Abstract
The main object of this work is to study the generalized B-curvature tensor in an n-dimensional Lorentzian para-Kenmotsu (briefly, ) manifold along a semi-symmetric metric connection . First, in an -manifold, we explore certain flatness conditions, namely, , , , and conditions, which all result in an -Einstein manifold. Furthermore, in an -manifold, we study the curvature conditions and = 0, which provide the scalar curvature. The generalized B-curvature tensor blends the features of different curvature tensors, allowing researchers to study conditions like semi-symmetry, pseudo-symmetry in a unified framework. Conditions like B-semi-symmetry correspond to conservation laws or stability properties in physical systems.
Keywords:
generalized B-curvature tensor; Lorentzian para-Kenmotsu manifold; Ricci tensor; curvature tensor; linear connection MSC:
53C15; 53C25
1. Introduction
In [1], Shaikh and Kundu introduced the equivalency of various geometric structures obtained by same restriction imposed on different curvature tensors. For this aim, they defined a (0, 4)-type tensor, which is linear combination of the Riemann-Christoffel curvature tensor, Ricci tensor, metric tensor, and scalar curvature, and describes various curvature tensors as its particular cases. The set of all B-tensors are denoted by .
The generalized B-curvature tensor is a refinement of classical curvature tensors that allows for deeper exploration of geometric structures. Standard tensors (like Riemann, Ricci, and Weyl) often fail to distinguish subtle geometric properties in -manifold. The generalized B-tensor introduces additional flexibility to study vanishing, semi-symmetric, and more. Existing studies on -manifold emphasize Ricci solitons or Weyl curvature conditions.
The generalized B-curvature tensor introduces new geometric invariants and conditions that were not previously studied, making it a novel tool for both classification and physical interpretation. Think of the manifold like a fabric stretched evenly in all directions (Einstein case). In the -Einstein case, one thread (the -direction) is woven tighter or looser, giving the fabric a special anisotropy. That “thread” controls how the geometry bends differently along that axis. The stated results in Section 4.1, Section 4.2 and Section 4.3 and Section 5 that “-Einstein manifold” means the manifold belongs to a special family where curvature is uniform, except in one distinguished direction. That makes the geometry easier to study and gives it potential physical interpretations.
The idea of almost para-contact manifolds was introduced by Sato [2]. According to Kaneyuki and his collaborator [3], the main variation among an almost para-contact manifold is the signature of metric. In 1989, Matsumoto [4] used a structure vector field ‘’ instead of ‘’ in an almost para contact manifold and associated a Lorentzian metric with this resulting structure, and called it a Lorentzian almost para contact manifold. The “para-Kenmotsu” condition encodes a specific interaction between the metric and a para-contact structure, giving a controlled way to study curvature and hypersurfaces in a pseudo-Riemannian setting. Afterwards, para-Kenmotsu manifolds were a great focus of geometers and brought forward the significant characteristics of such manifolds [5,6,7,8,9].
In 1924, Friedmann and Schouten proposed the concept of a semi-symmetric linear connection on differentiable manifold. A semi-symmetric metric connection preserves the metric but allows torsion, specifically tied to a 1-form. In [10], the authors studied a semi-symmetric metric connection on submanifolds of a Riemannian manifold. Certain properties of a semi-symmetric metric connection on a Riemannian manifold have been studied by De and De [11]. Recently, the authors Haseeb and Prasad investigated Kenmotsu and Lorentzian para-Sasakian manifolds with a semi-symmetric metric connection by satisfying certain curvature conditions [12,13]. The semi-symmetric metric connection on indefinite Kenmotsu manifold have been studied by the authors Kumar et al. [14]. In 2009, the authors Shukla et. al. [15] studied -Ricci symmetric Kenmotsu and illustrated some of the results through an example.
This paper is organized as follows: Section 1 covers the introduction, corresponding concepts, and brief histories. Section 2 contains preliminaries, where some fundamental results are given, which are used in subsequent sections. In Section 3, the generalized B-curvature tensor of -manifold with connection is described. In Section 4, we explore certain curvature conditions on -manifolds, namely, , , and . In Section 5, we study - semi-symmetric . In a , the curvature conditions and = 0 have been studied in Section 6 and Section 7, respectively.
2. Preliminaries
Let M be a n-dimensional Lorentzian metric manifold. If it is endowed with a structure (, where is a (1,1) tensor field, is a vector field, is a 1-form on M, and g is a Lorentz metric, fulfilling [16]
for any vector fields Y, Z on M, then it is called a Lorentzian almost para-contact manifold. In a Lorentzian almost para-contact manifold, the coming relations are valid:
here .
Definition 1.
A Lorentzian almost para-contact manifold M is called a Lorentzian para-Kenmotsu (briefly, ) manifold if [17,18]
for any vector fields Y, Z on -manifold.
- In an -manifold, we havewhere ∇ indicates the operator of covariant differentiation respecting to the Lorentzian metric g.
- Further, in an -manifold, the following relations are valid [17,18,19]:for any vector fields and X on M, where and denotes the Ricci tensor, the curvature tensor, and the Ricci operator on .
Definition 2.
The generalized B-curvature tensor on a Riemannian (or semi-Riemannian) manifold is given by [1]
where are scalars. Also, see [20,21,22].
Definition 3.
A linear connection on M is called a semi-symmetric metric connection if its torsion tensor satisfies
satisfies
for all , the torsion tesnor is skew-symmetric and expressible as the tensor product of 1-form and a vector-field. Here, is the set of differentiable vector fields on M.
The connection is called a semi-symmetric metric connection [23], if .
A relation between the connections and ∇ is given by
here, ∇ represents the Levi-Civita connection.
In an -manifold, we have
The Riemannian Christoffel curvature tensor with a connection is given by
Using relation (19) in (21), we have
Let be an orthonormal basis of the tangent space at any point of the manifold. Then, putting and taking summation over i, we have
On simplification, the above relation gives
By contracting (26) over X and Z, we have
which gives
Putting X= in (26) and using (12), we have
Also, from (26) it follows that
Definition 4.
An -manifold is called an η-Einstein manifold, if its is of the form
here, a and b are scalar functions on . If , then the manifold becomes an Einstein manifold [24].
3. Generalized B-Curvature Tensor in (LPK)n-Manifold with Semi-Symmetric Metric Connection
In this section, we deal with the generalized B-curvature tensor with semi-symmetric metric connection in the -manifold.
- For this purpose, we derive the generalized B-curvature tensor [25,26] with the connection as
4. Certain Flatness Conditions on (LPK)n-Manifold
This section deals with the study of certain flatness conditions in the framework of the -manifold.
4.1. Generalized -Flat (LPK)n-Manifold
Definition 5.
An -manifold is said to be generalized -flat if
for any on .
Let an -manifold be generalized -flat, i.e., . Then, (30) takes the form 0
Applying the inner product on (35) with W, we have
Let be an orthonormal basis of the tangent space at any point of the manifold. Then, putting and taking summation over i, we have
which after some steps calculations gives
where and . Hence, we state the following theorem:
Theorem 1.
An -manifold along with semi-symmetric metric connection satisfying condition generalized -flat, then the manifold is an η-Einstein manifold of the form (36), provided (i.e., defines a non-degenerate curvature structure).
The -Einstein condition essentially decomposes the Ricci tensor into two geometrically meaningful components: one proportional to the metric (isotropic curvature) and another proportional to the tensor product of the contact 1-form (anisotropic curvature) with itself.
4.2. Generalized --Flat -Manifold
In this subsection, we study generalized --flat -manifold, i.e., . Thus, it follows from (30) that
Taking the inner product of (37) with W and using (2), (10) and (12), we have
Theorem 2.
An -manifold along with semi-symmetric connection satisfying condtion generelized ζ--flat, then manifold is an η-Einstein manifold of the form (39), provided .
Next, from (30), we have
which can be written as
where
If the scalars are related by , then (40) reduces to .
Thus, we have the following corollary:
Corollary 1.
An -manifold is generalized ζ-B-flat with respect to the semi-symmetric connection if and only if the manifold is also generelized ζ-B-flat with respect to the Levi-Civita connection, provided .
4.3. -Generalized -Flat -Manifold
In this subsection, we study -generalized -flat -manifold, i.e., . Thus, in account of (30), we have
In view of (1) and (14), the above expression takes the form
Let be an orthonormal basis of the tangent space at any point of the manifold. Then, putting and taking summation over i, we have
This gives
which is of the form
where
and
Thus, we state the following result:
Theorem 3.
An -manifold along with a semi-symmetric metric connection is φ-generalized -flat, then the manifold is an η-Einstein manifold of the form (41), provided .
Definition 6.
An (LP-K)n-manifold is called φ-Ricci-symmetric with a semi-symmetric metric connection if
for any on (LP-K)n-manifold [27]. In case, are orthogonal to ζ, then (LP-K)n is named locally φ-Ricci-symmetric.
- From (41), it follows that
Corollary 2.
A φ-generalized -flat -manifold of a constant scalar curvature with a semi-symmetric metric connection is locally φ-Ricci-symmetric.
5. φ-Generalized -Semi-Symmetric (LPK)n-Manifold
Definition 7.
An -manifold is said to be φ-generalized -semi-symmetric if
for any on M. See [28].
In this section, we study a -generalized -semi-symmetric (LPK)n-manifold, i.e., . This implies that
Making use of (30) in (51), we have
Putting in (52) and making use of (2), (3), (9), and (12), we have
Interchanging X by in (53) and using (1), (3), we obtain
Thus, we have the following result:
Theorem 4.
An -manifold along with a semi-symmetric metric connection satisfying condition φ-generalized -semi-symmetric, then the manifold is an η-Einstein manifold of the form (54).
6. (LPK)n-Manifold Satisfying the Curvature Condition
In this section, we study the -manifold satisfying (. This implies
Put in (55), we have
which in view of (32) turns to
Performing the inner product of (56) with , we find
Contracting (57) over Y and X, we obtain
The relation (58) is quadratic in r. Let , and . After applying the well-known formula , it yields the two values of a scalar curvature. Thus, we have the following result:
Theorem 5.
An -manifold along with a semi-symmetric metric connection satisfying .Q = 0 gives the scalar curvature in the quadratic form described in (58).
7. (LPK)n-Manifold Satisfying the Curvature Condition
In this section, we study the -manifold satisfying (. This implies
Put in (59), we have
In view of (32), (60) takes the form
which by taking the inner product with becomes
Contracting (61) over Y and X, we obtain
We arrange the above relation as follows:
The relation (62) is quadratic in r. Let , , and . After applying the well-known formula , it yields the two values of the scalar curvature. Thus, we have the following result:
Theorem 6.
An -manifold along with semi-symmetric metric connection satisfying = 0 gives the scalar curvature in quadratic form as described in Equation (62).
8. Example
We consider the 3-dimensional manifold , where () are the standard coordinates in . Let , , and be the vector fields on M defined by
which are linearly independent at each point p of M. Let g be the Lorentzian metric defined by
Let be the 1-form defined by = = for all , and let be the (1, 1)-tensor field defined by
By applying linearity of and g, we have
for all . Thus, for , the structure () defines a Lorentzian almost para-contact metric structure on M. Then, we have
By using the well-known Koszul’s formula, we find
Now, let
for all . Also, one can easily verify that
Therefore, the manifold is a Lorentzian para-Kenmotsu manifold.
- From the above results, we can easily obtain the non-vanishing components of the curvature tensor as follows:
- The relation between the semi-symmetric metric connection and the Levi-Civita connection ∇ has been given by:
- From the above results, we obtain the non-vanishing components of the curvature tensor as:
Author Contributions
R.P.: Conceptualization, investigation, methodology, writing—review & editing; N.M.A.-A.: Conceptualization, investigation, methodology, writing—original draft; A.H.: Conceptualization, investigation, methodology, writing—original draft; S.S.: Conceptualization, investigation, methodology, writing—review & editing. All authors have read and agreed to the published version of the manuscript.
Funding
This research received no external funding.
Data Availability Statement
The original contributions presented in this study are included in the article. Further inquiries can be directed to the corresponding author.
Acknowledgments
The authors are thankful to the reviewers for their careful reading of the manuscript and thoughtful comments to improve the paper.
Conflicts of Interest
The authors declare no conflicts of interest.
References
- Shaikh, A.A.; Kundu, H. On equivalency of various geometric structures. J. Geom. 2013, 105, 139–165. [Google Scholar] [CrossRef] [Scilit]
- Sato, I. On a structure similar to the almost contact structure. Tensor (New Ser.) 1976, 30, 219–224. [Google Scholar]
- Kaneyuki, S.; Williams, F. Almost paracontact and parahodge structures on manifolds. Nagoya Math. J. 1985, 99, 173–187. [Google Scholar] [CrossRef] [Scilit]
- Matsumoto, K. On Lorentzian paracontact manifolds. Bull. Yamagata Univ. Natural Sci. 1989, 12, 151–156. [Google Scholar]
- Blaga, A.M. Conformal and paracontactly geodesic transformations of almost paracontact metric structures. Facta Univ. Scr. Math. Inform. 2020, 35, 121–130. [Google Scholar] [CrossRef] [Scilit]
- Blaga, A.M.; Crasmareanu, M. Statistical structures in almost paracontact geometry. Bull. Iranian Math. Soc. 2018, 44, 1407–1413. [Google Scholar] [CrossRef] [Scilit]
- Calvaruso, G. Homogeneous paracontact metric three-manifolds. Ill. J. Math. 2011, 55, 696–718. [Google Scholar] [CrossRef] [Scilit]
- Chaturvedi, B.B.; Gupta, B.K. C-Bochner curvature tensor on almost C(λ) manifolds. Palest. J. Math. 2019, 8, 258–265. [Google Scholar]
- Dirik, S.; Atceken, M.; Yildirim, Z. Anti invariant submanifolds of a normal paracontact metric manifolds. Gulf J. Math. 2021, 10, 38–49. [Google Scholar] [CrossRef] [Scilit]
- Amur, K.S.; Pujar, S.S. On submanifolds of a Riemannian manifold admitting semi-symmetric metric connection. Tensor (New Ser.) 1978, 32, 35–38. [Google Scholar]
- De, U.C.; De, B.K. Some properties of a semi-symmetric metric connection on a Riemannian manifold. Istanb. Univ. Fen Fak. Mat. Der. 1995, 54, 111–117. [Google Scholar]
- Haseeb, A.; Prasad, R. Certain curvature conditions in Kenmotsu manifolds with respect to semi-symmetric metric connection. Commun. Korean Math. Soc. 2017, 32, 1033–1045. [Google Scholar] [CrossRef]
- Haseeb, A.; Prasad, R. Certain curvature conditions in Lorentzian para-Sasakian manifolds with respect to semi-symmetric metric connection. Int. J. Maps Math. 2020, 3, 85–99. Available online: https://simadp.com/journalmim/article/view/61 (accessed on 19 March 2026).
- Kumar, K.H.A.; Kumar, K.T.P.; Venkatesha; Vishnuvardhana, S.V. C-Bochner φ-symmetric (ϵ)-Kenmotsu manifold admitting semi-symmetric metric connection. Contact Geom. Slant Submanifolds 2022, 72, 111–119. [Google Scholar]
- Shukla, S.S.; Shukla, M.K. On φ-Ricci symmetric Kenmotsu manifolds. Novi Sad J. Math. 2009, 39, 89–95. [Google Scholar]
- O’Neill, B. Semi-Riemann Geometry with Application to Relativity, Pure and Applied Mathematics; Academics Press: New York, NY, USA, 1983; Volume 103. [Google Scholar]
- Haseeb, A.; Prasad, R. Certain results on Lorentzian para-Kenmotsu manifolds. Bol. Soc. Paran Mat. 2021, 39, 201–220. [Google Scholar] [CrossRef] [Scilit]
- Haseeb, A.; Prasad, R. Some results on Lorentzian para-Kenmotsu manifolds. Bull. Transilv. Univ. Bras. 2020, 13, 185–198. [Google Scholar] [CrossRef] [Scilit]
- Prasad, R.; Verma, A.; Yadav, V.S.; Haseeb, A.; Bilal, M. LP-Kenmotsu manifolds admitting Bach almost solitons. Univers. J. Math. Appl. 2024, 7, 102–110. [Google Scholar] [CrossRef] [Scilit]
- Atceken, M.; Yildirim, Z.; Dirik, S. Generalized B-curvature tensor of a normal paracontact metric manifold. Hagia Sophia J. Geom. 2019, 1, 1–7. [Google Scholar]
- Bagewadi, C.S.; Ingalahalli, G.; Kumar, K.T.P. On irrotational C-Bochner curvature tensor in K-contact and Kenmotsu manifolds. Acta Univ. Apulensis 2012, 32, 221–232. [Google Scholar]
- Kumar, R.T.N.; Murthy, B.P.; Somashekhara, P.; Venkatesha, V. Certain study of generalized B curvature tensor within the framework of Kenmotsu manifold. Commun. Korean Math. Soc. 2023, 38, 893–900. [Google Scholar] [CrossRef]
- Yano, K. On semi-symmetric metric connection. Rev. Roum. Math. Pures Appl. 1970, 15, 1579–1586. [Google Scholar]
- Blair, D.E. Contact Manifolds in Riemannian Geometry; Lecture Notes in Mathematics; Springer: Berlin/Heidelberg, Germany, 1976; Volume 509. [Google Scholar]
- Shanmukha, B.; Venkatesha. LP-Sasakian manifold admitting C-Bochner curvature tensor. Palest. J. Math. 2020, 9, 396–401. [Google Scholar]
- Singh, G.P.; Prajapati, P.; Mishra, A.K.; Rajan. Generalized B-curvature tensor within the framework of Lorentzian β-Kenmotsu manifold. Int. J. Geom. Methods Mod. Phys. 2024, 21, 2450125. [Google Scholar] [CrossRef] [Scilit]
- Prasad, R.; Haseeb, A.; Verma, A.; Yadav, V.S. A study of φ-Ricci symmetric LP-Kenmotsu manifolds. Int. J. Maps Math. 2024, 7, 33–44. [Google Scholar]
- De, U.C.; Majhi, P. φ-semi symmetric generalized Sasakian space forms. Arab J. Math. Sci. 2015, 21, 170–178. [Google Scholar]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2026 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.