Both the calculation of ground slopes at points on the map and the elevation estimation for these points bear significant importance and also have applications in various domains, such as civil engineering, road and railway design. The paper presents two methods that use level curves: one that is fast and approximate and another which is slower, but more precise. The running speed of the two proposed methods and their results are compared by performing 100 million experiments. The paper also presents how these methods can be applied to optimize embankments. An accurate method to calculate the horizontal plane of the excavation/filling when building a new house is also presented. Full article

There is increasing pressure from developers toward architects and engineers to deliver scientifically sound proposals for often complex and cost-intensive construction products. An increase in digitalization within the construction industry and the availability of intelligently built assets and overall sustainability make it possible to customize a construction product. This servitization of construction products is assumed to perform much preferably in satisfying stakeholders’ physical, psychological, and social needs. The degree to which these products are performing can be evaluated through an evidence index. This article aims to introduce a conceptual model of an evidence index and test it in the programming stage of a case study. The investigation follows the evidence-based design approach and renders evidence through key performance indicators in the programming stage of the building process. For testing the concept, a case study investigation was performed by simulating a novice research assistant, and the amount of evidence was collected and appraised for evidence index. The case study showed that key performance indicators of a servitized project could be evaluated on a four-point scale. The quality of the evidence index generation depended on the level of expertise the evaluator has in research and the skilful use of scientific databases. Full article

Although Building Information Modeling (BIM) can enhance efficiency of sustainable building projects, its adoption is still plagued with barriers. In order to incorporate BIM more efficiently, it is important to consider and mitigate these barriers. The aim of this study is to explore and develop strategies to alleviate barriers in developing countries, such as Malaysia, to broaden implementation of BIM with the aid of quantitative and qualitative approaches. To achieve this aim, a comprehensive literature review was carried out to identify the barriers, and a questionnaire survey was conducted with construction projects’ stakeholders. The ranking analysis results revealed the top five critical barriers to be “unavailability of standards and guidelines”, “lack of BIM training”, “lack of expertise”, “high cost”, and “lack of research and BIM implementation”. Comparative study findings showed that “lack of research and BIM implementation” is the least important barrier in other countries like China, United Kingdom, Nigeria, and Pakistan. Furthermore, qualitative analysis revealed the strategies to mitigate the BIM implementation barriers to enhance sustainable goals. The final outcome of this study is the establishment of a framework incorporated with BIM implementation barriers and strategies namely, the “BIM-based research framework”, which can assist project managers and policymakers towards effective sustainable construction. Full article

The introduction of the Internet of Things (IoT) in the construction industry is evolving facility maintenance (FM) towards predictive maintenance development. Predictive maintenance of building facilities requires continuously updated data on construction components to be acquired through integrated sensors. The main challenges in developing predictive maintenance tools for building facilities is IoT integration, IoT data visualization on the building 3D model and implementation of maintenance management system on the IoT and building information modeling (BIM). The current 3D building models do not fully interact with IoT building facilities data. Data integration in BIM is challenging. The research aims to integrate IoT alert systems with BIM models to monitor building facilities during the operational phase and to visualize building facilities’ conditions virtually. To provide efficient maintenance services for building facilities this research proposes an integration of a digital framework based on IoT and BIM platforms. Sensors applied in the building systems and IoT technology on a cloud platform with opensource tools and standards enable monitoring of real-time operation and detecting of different kinds of faults in case of malfunction or failure, therefore sending alerts to facility managers and operators. Proposed preventive maintenance methodology applied on a proof-of-concept heating, ventilation and air conditioning (HVAC) plant adopts open source IoT sensor networks. The results show that the integrated IoT and BIM dashboard framework and implemented building structures preventive maintenance methodology are applicable and promising. The automated system architecture of building facilities is intended to provide a reliable and practical tool for real-time data acquisition. Analysis and 3D visualization to support intelligent monitoring of the indoor condition in buildings will enable the facility managers to make faster and better decisions and to improve building facilities’ real time monitoring with fallouts on the maintenance timeliness. Full article

Validation of the EBD-SIM (evidence-based design-simulation) framework, a conceptual framework developed to integrate the use of lighting simulation in the EBD process, suggested that EBD’s post-occupancy evaluation (POE) should be conducted more frequently. A follow-up field study was designed for subjective–objective results implementation in the EBD process using lighting simulation tools. In this real-time case study, the visual comfort of the occupants was evaluated. The visual comfort analysis data were collected via simulations and questionnaires for subjective visual comfort perceptions. The follow-up study, conducted in June, confirmed the results of the original study, conducted in October, but additionally found correlations with annual performance metrics. This study shows that, at least for the variables related to daylight, a POE needs to be conducted at different times of the year to obtain a more comprehensive insight into the users’ perception of the lit environment. Full article

In the digital transformation era in the Architecture, Engineering, and Construction (AEC) industry, Cognitive Digital Twins (CDT) are introduced as part of the next level of process automation and control towards Construction 4.0. CDT incorporates cognitive abilities to detect complex and unpredictable actions and reason about dynamic process optimization strategies to support decision-making in building lifecycle management (BLM). Nevertheless, there is a lack of understanding of the real impact of CDT integration, Machine Learning (ML), Cyber-Physical Systems (CPS), Big Data, Artificial Intelligence (AI), and Internet of Things (IoT), all connected to self-learning hybrid models with proactive cognitive capabilities for different phases of the building asset lifecycle. This study investigates the applicability, interoperability, and integrability of an adapted model of CDT for BLM to identify and close this gap. Surveys of industry experts were performed focusing on life cycle-centric applicability, interoperability, and the CDT model’s integration in practice besides decision support capabilities and AEC industry insights. The evaluation of the adapted model of CDT model support approaching the development of CDT for process optimization and decision-making purposes, as well as integrability enablers confirms progression towards Construction 4.0. Full article

This study focuses on calibration and test campaigns of an IoT camera-based sensor system to monitor occupancy, as part of an ongoing research project aiming at defining a Building Management System (BMS) for facility management based on an occupancy-oriented Digital Twin (DT). The research project aims to facilitate the optimization of building operational stage through advanced monitoring techniques and data analytics. The quality of collected data, which are the input for analyses and simulations on the DT virtual entity, is critical to ensure the quality of the results. Therefore, calibration and test campaigns are essential to ensure data quality and efficiency of the IoT sensor system. The paper describes the general methodology for the BMS definition, and method and results of first stages of the research. The preliminary analyses included Indicative Post-Occupancy Evaluations (POEs) supported by Building Information Modelling (BIM) to optimize sensor system planning. Test campaign are then performed to evaluate collected data quality and system efficiency. The method was applied on a Department of Politecnico di Milano. The period of the year in which tests are performed was critical for lighting conditions. In addition, spaces’ geometric features and user behavior caused major issues and faults in the system.Incorrect boundary definition: areas that are not covered by boundaries; thus, they are not monitored Full article

Over the years, building information modelling (BIM) has undergone a significant increase, both in terms of functions and use. This tool can almost completely manage the entire process of design, construction, and management of a building internally. However, it is not able to fully integrate the functions and especially the information needed to conduct a complex energy analysis. Indeed, even if the energy analysis has been integrated into the BIM environment, it still fails to make the most of all the potential offered by building information modelling. The main goals of this study are the analysis of the interaction between BIM and energy simulation, through a review of the main existing commercial tools (available and user-friendly), and the identification and the application of a methodology in a BIM environment by using Graphisoft’s BIM software Archicad and the plug-in for dynamic energy simulation EcoDesigner STAR. The application on a case study gave the possibility to explore the advantages and the limits of these commercial tools and, consequently, to provide some possible improvements. The results of the analysis, satisfactory from a quantitative and qualitative point of view, validated the methodology proposed in this study and highlighted some limitations of the tools used, in particular for the aspects concerning the personalization of heating systems. Full article

Digital Twins (DT) are powerful tools to support asset managers in the operation and maintenance of cognitive buildings. Building Information Models (BIM) are critical for Asset Management (AM), especially when used in conjunction with Internet of Things (IoT) and other asset data collected throughout a building’s lifecycle. However, information contained within BIM models is usually outdated, inaccurate, and incomplete as a result of unclear geometric and semantic data modelling procedures during the building life cycle. The aim of this paper is to develop an openBIM methodology to support dynamic AM applications with limited as-built information availability. The workflow is based on the use of the IfcSharedFacilitiesElements schema for processing the geometric and semantic information of both existing and newly created Industry Foundation Classes (IFC) objects, supporting real-time data integration. The methodology is validated using the West Cambridge DT Research Facility data, demonstrating good potential in supporting an asset anomaly detection application. The proposed workflow increases the automation of the digital AM processes, thanks to the adoption of BIM-IoT integration tools and methods within the context of the development of a building DT. Full article

The paper proposes a new methodological approach for evaluating the comfort condition using the concept of explainable post occupancy to make the user aware of the environmental state in which (s)he works. Such an approach was implemented on a humanoid robot with social capabilities that aims to enforce human engagement to follow recommendations. The humanoid robot helps the user to position the sensors correctly to acquire environmental measures corresponding to the temperature, humidity, noise level, and illuminance. The distribution of the last parameter due to its high variability is also retrieved by the simulation software Dialux. Using the post occupancy evaluation method, the robot also proposes a questionnaire to the user for collecting his/her preferences and sensations. In the end, the robot explains to the user the difference between the suggested values by the technical standards and the real measures comparing the results with his/her preferences and perceptions. Finally, it provides a new classification into four clusters: true positive, true negative, false positive, and false negative. This study shows that the user is able to improve her/his condition based on the explanation given by the robot. Full article

Digitisation of the built environment is seen as a significant factor for innovation in the Architecture, Engineering, Construction and Operation sector. However, lack of data and information in as-built digital models considerably limits the potential of Building Information Modelling in Facility Management. Therefore, optimisation of data collection and management is needed, all the more so now that Industry 4.0 has widened the use of sensors into buildings and infrastructures. A literature review on the two main pillars of digitalisation in construction, Building Information Modelling and Internet of Things, is presented, along with a bibliographic analysis of two citations and abstracts databases focusing on the operations stage. The bibliographic research has been carried out using Web of Science and Scopus databases. The article is aimed at providing a detailed analysis of BIM–IoT integration for Facility Management (FM) process improvements. Issues, opportunities and areas where further research efforts are required are outlined. Finally, four key areas of further research development in FM management have been proposed, focusing on optimising data collection and management. Full article