Abstract
The durability of reinforced concrete structures is significantly affected by environmental exposure, chloride ingress, carbonation, and limitations of conventional repair methods. This paper presents three case studies evaluating the application of a surface-applied migratory corrosion inhibitor treatment for improving the durability and corrosion resistance of reinforced concrete structures. The first case study presents the long-term performance of treated reinforced concrete structures located in a coastal environment in Okinawa, Japan. Ten years of monitoring showed a reduction in corrosion rates of 69% for bridge piers and 58% for beams compared with pre-treatment values, while water permeability was reduced by 94% and 89%, respectively. The second case study describes the rehabilitation of a bridge in Győr, Hungary, where the applied treatment enabled a less invasive repair approach under traffic constraints. The intervention reduced the required renovation time by approximately 80%, decreased concrete-related repair costs by 73%, and reduced total project costs by 59%. The treatment improved tensile bond strength and reduced water-soluble chloride ion content, contributing to the enhanced durability performance of the concrete. The third case study presents accelerated corrosion testing performed on reinforced concrete specimens for NASA Kennedy Space Center, where electrochemical measurements confirmed reduced corrosion activity after treatment under chloride exposure conditions. The presented case studies highlight this treatment’s potential application for both existing infrastructure rehabilitation and long-term corrosion protection of critical reinforced concrete structures.