Skip to Content
  • Proceeding Paper
  • Open Access

13 November 2026

The Effect of Weaving Pattern on the Material Characteristics of the Textile Composite Layer †

Department of Applied Mechanics, AUDI Hungaria Faculty of Engineering, Széchenyi István University, Egyetem tér 1, H-9026 Győr, Hungary
†
Presented at the Sustainable Mobility and Transportation Symposium 2026, Győr, Hungary, 8 October 2026.
Eng. Proc.2026, 157(1), 70;https://doi.org/10.3390/engproc2026157070 
(registering DOI)
This article belongs to the Proceedings of The Sustainable Mobility and Transportation Symposium 2026

Abstract

The article demonstrates how textile weave patterns influence the orthotropic material properties of a textile composite layer. The examined textiles have two mutually perpendicular fiber directions. The density of the longitudinal and transverse fiber bundles is the same in the layer models. In the fabric, the warp and weft fiber bundles alternately pass over and under each other. This study investigates how the material properties of a textile composite layer change when the waviness of the fiber bundles varies over a given length. There are different weaving patterns in the finite element layer models. The fiber bundle passes over or under several consecutive perpendicular fiber bundles. The volume fraction of the textile in the composite layer is only slightly affected by the waviness of the fiber bundles. As a result of tensile loading, the waviness of the rovings decreases in the loading direction and increases in the perpendicular direction.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.