Search Results (537)

The increasing contamination of agricultural soils with microplastics (MPs) represents an emerging environmental challenge. While conventional plastics such as low-density polyethylene (LDPE) persist for decades, biodegradable alternatives like polybutylene adipate terephthalate (PBAT) are promoted as eco-friendly solutions. However, their environmental safety for crop plants and soil microbiota remains poorly understood. In this study, we evaluated the effects of LDPE and PBAT microplastics (1% w/w) on the growth and physiological state of winter wheat (Triticum aestivum L.) cultivated in soil, either alone or in combination with the herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) and the plant-beneficial fungus Trichoderma citrinoviride. Growth parameters (root and shoot length and mass), germination index, chlorophyll content, antioxidant enzyme activity, and lipidomic profiles of wheat were assessed. PBAT stimulated biomass accumulation but simultaneously triggered oxidative stress and remodeled membrane phospholipids, indicating physiological disturbance. T. citrinoviride enhanced wheat growth and mitigated oxidative stress under non-contaminated conditions; however, its beneficial effect was generally suppressed in the presence of PBAT and/or 2,4-D. The results suggest that, despite its biodegradability, PBAT may pose a higher phytotoxic potential than conventional LDPE, particularly by altering oxidative balance and membrane lipid composition in wheat. Full article

Background: Guided Bone Regeneration (GBR) relies on barrier membranes, for which polylactic acid (PLA) and its copolymer poly(lactic-co-glycolic acid) (PLGA) are promising biodegradable polymers. However, their inherent hydrophobicity limits biological performance, and the evidence regarding how specific modifications affect key human cell types, particularly osteoblasts and fibroblasts, remains scattered. Methods: A systematic review was conducted to synthesize the in vitro evidence on the response of primary human osteoblasts and fibroblasts to polylactic acid-based materials. Following a pre-registered protocol (10.17605/OSF.IO/CE8KB), a comprehensive search was performed across four major databases, and the risk of bias in the included studies was assessed using an adapted OHAT tool. Results: Twenty-six studies were included, which showed that polylactic acid-based materials have limited bioactivity, and their modification significantly improves cellular responses. The incorporation of bioceramics and growth factors, or alterations in surface topography, notably enhanced osteogenic differentiation and mineralization in osteoblasts. For gingival fibroblasts, topographical modifications like micro-grooves guided cell alignment and modulated proliferation. Conclusions: Native polylactic acid-based materials display limited bioactivity. However, functionalization through bioceramics incorporation, growth factor delivery, and surface topographical modification is crucial for transforming them into bioactive scaffolds capable of achieving the dual biofunctionality required for successful GBR. Full article

Microplastics (MPs) have emerged as persistent environmental pollutants with adverse effects on ecosystems and human health. Conventional removal methods, such as filtration and sedimentation, primarily rely on physical separation without addressing the degradation of MPs, leading to their accumulation and the risk of secondary pollution. This review explores the potential of advanced oxidation processes (AOPs), including photocatalysis, electrochemical oxidation, Fenton processes, sulfate radical-based oxidation, sonochemical treatment, ozonation, and plasma technologies, which generate reactive oxygen and nitrogen species capable of promoting polymer chain scission, microbial biodegradation, and the oxidative fragmentation and mineralization of MPs into non-toxic byproducts. Hybrid AOP systems combined with biological treatments or membrane-based filtration are also examined for their effectiveness in degrading MPs, as well as for scalability and the environmental impacts of their byproducts when integrated into existing wastewater treatment systems. The review further discusses challenges related to operational parameters, energy consumption, and the formation of secondary pollutants. By identifying current knowledge gaps and future research directions, this review provides insights into optimizing AOPs and integrations of AOPs with biological treatments or membrane-based processes for sustainable MP remediation and water treatment applications. Full article

The open ocean cage aquaculture system is facing considerable challenges with disease outbreaks resulting from over-farming and the rise of resistance to antimicrobial treatment. However, the environmental consequences of antibiotic usage, including ecological contamination and the acceleration of antimicrobial resistance, underscore the urgent need for sustainable alternatives in aquaculture disease management. Lipopeptides, which are a compound that can be produced by marine bacteria such as Bacillus amyloliquefaciens or Bacillus subtilis, could represent a new solution. This review article comprehensively evaluates the feasibility of marine bacterial lipopeptides for sustainable disease management in open sea cage aquaculture. Lipopeptides, including surfactins, fengycins, iturins, and the clinically used daptomycin, have notable antiviral, antifungal, and antimicrobial properties, and can have positive effects on the immune system. Notably, lipopeptides have a remarkable antioxidant profile and excellent free radical scavenging ability, making them interesting candidates for improving disease resistance in fish relating to oxidative stress. The surfactins and iturins have amphiphilic structure and can destabilize pathogen cell membranes, inhibit biofilm formation and elicit host immune responses. This represents a paradigm shift in targeting multiple pathogens of aquaculture like Vibrio spp. and Aeromonas spp. Surfactins and iturins show broad-spectrum activity, while fengycins are selectively active against fungal threats. Daptomycin, which is primarily derived from Streptomyces, demonstrates the potential of the lipopeptide class to be developed therapeutically, which is something that tends to be overlooked. Unlike synthetic antibiotics, they are also biodegradable; therefore, there is much less environmental impact from lipopeptides. The complexity of the structure may have also some impact on the rate of development of resistance, if any. Their commercialization is possible; however, the main hurdles that need to be solved to improve aquaculture are the biologically scalable production, the economically viable purification, and the stability for practical application at sea. Integrating lipopeptides into disease management systems could also ensure the sustainability of open ocean cage aquaculture and reduce unnecessary antibiotic application. Full article

Kerosene spills from industrial processes, oil spills, and improper waste disposal can pose significant risks to human health and the environment due to their toxicity, persistence, and bioaccumulation. This review will provide an integrated overview of kerosene removal from wastewater, drawing on the most recent developments, material design recommendations, scalability concepts, and possible future directions. Conventional treatment processes such as adsorption, membrane separation, advanced oxidation processes (AOPs), and biodegradation are assessed critically in light of performance, scalability, and environmental applicability. The review focuses on the synthesis of novel materials such as nanocomposites, porous materials, functionalized polymers, and bio-inspired materials based on designs of high selectivity, reusability, and improved degradation/separation efficiencies. In addition, some emerging trends are highlighted with the review, including the use of cost–effective and sustainable materials, and the circular economy. Given the substantial knowledge- and problem-gap issues, the goal of this research is to provide pathways for researchers to develop efficient, sustainable, and scalable kerosene–contaminated wastewater treatment technologies to assist with water resourcing and conservation. Full article

Zn-based ternary deep eutectic solvents (TDESs) have attracted significant attention due to their good biodegradability, stability, and sustainability. In this work, TDESs composed of choline chloride:urea (ChCl:U) and zinc salts, ZnCl₂, Zn(CH₃COO)₂, and ZnSO₄ were synthesized and characterized by Fourier transform infrared (FTIR) spectroscopy and laser desorption ionization mass spectrometry (LDI MS). Their antibacterial activity against cariogenic Streptococcus species isolates was determined by microdilution assay, while their cytotoxic potential and effect on the intracellular reactive oxygen species (ROS) induction were analyzed on the MRC-5 fibroblast cell line by XTT, trypan blue, and DCF assays, respectively. FTIR confirmed that hydrogen bonds prevail in the molecular structure of ChCl:U:Zn salts, while LDI MS revealed the interactions between zinc salts and ChCl:U. The antibacterial TDES potential was high, especially against Streptococcus sanguinis, with ChCl:U:ZnCl₂ displaying the most promising effects (MICs 1.13–18.12 µg/mL). Cytotoxicity assessment showed that concentrations up to 100 µg/mL of all TDESs did not display significant cytotoxicity, while higher concentrations significantly reduced cell viability by increasing ROS production and cell membrane damage, outlining the safety window of up to 100 µg/mL. Strong antibacterial activity of low TDESs concentrations combined with their good biocompatibility highlights their potential as innovative candidates for biomedical application. Full article

Collagen-based biomaterials are widely used, but their relatively rapid biodegradation can limit functional duration. Such collagen constructs are widely used as barrier membranes in guided tissue and bone regeneration, where controlled degradation is essential for maintaining function. Although conventional crosslinking methods extend stability, they may introduce cytotoxicity, alter mechanical behavior, or hinder tissue integration. This study evaluated whether incorporating L-serine, a polar amino acid capable of hydrogen bonding, could modulate collagen structure and slow degradation without chemical crosslinking. L-Serine was selected because its hydroxyl-containing side chain can engage in biocompatible, hydrogen-bond–mediated interactions that offer a mild, non-crosslinking means of stabilizing collagen. Collagen scaffolds, prepared by incorporating L-serine into a collagen hydrogel followed by drying, were produced with 0–40 wt% L-serine and characterized using X-ray diffraction, Fourier-transform infrared spectroscopy, circular dichroism, and scanning electron microscopy. In vivo degradation was assessed in a subcutaneous mouse model comparing unmodified collagen, collagen containing 40 wt% L-serine, and a commercially available bilayer porcine collagen membrane (Bio-Gide^®, composed of type I and III collagen), with residual area quantified by serial sonography and histological evaluation. Low-to-moderate L-serine incorporation preserved triple-helical features, while 40 wt% led to crystalline domain formation and β-sheet enrichment. L-serine–treated collagen exhibited significantly greater residual area (2.70 ± 1.45 mm²) than unmodified collagen (0.37 ± 0.22 mm², p < 0.05), although Bio-Gide^® remained the most persistent (5.64 ± 2.76 mm²). These findings demonstrate that L-serine incorporation can modulate collagen structure and degradation kinetics through a simple, aqueous, and non-crosslinking approach. The results provide preliminary feasibility data supporting amino acid–assisted tuning of collagen resorption properties and justify further evaluation using membrane-specific fabrication and application-relevant testing. Full article

Microbial fuel cells (MFCs) offer a sustainable solution for energy generation and wastewater treatment, yet their scalability is hindered by reliance on expensive and non-renewable synthetic membranes. This study addresses the critical need for eco-friendly alternatives by conducting a bibliometric analysis of biopolymers used in MFC membrane development. Using data from Scopus and Web of Science (2012–2025), we applied quantitative and network-based methods to evaluate publication trends, collaboration patterns, and thematic evolution. The analysis identified chitosan, alginate, and cellulose as the most studied biopolymers due to their favorable proton conductivity, biodegradability, and potential for waste-derived production. Key findings include a surge in research output post-2018, strong interdisciplinary collaboration across materials science and microbiology, and emerging interest in nanomaterial integration and 3D printing for membrane enhancement. Despite promising advances, challenges persist with regard to the mechanical stability and standardization of fabrication methods. This study provides a strategic overview of the field, highlighting scientific progress and guiding future research toward scalable, high-performance biopolymer membranes for MFCs applications. Full article

Sustainable membranes for efficient separation processes are increasingly necessary to counteract the significant environmental and human health impacts of manufacturing conventional membranes, which rely on synthetic polymers, toxic solvents, and harmful additives. A greener approach currently involves the use of bio-based polymers, blending synthetic polymers with biopolymers, utilizing nanocomposites, and greener solvents. Biopolymers are emerging as an environmentally friendly alternative for developing polymeric membranes due to their biological, biodegradable, recyclable, and biocompatible properties. However, the development of sustainable biopolymer-based membranes poses greater challenges to achieving a truly low environmental impact across all aspects of raw material production, manufacturing methods, operational systems, and waste disposal. Another challenge for its market competitiveness is achieving high functional and operational performance, wider applications, low commercial costs, and strong scale-up potential. This critical review assesses the current state of sustainability in membrane manufacturing based on recent literature. It also evaluates the role of biopolymers in sustainable membranes and discusses research opportunities in biopolymer production for membrane manufacturing, highlighting biotechnological tools, the circular economy and waste valorization. Full article

Blow spinning is a low-cost and versatile method that permits the large-scale production of fibrous membranes. However, polysaccharides that show numerous merits such as biocompatibility and biodegradability often have a low spinnability due to their high chain rigidity and low ability to form sufficient entanglements. Here, we report the fabrication of polysaccharide micro-fibrous membranes from sodium alginate/polyethylene oxide solutions formulated in solvent mixtures of water and ethanol. The shear and extensional rheological responses of the solutions are characterized, and parameters including specific shear viscosity, reptation time, extensional relaxation time, and maximum stretch ratio are correlated with the concentrations of polymer, polyethylene oxide, and ethanol. It is found that flexible polyethylene oxide and poorer solvent ethanol can synergistically delay the chain relaxation during stretch and increase the stretchability of the solutions. A processability map of the solutions for blow spinning is constructed, enabling the fabrication of fibrous membranes with a fiber diameter of ~1 μm, tensile strength of 4.89 MPa, elongation at break of 15.24%, and Young’s modulus of 45.43 MPa. This study presents a new strategy to fabricate sodium alginate-based membranes, which should provide insights into the design of other polysaccharide membranes with specific functions and applications. Full article

Microplastics (MPs) have emerged as persistent and ubiquitous contaminants in aquatic and terrestrial environments, yet existing reviews often focus narrowly on conventional removal methods and lack an integrated assessment of rapidly emerging technologies. This review addresses this critical gap by providing a comprehensive and comparative synthesis of both established and next-generation approaches for MP removal from water and wastewater systems. Conventional methods such as coagulation–flocculation, sedimentation, and filtration are compared with advanced approaches including membrane separation, adsorption using engineered biochar and nanomaterials, advanced oxidation processes (AOPs), and biodegradation using microbial or enzymatic pathways. Particular emphasis is placed on hybrid and integrated systems, an area seldom summarized in prior reviews, highlighting their synergistic potential to enhance removal efficiency, reduce energy demand, and improve operational stability. Promising front-runner technologies including membrane filtration coupled with coagulation pretreatment and biochar-based magnetic adsorption systems have been identified based on a balanced performance across the key criteria of removal efficiency, scalability, energy demand, cost, byproduct risk, and environmental sustainability. The review concludes by outlining key research priorities such as standardized testing protocols, scalable biophysicochemical integration strategies, and sustainability-oriented life-cycle assessments to guide future innovation in MP management. Full article

It is well known that elevated phosphate concentrations in water bodies trigger the eutrophication process, posing adverse environmental, health, and economic consequences that necessitate effective removal solutions. Phosphate removal has therefore been widely studied using various methods, including chemical precipitation, membrane filtration, and crystallisation. However, most of these methods are often expensive or inefficient for low phosphate concentrations. Therefore, in this study, an eco-friendly, sustainable and biodegradable adsorbent was manufactured by extracting calcium ions from an industrial by-product, ground granulated blast furnace slag (GGBS) and magnesium ions from magnesium dross (MgD), then immobilising them on sodium alginate to form Ca-Mg-SA beads. The new adsorbent was applied to remove phosphate from water under different flow patterns (batch and continuous flow), initial pH levels, contact times, agitation speeds and adsorbent doses. Additionally, the degradation time of the new adsorbent, recycling potential, its morphology, formation of functional groups and chemical composition were investigated. The results obtained from batch experiments demonstrated that the new adsorbent achieved 90.2% phosphate removal efficiency from a 10 mg/L initial concentration, with a maximum adsorption capacity of 1.75 mg P/g at an initial pH of 7, a contact time of 120 min, an agitation speed of 200 rpm and an adsorbent dose of 1.25 g/50 mL. The column experiments demonstrated a 0.82 mg P/g removal capacity under the same optimal conditions as the batch experiments. The findings also showed that the adsorption process fitted well to the Freundlich and Langmuir isotherm models and followed a pseudo-second-order kinetic model. Characterisation of Ca-Mg-SA beads using EDX, SEM and FTIR confirmed successful ion immobilisation and phosphate adsorption. Furthermore, the beads fully biodegraded in soil within 75 days and demonstrated potential recycling as a fertiliser. Full article

Hybrid membranes are promising alternatives for various applications, combining a continuous polymer phase with a dispersed filler phase to achieve synergistic functional benefits. The ideal fillers should possess well-defined structures and unique properties for multi-functionality, as well as being sourced from renewable, biodegradable materials for sustainability purposes. This study explored the potential of using cellulose-based renewable materials as fillers for hybrid polymer electrolyte membranes (PEMs) in fuel cells. Cellulose whiskers (CWs), known for their high crystallinity and elastic modulus, were effectively synthesized via optimized sequential alkali treatment and acid hydrolysis. Subsequent functionalization with citric acid was performed to enhance their reinforcing properties and overall performance. Initial characterization using ATR-FTIR and XRD confirmed the CWs’ structural composition, high crystallinity, and the presence of reactive groups (sulfate and hydroxyl). The functionalization process introduced new carbonyl groups (C=O), which was verified by ATR-FTIR, while maintaining high hydrophilicity. Morphological analysis revealed that the crosslinked CWs created a denser and more compact microstructure within the membrane, leading to a significant enhancement in mechanical strength. The modifications to the cellulose whiskers not only improved structural integrity but also boosted the membrane’s ion exchange capacity (IEC) and proton conductivity compared to membranes with unmodified CWs. Initial experiments demonstrated CWs’ compatibility as a filler in a polysulfone (PSU) matrix, forming hybrid membranes suitable for fuel cell applications. Full article

Landfill leachate is highly concentrated wastewater containing non-biodegradable organic compounds and toxic substances. For this reason, advanced treatment methods are necessary for its treatment. The article discusses the possibility of treating leachate in a hybrid system combining ultrasonic pretreatment and anaerobic co-digestion with dairy wastewater in an anaerobic membrane bioreactor. Two laboratory-scale submerged anaerobic membrane reactors with a capillary module with membranes with a pore size of 0.1 μm and an effective filtration area of 0.35 m² were used in this study. An ultrasound disintegrator at 22 kHz (amplitude 14 µm) was used for leachate pretreatment. It was found that, as a result of leachate sonification (time > 10 min), the BOD₅/COD ratio in the wastewater increased from 0.1 to 0.4, and the content of dissolved organic compounds accounted for more than 40% of the total COD. Preliminary sonication of the leachate resulted in improved co-digestion efficiency in a reactor fed with conditioned leachate. A 92% reduction in organic pollutants was achieved, as well as a biogas production rate of 0.5 L biogas/g COD removed. Full article

The continuously growing amount of oily wastewater from industrial, domestic, and natural sources poses a major threat to water sustainability, and thus efficient oil–water separation techniques are of utmost relevance. Membrane separation has been a popular approach due to ease of handling, high performance, and versatility. Among all the membrane materials, polylactic acid (PLA) and its derivatives have been of interest as green materials because of their renewability, biocompatibility, and biodegradability. PLA possesses special merits, including low density, high permeability, and high thermal stability. Despite its advantages, PLA also has some demerits, such as brittleness, low tensile strength, and poor heat resistance. These limitations are addressed by PLA-based membranes that are generally reinforced using fillers, surface modification, and structure optimization methods. This review provides a comprehensive overview of recent developments of PLA and its derivatives for oil–water separation, with an emphasis on membrane design, fabrication methods, and porosity enhancement strategies. Some significant fabrication processes like Thermally Induced Phase Separation (TIPS), Nonsolvent-Induced Phase Separation (NIPS), and Freeze Solidification Phase Separation (FSPS) are elaborately addressed. In addition, the review emphasizes methods to improve porosity, mechanical strength, and fouling resistance while maintaining biodegradability. By reviewing recent progress and remaining challenges, this review outlines the future potential of PLA membranes and aims to inspire more research on green, efficient oil–water separation. Full article