Skip to Content
You are currently on the new version of our website. Access the old version .
AppliedMathAppliedMath
  • Article
  • Open Access

15 May 2026

18 Pages

Diffusion–Based Degradation Reliability Model with Imperfect Maintenance for Industrial Conveyor Belt Systems

,
and
1
Department of Mechanical Engineering, University of Port Harcourt, Choba, Port Harcourt PMB 5323, Rivers State, Nigeria
2
Department of Business Administration, University of Gothenburg, SE-405 30 Gothenburg, Sweden
3
Faculty of Engineering and Sustainable Development, University of Gävle, SE-801 76 Gävle, Sweden
4
Department of Mechanical Engineering, Veritas University Abuja, Bwari Area Council, 901101 Abuja, Nigeria

Abstract

This study develops a stochastic degradation-based reliability framework for mechanical systems subject to interacting operational stresses and imperfect maintenance. The degradation dynamics are formulated in cumulative damage space and modeled using a geometric Itô diffusion process, in which the drift term incorporates a multiplicative degradation kernel representing the combined influence of load, speed, misalignment, and environmental exposure. Imperfect maintenance is represented through a continuous attenuation functional embedded within the drift structure, allowing maintenance actions to reduce degradation growth without restoring the system to an as-good-as-new condition. Using a logarithmic transformation, the multiplicative stochastic differential equation is converted into an additive diffusion process, enabling analytical treatment via Itô’s lemma. A closed-form reliability expression is then obtained through first-passage analysis, yielding a lognormal survival function governed directly by the degradation dynamics. Numerical evaluation demonstrates physically consistent wear-out behavior and confirms the stability of the derived reliability formulation. The model further enables reliability-based maintenance optimization through preventive replacement analysis. Sensitivity results indicate that system reliability is strongly influenced by the degradation growth parameter governing the stochastic drift. The proposed framework provides a mathematically tractable connection between stochastic degradation modeling, reliability theory, and maintenance optimization. Beyond its application to conveyor belt systems, the formulation offers a general analytical structure for reliability assessment of degrading engineering systems governed by multiplicative stochastic dynamics.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.