owing to their inherent biocompatibility, biodegradability, and compostability. However, their high production costs remain a major challenge to large-scale applications. Therefore, the valorization of agro-food byproducts/wastes has been increasingly promoted. This review aims to discuss the combined use of plant secondary metabolites and biopolymers for the development of innovative packaging solutions, highlighting recent advances and functional performance. Furthermore, key challenges limiting their real-world applicability are addressed. In particular, the intrinsic hydrophilicity of many biobased materials compromises their moisture barrier and mechanical stability. To overcome this limitation, the use of biobased hydrophobic ingredients including natural waxes has emerged as a sustainable and effective approach to enhance water resistance while preserving the bioactive functionality of the packaging materials. Full article

Biodegradable materials offer promising alternatives to petroleum-based polymers. This study investigates poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) nanocomposites reinforced with 1, 3 and 5 wt.% cellulose nanocrystals (CNCs) extracted from sugarcane bagasse via melt blending. The thermal, structural, morphological and biodegradation properties were evaluated using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X-ray scattering (WAXS/SAXS), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and biodegradation tests. SEM results revealed uniform dispersion of CNCs at low concentrations, whereas agglomeration occurred at higher concentrations for both PCL and PLA. At 1 wt.% CNCs, there was minimal impact on the biodegradation rates of both polymers, despite achieving uniform dispersion. However, significant acceleration in biodegradation was observed at 5 wt.% CNCs, attributed to the enhanced hydrophilic nature of the nanocomposites. CNCs acted as nucleating agents in PCL crystallization, while reducing the crystallization rate of PLA. This led to a mass loss of 36.4% for PCL and 82.2% for PLA, correlating with increased and decreased crystallinities, respectively. The study concludes that the hydrophilic–hydrophobic balance has a more significant influence on biodegradation rates than crystallinity or CNC dispersion. Full article

Sustainable fertilizer technologies are essential to address nutrient losses, environmental pollution, and inefficiencies associated with conventional urea application. In this study, humic acid–functionalized starch (St–HA) gel coatings were developed and optimized via a Wurster fluidized-bed system to produce controlled-release urea granules, with an additional carnauba wax outer layer to further extend nutrient release duration. The coating formulation was synthesized through in situ crosslinking of tapioca starch with humic acid using N,N′-methylenebisacrylamide and potassium persulfate, yielding a cohesive film. A central composite rotatable design (CCRD) was employed to investigate the influence of atomizing air pressure, fluidizing air flow rate, fluidized-bed temperature, and spray rate on coating performance. Comprehensive characterization; including FTIR, XRD, rheological analysis, thermogravimetric studies, water retention, biodegradability, and surface abrasion, confirmed chemical crosslinking, structural stability, and mechanical robustness of the coatings. Nitrogen release analysis in both water and soil demonstrated a substantial extension of release longevity from less than 2 days (uncoated) to 18–20 days for St–HA-coated urea, and up to 28 days with the additional wax coating. Coated granules exhibited low abrasion (8–24%), high water-retention capacity, and 68% biodegradation in 60 days, ensuring environmental compatibility. The findings establish St–HA/wax hybrid coatings as a viable, eco-friendly strategy for controlled-release fertilizers, integrating renewable feedstocks with scalable industrial processing for precision nutrient management. Full article

Polyvinyl alcohol (PVA)-based films are promising biodegradable alternatives to petroleum-derived plastics; however, their high rigidity and moisture sensitivity limit practical applications. In this study, PVA/carnauba wax (CW) films were prepared via solution casting and systematically modified using four plasticizers: glycerol (GLY), sorbitol (SOR), glucose (GLU), and sucrose (SUC), at concentrations of 0.1–0.5% (v/w, relative to PVA). Thermal analysis showed that GLY and SOR effectively reduced the glass transition temperature from 52.35 °C (control) to as low as 49.14 °C (0.2% GLY) and 50.70 °C (0.4% SOR), while SUC and SOR plasticized films exhibited improved thermal stability, with the highest melting temperature observed for 0.3% SUC (80.6 °C). SEM micrographs revealed that GLY at moderate concentrations (0.2–0.3%) produced the most homogeneous film morphology, whereas SUC at higher concentrations led to surface roughness and phase separation. Water contact angle measurements showed increased surface hydrophobicity at low plasticizer contents, with 0.1% GLY and 0.2% GLU exhibiting contact angles above 100° compared to the control film (<90°). Mechanical testing demonstrated that SUC at 0.2% had the highest tensile strength (3.03 MPa) compared to 0.73 MPa (control), while GLY at 0.3% yielded the highest elongation at break (9.26%), compared to 0.62% for the unplasticized film. These results demonstrate that precise control of plasticizer type and concentration enables effective tuning of PVA/CW film properties, offering a viable strategy for designing biodegradable films tailored for packaging and agricultural applications. Full article

Coatings are often applied in the materials industry to impart hydrophobic properties to the produced materials. Commonly used coatings contain plastics as well as perfluorinated compounds, which pose challenges for environmental sustainability due to their persistence and end-of-life impacts. Coatings based on natural wax, such as rapeseed, soy, palm or beeswax, constitute a key bio-based and more sustainable alternative. These waxes exhibit high hydrophobicity while also being biodegradable, offering opportunities to replace fossil-derived coatings within circular-economy material systems. Wax coating constitutes a protective layer that undergoes biodegradation after a certain amount of time. This paper presents the results of studies concerning the development of a wax coating characterized by a coarse microstructure that increases water resistance, and an appropriate susceptibility to biodegradation. It was revealed that all the analysed coatings were susceptible to biodegradation, although their rates varied markedly depending on wax type and form. The biodegradation of palm wax in bulk form and as a thick layer was 17% and 80%, respectively, after 180 days. Palm wax exhibited a pronounced ability to bind inorganic and organic matter deposits, which reduced the degradation rate. When applied as a thin coating, palm wax did not form such a barrier. Palm wax significantly influences coating durability because its surface undergoes morphic changes induced by bio-surfactants secreted by microorganisms. These changes the adhesion of organic and inorganic matter particles, and the layer thus established limits the diffusion of oxygen, enzymes and microorganisms to the wax coating. The tests demonstrated that the addition of palm wax to wax mixtures allows the degradation rate to be controlled, and that its inhibitory effect is strongly dependent on the geometry of the material. Full article

As a key medium in industry, lubricating oil plays a significant role in reducing friction, cooling sealing and transmitting power, which directly affects equipment life and energy efficiency. Traditional mineral-based lubricating oils rely on non-renewable petroleum, and they have high energy consumption and poor biodegradability (<30%) during the production process. They can easily cause lasting pollution after leakage and have a high carbon footprint throughout their life cycle, making it difficult to meet the “double carbon” goal. Bio-based lubricating oil uses renewable resources such as cottonseed oil and waste grease as raw materials. This material offers three significant advantages: sustainable sourcing, environmental friendliness, and adjustable performance. Its biodegradation rate is over 80%, and it reduces carbon emissions by 50–90%. Moreover, we can control its properties through processes like hydrogenation, isomerization, and transesterification to ensure it complies with ISO 6743 and other relevant standards. However, natural oils and fats have regular molecular structure, high freezing point (usually > −10 °C), and easy precipitation of wax crystals at low temperature, which restricts their industrial application. In recent years, a series of modification studies have been carried out around “pour point depression-viscosity preservation”. Catalytic isomerization can reduce the freezing point to −42 °C while maintaining a high viscosity index. Epoxidation–ring-opening modification introduces branched chains or ether bonds, taking into account low-temperature fluidity and oxidation stability. The deep dewaxing-isomerization dewaxing process improves the base oil yield, and the freezing point drops by 30 °C. The synergistic addition of polymer pour point depressant and nanomaterials can further reduce the freezing point by 10–15 °C and improve the cryogenic pumping performance. The life cycle assessment shows that using the “zero crude oil” route of waste oil and green hydrogen, the carbon emission per ton of lubricating oil is only 0.32 t, and the cost gradually approaches the level of imported synthetic esters. In the future, with the help of biorefinery integration, enzyme catalytic modification and AI molecular design, it is expected to realize high-performance, low-cost, near-zero-carbon lubrication solutions and promote the green transformation of industry. Full article

In recent years, the automotive industry has experienced increasing demand for advanced paint protection solutions aimed at improving vehicle durability, preserving aesthetic appeal, and promoting environmental sustainability. This paper critically examines the main categories of paint protection coatings on wax, ceramic, graphene, and hybrid formulations by focusing on their chemical composition, application methods, protective performance, and limitations. Wax coatings remain widely adopted due to their affordability and ease of use, though they offer limited longevity. Ceramic coatings, in contrast, provide superior hardness, hydrophobicity, and resistance to scratches, corrosion, and ultraviolet (UV) degradation, albeit with higher costs and complex application procedures. Emerging graphene-based coatings demonstrate exceptional hydrophobicity, thermal stability, and durability, positioning them as potential next-generation solutions, though their environmental and economic feasibility remains under exploration. Hybrid and self-healing coatings further highlight the trend toward multifunctional, intelligent protection systems. This work also emphasizes the critical role of surface preparation in determining coating performance. Future research directions are outlined, including the development of biodegradable, zero-VOC, and intelligent self-aligning coatings, which could significantly advance sustainable automotive surface protection. Overall, this work provides a comprehensive synthesis of current technologies and identifies pathways for innovation in automotive paint protection materials. Full article

The development of advanced wound dressings that integrate favorable physico-mechanical properties with the ability to support physiological healing processes remains a critical challenge in biomaterials science. An ideal dressing should modulate the wound microenvironment, prevent infection, maintain hydration, and possess adequate strength and elasticity. This study aimed to fabricate and characterize electrospun chitosan (CS)-based 3D scaffolds dual-reinforced with halloysite nanotubes (HNTs) and cerium oxide nanoparticles (CeONPs) to enhance material properties and biological performance. HNTs were incorporated to improve electrospinnability and provide mechanical reinforcement, while CeONPs were added for their redox-modulating and anti-inflammatory activities. Composite mats were fabricated via non-capillary electrospinning. The individual and synergistic effects of HNTs and CeONPs were systematically evaluated using physico-chemical methods (SEM, EDX, WAXS, TGA, mechanical testing) and biological assays (in vitro cytocompatibility with mesenchymal stem cells, in vivo biocompatibility, and wound healing efficacy in a rat model). Scaffolds containing only HNTs exhibited defect-free nanofibers with an average diameter of 151 nm, whereas the dual-filler (CS-PEO-HNT-CeONP) composites showed less uniform fibers with a rough surface and a larger average diameter of 233 nm. The dual-filler system demonstrated significantly enhanced mechanical properties, with a Young’s modulus nearly double that of pure CS mats (881 MPa vs. 455 MPa), attributed to strong interfacial interactions. In vivo, the CS-PEO-HNT-CeONP scaffolds degraded more slowly, promoted earlier formation of a connective tissue capsule, and elicited a reduced inflammatory response compared to single-filler systems. Although epithelialization was temporarily delayed, the dual-filler composite ultimately facilitated superior tissue regeneration, characterized by a more organized, native-like collagen architecture. The synergistic combination of HNTs and CeONPs within a CS matrix yields a highly promising scaffold for wound management, offering a unique blend of tailored biodegradability, enhanced mechanical strength, and the ability to guide healing towards a regenerative rather than a fibrotic outcome, particularly for burns and traumatic injuries. Full article

Car wash wastewaters (CWW) bring growing environmental challenges due to the increasing number of vehicles worldwide and they require novel, optimized and sustainable treatment methods. They are highly heterogenous, typically containing complex mixtures of detergents, waxes, oils, petroleum derivatives, corrosion inhibitors and salts, with the composition depending on installation age, geographic location, season, and weather. This study aimed to select bacteria resistant to variable and potentially toxic CWW, capable of biodegrading organic pollutants. A total of 81 strains isolated from various environmental sites were screened for tolerance to CWW environments by performing growth inhibition tests in 20 real wastewater samples with chemical oxygen demand (COD) ranging from 122 to 2267 mg O₂/dm³. Seventeen strain candidates were chosen, identified with molecular proteomics, and further evaluated for biodegradation potential. Based on the most robust isolates, six microbial consortia were developed and examined. Biodegradation experiments were conducted at ambient temperature without active pH control and nutrient supplementation to reflect real conditions occurring in wastewater treatment practice. The best-performing consortium reduced COD by 86% within 7 days. These findings should help improve the treatment of complex CWW by highlighting the potential of thoroughly selected bacteria as effective tools for bioremediation of extremely harsh environments. Full article

In the quest for greener alternatives to conventional organic solvents, Deep Eutectic Solvents (DESs) have gained significant attention due to their sustainability, biodegradability, and tunability. The use of water as an active and genuine component has recently led to the emergence of water-based DESs (wb-DESs). Here, a careful experimental characterization was performed on choline acetate (ChAc)/water mixtures across a range of water:ChAc molar ratios (n = 2–6). Differential Scanning Calorimetry (DSC) revealed glass transitions between 150 and 180 K, with no first-order transitions, leading to a classification of these mixtures as Low Transition-Temperature Mixtures (LTTMs). Physicochemical measurements, including density, viscosity, electrical conductivity, and refractive index, were conducted over a broad temperature range. NMR analyses provided insights into dynamics and solvation environments, with ¹H T1_slow relaxation times reaching their lowest value at n = 2, consistent with the formation of a strong hydrogen-bonding network. The n = 2 mixture was further investigated using Small and Wide-Angle X-ray Scattering (S-WAXS) and ab initio molecular dynamics (AIMD). These studies, jointly with ¹H NMR choline diffusion coefficient, directly challenge previous claims of the existence of aggregation phenomena in wb-DES. The simulation revealed a well-organized solvation structure, where acetate and water synergistically stabilize the choline cation through a cooperative hydrogen-bonding network. These findings highlight the impact and significance of an integrated physicochemical study in guiding the rational development of new sustainable systems, such as wb-DESs. Full article

The potent and selective ‘genetic zipper’ method for insect pest control consists of three essential components: an antisense DNA (the finder), its complementary mature rRNA or pre-rRNA of the pest (the target), and the host’s endogenous DNA-guided rRNase (the degrader). Although this approach has been validated, the spectrum of effective rRNA targets remains insufficiently explored. In this study, we report for the first time the insecticidal efficacy of a novel oligonucleotide insecticide, Eriola-11, which targets the mitochondrial 16S rRNA of the woolly apple aphid Eriosoma lanigerum Hausmann. We hypothesized that the antisense-mediated silencing of mitochondrial rRNA would impair aphid viability and lead to physiological disruptions associated with mitochondrial energy metabolism. Eriola-11 was applied either once or twice (with a 24 h interval) to aphid-infested plants, and aphid mortality was recorded over 14 days. Mitochondrial 16S rRNA expression levels were quantified using molecular assays, and the degradation kinetics of Eriola-11 were assessed in aphid tissue homogenates. Results showed significant insecticidal activity, with 67.55% mortality after a single treatment and 83.35% after two treatments. Treated aphids exhibited the loss of their characteristic white woolly wax covering, and mitochondrial 16S rRNA expression was reduced 0.66-fold relative to the control. Additionally, Eriola-11 was fully degraded by aphid DNases from tissue homogenates within 3 h, highlighting its rapid biodegradability. These findings establish mitochondrial 16S rRNA as a viable target for antisense insecticides and expand the catalogue of potential rRNA-based targets, offering a promising avenue for environmentally sustainable pest control strategies. Full article

This study aimed to improve the hydrophobicity of cellulose nanofibril (CNF) films using a natural wax coating. For this purpose, firstly, the selection, extraction and characterization of a natural wax and fatty acids were carried out. These compounds were extracted from the aerial part of the Halimium viscosum plant. The chromatogram resulting from the chemical analysis of the extract revealed the presence of 15 compounds, with nonacosane being the major compound present. For film production, two different chemical pulps gels (sulfite and sulfate) were first characterized in terms of solids content, rheology and Fourier transform infrared spectroscopy (FTIR). The CNF films were produced by the solvent casting method, coated on one side with the extracted wax and subsequently characterized by wettability, surface energy, differential scanning calorimetry (DSC), FTIR, structural properties and water vapor permeability. The results showed that the wax-coated films exhibited a significant increase in water resistance, with a water contact angle exceeding 100°, demonstrating improved hydrophobicity. Also, the water vapor transmission rate (WVTR) of the films was drastically reduced after wax coating. Furthermore, the coated films maintained good transparency, making them a viable alternative to synthetic plastic. This study highlights the potential of natural wax coatings to improve the moisture barrier properties of biodegradable CNF films, promoting their application in sustainable packaging solutions. Full article

The growing demand for sustainable energy solutions has intensified research on phase change materials (PCMs) due to their ability to efficiently store and release thermal energy. However, traditional PCMs are often made from petroleum-derived materials or rely on processes that pose environmental concerns. The aim of this work is therefore to explore the development and use of sustainable organic PCMs, in particular those based on bio-based or waste-derived materials. Bio-based PCMs, including fatty acids, natural waxes, and biopolymers, are in fact characterized by renewability and biodegradability. Waste-derived PCMs, such as those from the lost-wax casting industry and industrial by-products, offer an environmentally friendly approach to energy storage by reusing waste materials. This paper aims to analyze the thermal, mechanical, and in-service performance of these sustainable materials, highlighting their advantages and limitations compared to the most widely used commercial PCMs. Furthermore, recent progress in the integration of sustainable PCMs into building materials is illustrated to assess their practical implementation. Challenges and limitations, as well as possible solutions and future research directions, are also discussed. Full article