Abstract
The electromechanical impedance (EMI) technique has been widely used as a non-destructive method for identifying damage in structures and various types of materials. Studies using this technique with low-cost piezoelectric transducers have shown good results in detecting burn marks in surface grinding processes and cracks in metal structures. Therefore, this research investigates the feasibility of the EMI method using low-cost piezoelectric diaphragms for the non-contact characterization of liquids, varying properties by adding contaminant liquids to the system’s reference fluid. The feasibility analysis is performed by examining the transducer’s electrical impedance curves and the statistical indices of root mean square deviation (RMSD) and the correlation coefficient deviation metric (CCDM) of the respective curves, using different liquids such as mineralized water with various solutes, glycerin, distilled water, and motor oil. The results indicate a high sensitivity of the piezoelectric diaphragm to small variations in the concentration of mixtures with water within certain frequency ranges, including greater sensitivity of the 27 mm diaphragm attached to the aluminum circular container. Furthermore, a shift in the impedance signatures is observed in liquids with higher viscosity and larger volume, demonstrating that the EMI technique using low-cost piezoelectric diaphragms has a high potential for non-invasive and cost-effective sensing.