1. Introduction
The AIAS (Italian Scientific Society of Mechanical Engineering Design) was founded in 1971, originally as an association focused on stress analysis, bringing together researchers from academia, research centers and industry to discuss, share and develop scientific knowledge on the subject. Starting with a focus on experimental techniques, the society progressively extended its scope to numerical methods and computational tools for mechanical engineering design. In 2015, it adopted its current name while retaining the historical acronym.
Today, AIAS is an institutional partner that supports academia in the field of mechanical engineering design. Its annual conference remains the main venue where researchers, doctoral students and professionals can present their work, discuss new ideas and build collaborations, and where they can meet directly with instrument and software developers active in the field.
The 54th AIAS Conference was held in Florence, Italy, from 3 to 6 September 2025, hosted by the University of Florence at the Centro Didattico Morgagni. The conference brought together more than 340 participants and 229 oral presentations distributed across parallel thematic sessions; all contributions were accommodated within the regular thematic program. The scientific program was complemented by four plenary lectures that, alongside the traditional technical keynotes, opened the conference to a broader perspective: Vera Gheno (University of Florence) on the social and practical dimensions of language, Paolo Noccioni (President, Nuovo Pignone Industrial & Energy Technology, Baker Hughes) on the industrial outlook, and Gian Carlo Blangiardo (former President of ISTAT) on demographic trends. The conference also included a tribute lecture in memory of Prof. Franco Furgiuele, former AIAS President, delivered by Huseyin Sehitoglu (University of Illinois at Urbana-Champaign) on the strength of high entropy alloys—a moment that the AIAS community felt was important to mark publicly. Eleven companies exhibited alongside the technical sessions, confirming the conference’s role as a meeting point between academic research and industrial practice.
Among the contributions presented at the conference, 49 papers were selected for publication in this volume following a peer review process. This was made possible through the active participation of all AIAS members, the efforts of the AIAS Scientific Committee panel, and the contributions of the conference reviewers, for which we are very grateful.
Scope and Topics
- Experimental mechanics;
- Mechanics of materials;
- Numerical models and methods for structural analysis;
- Design, design for X;
- Reliability and safety of mechanical systems;
- Vehicles;
- Methods for integrated product design;
- Biomechanics;
- Design for additive manufacturing;
- Joining techniques for structural components;
- Circular design;
- Mechanical behavior under extreme conditions.
2. Conference Committees
2.1. Organizing Committees
- Prof. Renzo Capitani, University of Florence—President;
- Prof. Marco Pierini, University of Florence;
- Niccolò Baldanzini, University of Florence;
- Massimo Delogu, University of Florence;
- Dr. Patrizia Cecchi, University of Florence;
- Doriano Giannelli, University of Florence;
- Dr. Niccolò Lapi, University of Florence.
2.2. Scientific Committees
- Prof. Umberto Galietti, Scientific Coordinator, Politecnico di Bari;
- Prof. Gabriele Arcidiacono, Scientific Coordinator, Università degli Studi Guglielmo Marconi;
- Prof. Luigi Bruno, Università della Calabria;
- Prof. Davide Castagnetti, Università di Modena e Reggio Emilia;
- Prof. Cristiana Delprete, Politecnico di Torino;
- Prof. Mario Guagliano, Politecnico di Milano;
- Prof. Vigilio Fontanari, Università degli Studi di Trento;
- Prof. Nicola Bonora, Università di Cassino e del Lazio Meridionale.
3. Plenary/Invited Speakers
- Vera Gheno, University of Florence—“Linguaggio ampio tra valore simbolico e conseguenze pratiche”;
- Paolo Noccioni, President, Nuovo Pignone Industrial & Energy Technology, Baker Hughes;
- Gian Carlo Blangiardo, former President of ISTAT;
- Huseyin Sehitoglu, University of Illinois at Urbana-Champaign—“A Tribute to Prof. Franco Furgiuele: Strength of High Entropy Alloys”.
4. Exhibitors
- ○
- STEP Lab;
- ○
- Instrumentation Devices;
- ○
- Next Technology Tecnotessile;
- ○
- SINT Technology;
- ○
- RUMUL;
- ○
- Form+Test;
- ○
- Luchsinger;
- ○
- Meccanica 42;
- ○
- AlmaTec + Hexagon;
- ○
- Teledyne FLIR Solutions.
Conflicts of Interest
The authors declare no conflict of interest.
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2026 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license.