Skip to Content
You are currently on the new version of our website. Access the old version .
HydrogenHydrogen
  • Review
  • Open Access

23 January 2026

61 Pages

Technological Trends in Ammonia-to-Hydrogen Production: Insights from a Global Patent Review

,
,
and
Faculty of Integrated Technologies, Universiti Brunei Darussalam, Jalan Tungku Link, Gadong BE1410, Brunei
*
Authors to whom correspondence should be addressed.

Abstract

With rising demand for clean energy and uncertainty surrounding large-scale renewable deployment, ammonia has emerged as a viable carrier for hydrogen storage and transportation. This study conducts a global patent-based analysis of ammonia-to-hydrogen production technologies to determine technological maturity, dominant design pathways, and emerging innovation trends. A statistically robust retrieval, screening, and classification process, based on the PRISMA guidelines, was employed to screen, sort, and analyze 708 relevant patent families systematically. Patent families were categorized according to synthesis processes, catalyst types, and technological fields. The findings indicate that electrochemical, plasma-based, photocatalytic, and hybrid systems are being increasingly investigated as alternatives to low-temperature processes. At the same time, thermal catalytic cracking remains the most established and widely used method. Significant advances in reactor engineering, system integration, and catalyst design have been observed, especially in Asia. While national hydrogen initiatives, such as those in Brunei, highlight the policy importance of ammonia-based hydrogen systems, the findings primarily provide a global overview of technological maturity and innovation trajectories, thereby facilitating long-term transitions to cleaner hydrogen pathways.

1. Introduction

Rapid population growth is driving economic expansion and expanding the scope of modern civilization. The requirement for energy is increasing as a result. Satisfying this requirement is among the world’s top priorities at the moment because of its long-term effects on the economy and the environment [1,2]. The environmental issues posed by energy sources based on fossil fuels have led to the introduction of renewable energy sources as a solution [3]. The world’s renewable energy output reached its highest point in 2023, with solar photovoltaic (PV) being the primary source. However, since the Group of 20 (G20) countries heavily rely on fossil fuels, the world remains a considerable distance from achieving the 1.5 °C climate goal, despite the promises made at the 28th UN Climate Change Conference (COP28) and the G20/G7 initiatives. To meet the 1.5 °C Scenario, the world’s renewable energy capacity must exceed 11,000 GW by 2030, necessitating significant investments and rapid upgrades. The International Renewable Energy Agency (IRENA) predicts that by 2050, 91% of electricity will be generated from renewable energy sources (RE) [4]. This means that businesses and transportation will need to switch to RE-generated electricity. However, the transition must also consider the historical significance of fossil fuels in industrial development and energy consumption, anticipated to increase due to population and Gross Domestic Product (GDP) growth by 2040. Countries will need to plan their transitions differently depending on their own situations.
Hydrogen has become one of the most promising clean energy carriers. It could significantly reduce carbon dioxide (CO2) emissions and transform the natural gas industry [1]. However, it is still hard to store and move safely. Ammonia (NH3) has gained popularity as a hydrogen carrier because it can remain in a liquid form at room temperature under a moderate pressure of approximately 10 bar, similar to propane. It also benefits from a well-established global infrastructure, such as pipelines, maritime transport, and pressurized storage. Even so, producing ammonia and then converting it back to hydrogen both require significant energy. Additionally, ammonia is toxic and corrosive, making it even more challenging to handle. Still, rapid technological advances and strict safety rules are making operations safer, more efficient, and less expensive. Because of this, ammonia is becoming more and more popular as a way to store and move green hydrogen, helping the world move toward a cleaner and more sustainable energy future [1].
As countries explore cleaner RE pathways, national contexts and situations can vary significantly, with Brunei Darussalam representing a case where current energy circumstances shape the transition trajectory. For decades, the country’s economy was heavily reliant on its abundant fossil fuel deposits; however, its reliance on fossil fuels for energy generation makes it a significant source of greenhouse gas emissions and, by extension, a contributor to climate change. More than 60% of the country’s gross domestic product comes from its substantial oil and natural gas reserves, with Liquefied Natural Gas (LNG), crude oil, and methanol forming the main exports [5]. Natural gas (79%) and oil (16.4%) make up most of the energy mix, with only a small amount coming from renewable sources (0.003%) [6]. Brunei plans to reduce emissions by 20% by 2030, achieve net-zero emissions by 2050, reduce energy intensity by 45% by 2035, and increase renewable energy capacity by 200 MW by 2025. For a country that has relied heavily on oil and gas [7], meeting these goals is not easy, despite the country’s involvement in the BIMP-EAGA Renewable Energy Certificate (REC) to assist the RE market across borders [8]. Renewable energy sources accounted for just 0.01% of electricity in 2021, and by 2025, they were expected to produce 200 MW [9]. Despite the government’s effort in developing renewable energy rules and regulations to encourage investment in clean energy technology [6], the country’s RE potential is constrained by limited biogas, geothermal, hydroelectric, and biomass resources, leaving solar and wind power, both Variable Renewable Energy (VRE) sources, as the primary options [10]. Solar is the most promising resource, but its high upfront costs, large land requirements, low capacity factors, and intermittency indicate that solar alone cannot meet long-term baseload needs [11]. In this context, hydrogen storage offers a significant role, providing a means to stabilize intermittent solar output, support decentralized energy systems, and enhance reliability [12].
These highlight the importance of identifying reliable, efficient, and scalable pathways for hydrogen production that can support energy transition efforts. Ammonia decomposition emerges as a promising route due to its relatively mature transport infrastructure and potential to serve as a hydrogen carrier. Therefore, this paper aims to review and analyze patents related to ammonia decomposition technologies. Studying these developments provides globally relevant insights, while also offering perspectives for countries considering hydrogen production from ammonia as part of their energy transitions.

2. Background

2.1. Hydrogen as a Clean Energy Carrier

Hydrogen is widely regarded as a green energy carrier due to a combination of favorable physical, chemical, and environmental characteristics.
The high specific energy per mass of hydrogen makes it a popular, environmentally friendly, and safe choice for energy storage [3]. With the shift toward renewable energy sources, their importance has grown in recent years. It outperforms fossil fuels and is more environmentally friendly. It is also more versatile. Renewable energy sources, such as solar, biomass, and wind, can be used to produce hydrogen, which is not a renewable resource in itself. Because of this, it is a promising energy source for a post-carbon world [13,14,15]. The fact that hydrogen can both store and transmit energy makes it an ideal energy carrier. It produces water as the sole byproduct of combustion when exposed to oxygen, and its gravimetric energy density (120 MJ kg−1) is about three times more than that of kerosene (42.8 MJ kg−1) and gasoline (44 MJ kg−1), the fuels used to power airplanes and cars, respectively.
However, hydrogen can also pose its own issues. Due to its low volumetric energy density and status as the lightest gas, it is not found in pure form in nature. This necessitates the use of substances containing hydrogen [2]. Hydrogen is not particularly effective for long-distance transport and has high storage costs, making its widespread use difficult. The extremely low volumetric density of hydrogen means that compressed gas cylinders are only suitable for short-distance deliveries. Long-distance transportation is more challenging. The need for safer, more efficient hydrogen carriers with greater on-site generation capacity has prompted this line of inquiry. Currently, high-density hydrogen carriers can be produced from ammonia, liquid organic hydrogen carriers (LOHCs), or liquid hydrogen. However, the volume loss that occurs when liquid hydrogen is subjected to extremely low temperatures renders it less practical.
Additionally, due to their lower total cost, ease of usage, and reduced hydrogen loss, ammonia and LOHCs are superior for long-distance transport [12,16]. Among these options, ammonia-to-hydrogen conversion has gained particular interest because it directly bridges hydrogen production, storage, and utilization, making it especially suitable for large-scale and long-distance energy transport. In contrast to previous studies that primarily focus on material performance or reactor design, this work adopts a global patent landscape perspective to analyze technological pathways and innovation trends in ammonia-to-hydrogen systems systematically.

2.2. Ammonia as a Hydrogen Carrier

Ammonia (NH3) has a high hydrogen capacity of 17.6 wt%. It is a promising chemical hydrogen carrier and a more practical alternative to other hydrogen carriers because it is cheap and easy to liquefy (it can be liquefied at low pressure, 8.6 bar at 293 K). There is already a lot of technology for transporting it. Compared with alternative carriers such as liquid organic hydrogen carriers (LOHCs), ammonia does not require hydrogenation-dehydrogenation cycles and produces hydrogen without carbon-containing by-products. The reaction that breaks down ammonia takes in heat:
N H 3 ( g ) → 1 2 N 2 ( g ) + 3 2 H 2 ( g ) ∆ H = + 46 k J m o l
Additionally, because it does not contain carbon, it not only helps lower greenhouse gas emissions but also prevents the release of hazardous chemicals such as sulfur dioxide and carbon monoxide [16,17]. The Haber-Bosch process produces a significant amount of ammonia, which is a helpful way to store hydrogen. Using it does not make CO2, and its energy density is higher than that of both compressed and liquefied hydrogen. When this is used to move hydrogen gas over long distances at low pressures, its naturally low volumetric density is no longer a problem. Because ammonia is poisonous, it is not easy to handle or use. All safety and handling regulations must be strictly adhered to. There can be trace quantities of ammonia in the hydrogen even after hydrolysis. Even so, ammonia does have some redeeming qualities. There is a vast supply of hydrogen in this system, and the global shipping network is quite efficient. This makes it perfect for both production and transportation [12]. Eventually, modern technology has made ammonia a viable, environmentally friendly, and cost-effective means of transporting hydrogen. The storage and utilization of renewable energy sources could be significantly enhanced by this [16].

2.3. Hydrogen Production from Ammonia

2.3.1. Overview of Ammonia Decomposition Mechanisms

The process of ammonia breakdown is rapidly gaining importance along the value chain, from renewable energy to hydrogen. Even if there is sufficient capacity worldwide to produce ammonia and hydrogen, the challenge is that existing decomposition systems cannot produce high-purity hydrogen at the required scale [17]. It is not necessary to use a catalyst for ammonia to decompose at high temperatures. Dates as far back as 1904 indicate studies on this response. There have been several attempts throughout the years to generate the required activation energy. Examples of these sources of energy include electric current, microwaves, plasma, solar radiation, and systems that integrate the exothermic reactions of ammonia cracking and propane or butane combustion [18]. There are several typical methods for producing hydrogen from ammonia, including thermal catalytic (thermocatalytic), electrocatalytic, photocatalytic, and plasma-catalytic processes [16,17].
One notable and effective method for producing hydrogen from ammonia is through thermal catalysis. Without a catalyst, ammonia decomposes at very high temperatures, typically around 1300 K. As a result, it is not very helpful. At temperatures above 873 K, thermocatalytic breakdown occurs regardless of the presence of catalysts. The reason is the high energy required to split ammonia into nitrogen and hydrogen, due to the strong N-H bonds. To address these issues, catalysts have been developed to accelerate ammonia decomposition and enhance hydrogen production. When ammonia molecules bind to a catalyst’s active sites, they decompose into hydrogen and nitrogen. A catalytic reaction describes this phenomenon. The last step in this process is desorption [17]. While theoretical complete ammonia conversion occurs at 649.85 °C, doing so at higher temperatures results in higher energy costs and shorter equipment lifetimes. Producing ammonia is less challenging than producing hydrogen at high temperatures due to thermodynamic equilibrium. Extreme caution is required to keep the reaction temperature below 500 °C. Hydrogen production is expected to rise, costs will decrease, and overall energy consumption will decrease. Catalysts typically experience a decrease in temperature-induced hydrogen production. Future research should aim to enhance the catalyst’s stability, selectivity, and activity at lower temperatures, thereby prolonging its lifespan. Large corporations will find this technology safer and more affordable, with catalysts that produce more hydrogen at lower temperatures [16].
Another viable on-board option is the electrochemical process, which, at relatively low temperatures, can decompose ammonia into nitrogen (N2) and hydrogen. In contrast to water’s electrolysis voltage of 1.23 V, the theoretical electrolysis voltage of liquid ammonia is substantially lower at 0.077 V. The electrical splitting of ammonia produces amide ions and hydrogen molecules at the cathode. Nitrogen molecules are produced by oxidizing amide ions at the anode. The electrolysis reactor must be constructed as an exceptionally closed electrolytic cell, in accordance with stringent experimental parameters, to prevent the oxidation and hydration of metal amides. The current efficiency drops to 85% at a high cell voltage of 2 V due to the inevitable reverse reaction in liquid ammonia. The ideal conditions for ammonia electrolysis need a very low cell voltage and a very high current [17].
Electrocatalytic ammonia breakdown works best in water-based electrolytes, but pH does affect the reaction. Acidic liquids slow down the reaction and break the electrodes, making the device useless. For this reason, alkaline electrolytes are gaining ground. They can help repair acidic system issues and are more stable. Anodes convert ammonia into nitrogen, and cathodes do the same with water, producing hydrogen gas. Sometimes, the anode oxidizes ammonia while producing oxygen. The method is pickier and takes longer. Using electrolysis on ammonia is relatively inexpensive, but the reactions are time-consuming and not always selective. Researchers are investigating the transition of metal catalysts and custom nanostructures as potential alternatives to traditional electrode materials. The reason is that no electrocatalyst has been proven effective enough for commercial use, despite extensive testing [17].
The photocatalytic process is also a viable alternative because it can convert NH3 into N2 and H2 at room temperature using catalysts that can be reused and light that can be controlled. Photocatalysis using sunlight breaks down ammonia at high pH. When light with energy greater than the photocatalyst’s band gap is absorbed, it generates electrons and holes. Electrons in the conduction band can change oxygen (O2) into hydroxyl radicals, and the empty spaces are strong oxidizers. In photocatalytic ammonia decomposition, the electrons and holes on a semiconductor must change the adsorbed species on the catalyst surface. This process generates unnecessary free radicals and other byproducts. However, only a few photocatalysts have been shown to break down aqueous ammonia solutions [17].
P h o t o c a t a l y s t + h v   → e − + h +
2 N H 3 + 6 h + → N 2 + 6 H +
2 H + + 2 e − → H 2

2.3.2. Role of Catalyst in Ammonia Decomposition

Breaking down ammonia requires catalysts. Some of the most common types are nitrides, carbides, bimetallic complexes, noble metals, and non-noble metals. Ru-based catalysts have the strongest Ru-N bond energy, which makes it easier to add and take away N* from them. This is why they fall apart so easily when it is cold. On the other hand, many people cannot afford to use them because they are so expensive. By mixing Ruthenium (Ru) with inexpensive transition metals such as nickel (Ni) or iron (Fe), scientists have created bimetallic catalysts. These systems need to be able to control better how they are built and what they are made of. This will save money without hurting performance. Nickel and other non-noble metals are inexpensive catalysts that could be very useful. After Ru, they are the second most active. Adding metal to catalyst supports and optimizing their interaction with the metal can enhance the performance of these supports. Different catalytic systems can break down ammonia in different ways. Ru is used in thermos-catalytic, Fe is used in electrocatalytic and photocatalytic pathways, and Fe is used in plasma-catalytic procedures. Catalysts also support the entire process, making it more efficient, stable, and sustainable. Different catalysts break down ammonia (NH3) in different ways, so it is important to know how to make hydrogen production more efficient [16,17].
Furthermore, metal dispersion, particle size, and interactions with catalyst supports are among the structural characteristics associated with catalyst performance in the reviewed patents. Metal catalysts, whether supported or nanostructured, are frequently used in high-activity systems because they increase the number of active sites available and improve ammonia activation. Bimetallic and promoted catalysts are commonly used to reduce noble metal content while increasing stability and activity. These catalysts produce synergistic electrical or structural effects [19,20]. As a result of these tendencies, catalyst design in ammonia-to-hydrogen technologies is influenced by a broad structure-performance relationship.

2.4. Patent Landscape on Ammonia Decomposition to Hydrogen

Given the range of decomposition methods and catalysts related to hydrogen production from ammonia, it is important to understand how these technological developments translate into practical innovations. Patents reveal industry-driven technological advances, often before they are published in academic journals, making them an essential tool for tracking technological evolution. Most of the time, academic journals publish only the results of research, whereas patents cover all the business, technical, and practical aspects of the technology that converts ammonia into hydrogen. This includes catalyst preparation, reactor designs, system integration, and approaches to reduce energy consumption. By examining patents, one can also learn about the current state of various technologies, identify leading countries and companies, and observe common engineering approaches [21]. This is particularly valuable in the field of hydrogen production from ammonia decomposition, where many innovations originate from industrial sectors that do not always disseminate their work through academic literature. Understanding patent trends, therefore, can also help us understand where technology is going and provide a strategic starting point for potential pathways towards the energy transition [22].
According to patent statistics, China is likely responsible for most of the increase in patent filings since 2018, and this trend may also extend to the current field of interest. Studying patents may point to catalyst innovation, low-temperature decomposition techniques, and hybrid cracking systems. It also highlights emerging technologies, such as plasma-assisted, electrochemical, and advanced catalyst-supported methods. These help identify technologies approaching practical deployment and those still in infancy. As global interest in hydrogen expands, patents can provide valuable insights into future opportunities in ammonia decomposition technologies [22,23].

3. Methodology

3.1. Patent Review Process

This study used a systematic, evidence-based approach to identify, confirm, and retain patents relevant to the technology being studied [24]. There are three parts to the method: (i) making a systematic search, (ii) checking the statistical recall, and (iii) improving the dataset with a custom Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) workflow. All of this supported the assumption that the reorganized database was complete, non-redundant, and methodologically suitable for further analyses [25].

3.1.1. Search Construction

To ensure that this project receives the right patents, a structured search query was conducted. The following three groups of keywords were used:
  • Process-related language, which means that all of the patents discussed the steps needed to produce hydrogen from ammonia.
  • Terms based on applications that limit the results to treatments available in the proper context of administration.
  • IPC codes helped narrow searches further by limiting them to specific technical areas.
These keyword groups were combined using simple Boolean logic to ensure that each patent met all required criteria.
Q = (Process) AND (Application) AND (IPC codes)
This multi-layered structure increased the specificity and relevance of the initial dataset.

3.1.2. Recall Validation

Patent databases are vast and contain a wide range of information; therefore, any search method needs to be regularly checked to ensure that it does not overlook any important patents. To address this issue, a statistical recall-validation method was employed.
  • Development and hold-out samples
An initial development list of (m = 20) related patents was assembled based on literature searches and expert opinion. Searching construction was developed and refined in this manner, such that the search strings capture all m patents.
After refinement, the query was fixed (“frozen”), and a separate set of hold-out validation list of (n = 20) relevant patents was then randomly selected. This hold-out sample, denoted n, is used to check the completeness of the search. These divisions ensured the statistical independence of query design and validation. The combined validation corpus is therefore defined as
z = m + n
where z = 40 reflects the total number of patents analyzed throughout the development and validation phases. The z-value is presented for transparency, but it is not used to calculate the statistical sample size for the recall estimate.
2.
Calculation of recall
Recall was defined as
Recall = ∣ Q ∩ R ∣ ∣ R ∣
where R is the validation set of relevant patents, and Q is the set of patents retrieved by the final query.
3.
Confidence estimation (Clopper–Pearson Interval)
The Clopper–Pearson exact interval was applied to estimate the confidence interval for true recall based on the number (r) of correctly retrieved patents out of a total number. Let r denote the number of correctly retrieved patents out of a validation set of size n, with the resulting confidence interval providing a statistical estimate of the lower bound for true recall. The binomial computation was carried out solely on the hold-out validation sample (n = 20).
A one-sided Clopper–Pearson method was used to estimate the 95% lower confidence bound for recall (α = 0.05) [25]. For this project, the last query successfully returned all r = 20 patents from the hold-out sample of n = 20 patents, resulting in a one-sided lower bound of p ≥ 0.861. Thus, according to the Clopper–Pearson exact method, while 100% of the validation sample was retrieved, the true recall for the entire patent population is estimated to be at least 86.1% with 95% confidence. This is the conservative lower bound of recall, indicating the search query is very likely capturing the vast majority of relevant patents. The Clopper–Pearson approach was chosen for its accuracy and adaptability for small sample sizes, resulting in a strong and defensible validation of search completeness.

3.1.3. Data Collection

The Lens.org database utilizes a chain of keywords and International Patent Classification (IPC) codes in a structured pattern to identify only relevant patents. Keywords were grouped into three categories: process, method, and IPC code. This way, we aimed not only to include standard hydrogen-related terms but also those specific to ammonia conversions. Process keywords identified patents related to hydrogen production in general, while method keywords focused on ammonia decomposition. A curated collection of IPC codes that are even more accurate since technical classes have been filtered out. All the keywords and codes applied during this process are listed in Table 1.
Table 1. LENS database patent search keywords.
The IPC codes listed in Table 1 represent the technical domains most relevant to hydrogen production from ammonia, catalyst development, and fuel-cell integration. Several codes (B01J23/02, B01J23/10, and B01J23/46) categorize catalysts based on the active metals they contain. Because they are stable and active, iron, nickel, and platinum-group metals are frequently used in the breakdown of ammonia. B01J35/60, B01J37/02, B01J37/08, and B01J37/30 outline the materials and techniques required to produce catalysts. These consist of heat-treatment procedures, precipitation techniques, impregnation techniques, and oxide-based supports. These categories encompass patents that focus on enhancing the shape, dispersion, durability, and overall performance of catalysts.
Apart from that, the chemical classes C01C1/00, C01C1/02, and C01C1/04 encompass general categories covering ammonia chemistry, ammonia synthesis, and ammonia purification. These codes are written into patents that deal with the handling, processing, and purification of ammonia before it decomposes or is converted into electricity. The principal means by which hydrogen is prepared from ammonia comprises catalytic thermal plasma electrochemical C01B3/04 production, in which ammonia is split into hydrogen and nitrogen.
Another technical field related to the invention is F02D19/06, which pertains to engines operating with gaseous fuels, such as hydrogen obtained by the dissociation of ammonia. G01N33/18 also relates to the electrolytic production of hydrogen, such as ammonia electrolysis and AOR-type hydrogen generation. H01M8/06 relates to fuel cells using gases containing hydrogen. For instance, ammonia cracking upstream can provide PEM or solid oxide fuel cells with clean hydrogen. This set of IPC codes is assigned to ensure that, when combined, the searched claims effectively cover all relevant technological developments in catalysts, ammonia chemistry, hydrogen production pathways, and system integration.

3.1.4. Patent De-Duplication and Family Matching

To prevent duplicate counts of identical or closely related innovations filed across jurisdictions, a family-based method was used for patent de-duplication. A publication number in a patent database refers to a single patent document granted by a specific office. A family ID, on the other hand, groups several publication numbers linked by priority relationships and representing the same creative history. Therefore, de-duplication at the publishing level alone can result in innovations being counted multiple times.
Using an enhanced patent family definition and the Lens.org filtering option “grouped by families,” duplicate identification was carried out at the patent family level. To create a single creative cluster, this method automatically gathers and processes patent papers connected by common or relevant priority claims, such as national-phase entries, continuations, and divisionals. Each extended family’s oldest priority paper was the only one we kept for examination; subsequent publications were excluded.
A simple patent family definition, which groups only patents with the same oldest priority application, was not employed since it might fragment closely similar files representing the same basic idea. The extended family method was thus chosen to give a more thorough and realistic portrayal of novel technical ideas in industrial patenting scenarios [26].
The patents were also filtered by publication date and patent type. Additionally, a manual quality control screening was also performed. To achieve this, titles, abstracts, and claims were examined to weed out any duplicates and patents that discussed ammonia in general without offering a unique method of producing hydrogen (e.g., cracking, catalytic breakdown, plasma activation, or electrochemical conversion). This process guaranteed that the final dataset had no duplicates, was based on innovative technical advancements, and was suitable for reproducible patent landscape analysis [27].

3.1.5. Patent Screening and Selection Process

A thorough screening process based on the PRISMA framework [28,29,30] was used to make sure that only relevant and high-quality patents were included in this study. The search began with a comprehensive review of patents on ammonia-to-hydrogen conversion in the Lens.org database. After that, duplicates, irrelevant records, and non-technical entries were slowly deleted. This multi-step filtering approach ensured that the final dataset included only patents that directly addressed ammonia breakdown, hydrogen-extraction pathways, catalytic systems, and improvements at the reactor level. In this study, records refer to the raw Lens.org search prior to filtering. Patents refer to individual publication numbers. After de-duplication, analysis was performed at the patent-family level, where each family represents one invention across jurisdictions. The final validated dataset consists of 708 patent families, which formed the basis for all subsequent classification and trend analysis.
Figure 1 illustrates that the initial search on Lens.org yielded 1394 patent records. This search used process keywords, ammonia-to-hydrogen terms, and IPC categories. After a first-stage de-duplication process eliminated 460 duplicate entries, including mirrored national filings and identical family matches, 943 distinct patent families were selected for preliminary screening. All counts after de-duplication are reported at the patent-family level. The patents were then filtered to include only published patents between 1 January 2005 and 1 August 2025, as well as patent applications, granted patents, and limited patents only. This step eliminated 65 patent families.
Figure 1. Flowchart of patent search review using PRISMA statement.
Before the remaining 869 patent families were thoroughly evaluated, a quality-control check was conducted by examining the titles, abstracts, claims, and technical descriptions of each patent to ensure they all dealt with the synthesis of hydrogen from ammonia. Patents were excluded if they focused on ammonia but were unrelated to hydrogen synthesis, such as fertilizer production, refrigeration cycles, NOx reduction, or general chemical processing, or if they contained misclassified entries or hidden duplicates, or only vaguely referenced ammonia without clearly describing decomposition, cracking, plasma, catalytic, or electrochemical hydrogen-generation mechanisms. This resulted in the removal of 161 patent families, leaving 708 patent families in the validated dataset. These 708 patent families represent the verified corpus for the subsequent analysis of catalyst types, synthesis techniques, system improvements, inventor activity, and geographic distribution.

3.2. Patent Analysis

Patents were categorized using a predefined classification criteria approach established prior to analysis by a main analyst with experience in ammonia-based hydrogen systems and a secondary analyst with the same training. To ensure uniformity and fairness in the dataset, the lead analyst conducted the primary classification and was responsible for all final classification, whilst the secondary analyst independently reviewed a targeted subset of patents flagged as ambiguous or borderline during initial screening. Regardless of the kind of synthesis method, catalyst, or invention under consideration, all determinations about classification were based on the same interpretative criteria.
By doing focused keyword scans of the title, abstract, and claims, patents were categorized. The focus was on providing clear technical explanations of processes such as furnace-based thermal cracking, catalytic breakdown pathways, plasma-based processes, electrochemical conversion pathways, and mechanisms for converting ammonia into hydrogen. The same methodical approach was used to categorize innovation domains and catalyst types, ensuring consistency across all categories.
The two analysts initially agreed on the category for 90% of the patents they reviewed, and all discrepancies were resolved through discussion and consensus, with the predefined classification criteria serving as the basis. This corresponds to a high agreement rate, providing confidence in the classification’s consistency. Further verification was conducted using Espacenet, which could be accessed directly from Lens.org, if the technical information provided by Lens.org records was insufficient for precise classification. Analysts reviewed the original published patent documents using Espacenet to enhance classification accuracy and facilitate a better understanding of the technical disclosures. Patents that disclosed various mechanisms or system features were assigned to numerous categories in accordance with the overlapping classification paradigm employed in this study.
This section outlines the classification framework used to organize and analyze the 708 patent families related to hydrogen production from ammonia.
The classification methodology used in this study, as illustrated in Figure 2, divides the 708 ammonia-to-hydrogen patent families into three main categories: Innovation Types, Catalyst Types, and Synthesis Methods. Every category represents a distinct technological viewpoint, and charting worldwide advancements in ammonia-to-hydrogen research requires an awareness of their importance.
Figure 2. Flowchart of patent classification.

3.2.1. Synthesis Methods Classification

This category describes the process of producing hydrogen from ammonia. It is crucial because different synthesis routes vary significantly in energy demand, operating temperature, catalyst requirements, and scalability. The process of producing hydrogen from ammonia is described in Table 2.
Table 2. Description of each hydrogen production method from ammonia.

3.2.2. Catalyst Type Classification

This category illustrates the functional role of each invention as a catalyst. Catalysts have a significant impact on the rate of ammonia breakdown, reaction temperature, hydrogen purity, and overall system cost. It is easier to determine which catalytic methods are the most popular globally. Table 3 shows the different types of catalysts.
Table 3. Description of each catalyst type used in patents.

3.2.3. Innovation Types Classification

This category describes the innovative ideas behind each patent, which may enable specific applications, enhance system infrastructure, improve process methods, or develop new material solutions. Learning about these one-of-a-kind inventions can help to understand how the industry is evolving and which technological paths are most effective for achieving hydrogen goals—the types of innovations listed in Table 4.
Table 4. Description of each innovation type focused on patents.
Overall, this study produced a high-quality, highly dependable, validated dataset of 708 patent families by combining a systematic PRISMA-style screening methodology, statistically validated recall testing, and a meticulously designed search strategy. This multi-layered strategy eliminated duplicate or irrelevant records, ensuring the final dataset included only pertinent ammonia-to-hydrogen innovations. As a result, the dataset is both high-quality and reproducible, providing a solid basis for trend analysis.

4. Results and Discussion

4.1. Bibliography Results

4.1.1. Result of Synthesis Methods in Patents

A study was conducted on 708 patent families to examine the conversion of ammonia to hydrogen. The data presented in Figure 3a,b show a distinct trend: catalytic cracking remains the leading technique, while only a handful of patents explore multi-method or hybrid approaches. Although plasma-assisted and electrochemical methods are emerging, they are still in the early stages of development. These observations highlight areas where innovation is thriving and where new technological advancements are likely to occur. Percentages are based on the validated dataset of 708 patent families.
Figure 3. (a) Percentage distribution of patent families across individual synthesis methods, (b) Percentage distribution of patent families exhibiting multi-method overlap.
Figure 3a illustrates the distribution of patent families by synthesis methods, with a notable emphasis on thermal catalytic decomposition, which accounts for approximately 85% of single-method usage, as defined in Table 5a. This large fraction indicates that atmospheric-pressure (ambient) catalytic cracking remains the primary method for producing hydrogen from ammonia. In contrast, the more exotic processes, such as thermal decomposition/pyrolysis, plasma-catalytic, and plasma-derived, have efficiencies below 7%, suggesting that their development is not yet complete. Electrochemical decomposition accounts for approximately 5% of patent families, likely driven by growing interest in using renewable energy for ammonia electrolysis. Photocatalytic and PV methods, on the other hand, account for only 1% of the total patent families in the dataset, and these light-driven techniques remain largely at an experimental stage. In general, this distribution shows that catalytic and hybrid routes are now leading mainstream research at all levels, while alternative paths are being developed differently.
Table 5. (a) Classification legend for the various synthesis methods employed in examining patents related to ammonia decomposition. This table showcases all eight synthesis pathways, along with their unique numerical identifiers, which will be referenced in Figure 3a, (b) The legend of overlapping-category identifiers highlights patents that belong to multiple synthesis method classifications.
Figure 3b shows that 98% of patent families use only one synthesis method, while 2% use multiple methods, as defined in Table 5b. This limited overlap suggests that, to date, the combination of different hybrid systems, such as catalytic and plasma-based or catalytic and electrochemical, is relatively rare. Most advances focus on improving a single route of ammonia decomposition. Indeed, conventional catalytic cracking remains the dominant method for producing hydrogen from ammonia in the patent literature. The small number of integrated hybrid patent families (only ~2% of the dataset) indicates that multi-method systems are still in their infancy. However, these few early examples hint at a promising future for hybrid ammonia decomposition technologies.
Figure 4 illustrates the distribution of patent families across ammonia decomposition synthesis methods for hydrogen production. Thermal catalytic decomposition remains the most common synthesis method, with 84.18% of classified patent families utilizing it. It is commercially viable, features well-known catalyst systems, and has been extensively studied. The other synthesis methods are less common, including thermal decomposition/pyrolysis (2.82%), plasma-catalytic (1.98%), and plasma-based (1.41%). This means that plasma-assisted activation appears as an emerging area, but it is not yet very common. 5.23% of patent families involve electrochemical decomposition, indicating an increasing interest in using electricity to split ammonia into hydrogen, a clean energy source. Photocatalytic and photo-based methods are relatively uncommon, accounting for just over 1% of the total patent families. A very small fraction (<2%) of patent families use hybrid combinations (e.g., thermal + electrochemical), underscoring that such multi-method systems are still rare. Other approaches are being developed right now, but they may lead to new technologies.
Figure 4. Distribution of patent families across each hydrogen-from-ammonia synthesis method (including a combined category for hybrid multi-method cases).

4.1.2. Result of Catalyst Types in Patents

The analysis was also conducted to categorize catalyst-related innovations in the production of ammonia-based hydrogen. Six main catalyst categories were evaluated, and the results reveal several dominant trends and characteristic overlaps across the patent landscape. Percentages are based on the validated dataset of 708 patent families.
Figure 5a shows the percentage of patent families given to each of the six catalyst types, as defined in Table 6a. The results show that 75% of all patent families are decomposition catalysts (ammonia-decomposing catalysts). These are also the most common types of catalysts on the market. This indicates that catalyst-assisted thermal breakdown remains the most common approach for researching the conversion of ammonia into hydrogen. The frequency of other catalyst types is much lower. Ammonia-oxidizing catalysts are next at 5%, while electrode-based and membrane-separation catalysts are next at 6% apiece. Only 3% of all patent families are for processes that do not need a catalyst, and only 4% are for catalysts that use ammonia as a fuel. Most patent developments involve technologies that address breakdown. Only a few patents deal with oxidation, membrane-assisted, or electrochemical pathways as separate solutions.
Figure 5. (a) Percentage distribution of patent families across individual catalyst types; (b) Percentage distribution of patent families exhibiting multi-catalyst-type overlaps.
Table 6. (a) Legend descriptions for each catalyst type used in Figure 5a, (b) Legend descriptions for the percentage distribution of patents across overlapping catalyst categories. For example, Legend 1 represents patents assigned to only one catalyst category (with no overlap), while Legend 2 represents patents containing two catalyst types (with overlapping categories).
Figure 5b shows how frequently catalyst-type overlaps occur among the patent families, as defined in Table 6b. Approximately 82% of them are single-category patent families, meaning they utilize only one type of catalyst and do not work with any others. This means that most patented systems employ a single, precise catalytic mechanism, rather than hybrid systems. Two-category overlaps, on the other hand, make up 13% of the total. These two-category overlaps typically involve one patent family addressing two functions (e.g., an ammonia-decomposition + combustion system). Only 4% of the total comprises three-category overlaps, and less than 1% (0.56%) comprises four-category overlaps. These results indicate that hybrid or multifunctional catalyst systems are becoming more prevalent, yet they still represent a minor segment of the overall patent landscape.
Figure 6 presents a more detailed breakdown of how patents are distributed across different types of catalysts and their combinations, expressed as a percentage of the total dataset. The biggest group is for catalysts that break down ammonia. This group holds 76.84% of all patent families, which is significantly more than any other group or combination. This shows that the primary focus of research and development in the production of hydrogen ammonia is catalytic decomposition. On the other hand, most categories have low shares (generally <1%). This includes Electrode-based + membrane (0.14%), Oxidizing-only (0.14%), Electrode-only (0.42%), and Membrane-only (0.71%). Finally, the four-way overlaps (such as decomposing + oxidizing + electrode-based + membrane-separation) and no-catalyst patents (4.10%) are the least common types. This indicates that fully integrated, multi-functional systems are still relatively uncommon. The bar graph clearly indicates that decomposition catalysts are the most significant component of the patent landscape. Other catalytic processes only add small amounts to the total.
Figure 6. Percentage of patent families classified by catalyst type and catalyst-type combinations, showing the overwhelming predominance of ammonia-decomposing catalyst technologies.

4.1.3. Result of Innovation Types in Patents

This section presents the results of the innovation-type classification applied to the entire patent dataset. By evaluating patents according to defined innovation categories and identifying both single- and multi-category overlaps, the analysis provides insights into the dominant technological directions and the degree of integration across ammonia-related innovations. Percentages are based on the validated dataset of 708 patent families.
Figure 7a illustrates the various types of innovation, with system-level innovations accounting for the largest share at 36.04%, as defined in Table 7a. This indicates a strong emphasis on incorporating ammonia-based technologies into larger system designs. 26.92% of the time, new processes or methods are used to improve reaction pathways and operational strategies. Catalyst-focused innovations account for 20.48% of the total, highlighting the importance of catalytic materials in enhancing ammonia decomposition. The other categories, materials or equipment (6.61%), engineering or reactor design (4.85%), applications (4.18%), and infrastructure (0.92%), do not appear as frequently, which suggests that these areas receive less attention in patenting.
Figure 7. (a) Percentage distribution of patent families across each individual innovation-type category, showing how patents are concentrated in specific innovation domains, (b) Percentage distribution of patent families with overlapping innovation types, indicating the number of patents that span multiple innovation categories.
Table 7. (a) Legend definitions for each innovation-type category used in Figure 7a, including system-level, process-level, catalyst-level, equipment-level, engineering, application, infrastructure, and other classifications, (b) Legend definitions for the overlapping-category groups used in Figure 7b, indicating how many innovation-type categories each patent falls into.
Figure 7b illustrates the overlap between different types of innovation, as defined in Table 7b. Approximately 39% of patent families are for a single type of invention, indicating that many inventions are focused on a specific area. However, the majority—55.5%—combine two types of innovation, indicating that dual-domain integrations, such as system–process or catalyst–process, are standard. Only 5.4% of patent families fall into three categories, and only 0.1% into four.
Figure 8 displays a bar graph that includes both single and combined innovation categories. The most common combination is System + Process, accounting for 28.2% of the total. This illustrates the close relationship between system design and process optimization in ammonia-related technologies. Other big groups are Catalyst-only (16.7%), System-only (15.4%), and Catalyst + Process (6.6%). These numbers demonstrate the crucial role catalysts and system architecture play in breaking down ammonia and producing hydrogen. Catalyst + Material (4.7%), System + Application (3.7%), Catalyst + System (2.8%), and Process-only (2.3%) are less common combinations that appear at significantly lower rates. Most combinations with three or more categories are less than 1%, which shows that new ideas that cross multiple domains are rare. The bar graph indicates that most new ideas in this field fall into one category or simple two-category combinations.
Figure 8. Patent family percentages for innovations in innovation type categories.

4.1.4. Results of Patents Based on Their Publication Dates

Several time-based variables were used to examine the final, validated dataset of 708 patent families to understand global innovation patterns in ammonia-to-hydrogen technology. Analyzing publishing, citation, and inventor participation patterns can reveal insights into the field’s rate of expansion, the technologies attracting the most interest, and the areas where significant advancements are being made. These graphs provide context for the technological maturity of ammonia-cracking processes, particularly thermal-catalytic techniques, and demonstrate worldwide momentum that can inform future research priorities, technology adoption, and hydrogen development strategies.
Figure 9 illustrates the annual number of patent documents published between 2005 and 2025, categorized into three groups: patent applications, granted patents, and limited patents. The findings show that patenting activity remained relatively stable from 2005 to around 2017, followed by a noticeable increase beginning in 2018. Following 2020, patent applications increased significantly, reaching a peak in 2024–2025. This surge reflects the rising global interest in ammonia-to-hydrogen technologies, driven by decarbonization goals, concerns about supply chain security, and a growing recognition of ammonia’s potential as a hydrogen carrier. Patent applications are growing faster than granted patents, indicating a dynamic, creative phase of innovation marked by the continuous emergence of new catalysts, system designs, and technological concepts. Overall, these temporal patterns highlight the value of patent trend analysis in predicting future technological directions and identifying promising solutions for upcoming hydrogen energy projects.
Figure 9. Graph of patent documents published per year, categorized by document type.
Figure 10 shows the average number of forward citations received by patent documents published annually, broken down by limited patents, granted patents, and patent applications. Forward citation counts indicate how earlier inventions have influenced subsequent patent applications and disseminated knowledge. Older patents (2005–2010) have higher average citation counts, especially among granted patents, indicating that they served as foundational building blocks for subsequent innovations, particularly in thermal-catalytic cracking technologies. Although the number of patent filings has increased since 2018, the average number of citations has decreased, because more recent patents have had less time to accumulate references. This pattern suggests that thermal-catalytic cracking remains a mature and influential technological pathway. In contrast, emerging areas, such as plasma-catalytic and electrochemical decomposition, are still in their early stages of development. Nonetheless, these newer approaches point to important future growth directions and opportunities for next-generation ammonia-to-hydrogen systems.
Figure 10. Average forward citation (cited-by patent count) over time by document type.
The average number of backward citations is shown in Figure 11, broken down by patent applications, granted patents, and limited patents. Backward citations are the number of prior patents that each newly published patent references. Backward citation counts indicate the extent to which new inventions build on preexisting technological knowledge. Peaks in backward citations, especially in patent applications from 2011 to 2023, indicate stages of technological consolidation or gradual improvement during which inventors heavily relied on prior art. The comparatively stable backward citation levels observed in the years that followed suggest that established thermal-catalytic cracking designs, such as integrated heat-exchange systems, alumina-supported catalysts, and Ni- or Ru-based catalytic configurations, will likely continue to be used. As a result, Figure 11 shows that thermal-catalytic cracking remains the most developed and well-supported pathway in the ammonia-to-hydrogen innovation landscape, providing a solid and trustworthy knowledge base for hydrogen applications in the near future.
Figure 11. Average backward citation (cited patent count) over time by document type.
This graph in Figure 12 illustrates the average number of inventors per patent document issued between 2005 and 2025, categorized by patent applications, granted patents, and limited patents. Compared to granted or limited patents, patent applications typically involve larger inventor teams, as shown by the average number of inventors per patent across various document types from 2005 to 2025. This trend gains traction after 2018, when the global push for ammonia-to-hydrogen technologies drives increased interdisciplinary collaboration in catalyst design, system engineering, and low-temperature ammonia decomposition. Periodic peaks, particularly in granted patents from 2012 to 2014, indicate significant technological advancements led by large research teams in countries such as the United States, China, and Japan. The overall upward trend suggests that research and development activities are becoming increasingly complex, underscoring the growing demand for interdisciplinary expertise in thermal engineering, materials science, plasma-assisted processes, and system integration. This trend highlights the importance of establishing collaborative research networks, both domestically and internationally, to support hydrogen innovation and the development of ammonia-based hydrogen pathways that align with energy transition goals.
Figure 12. Average Inventor Count Over Time by Document Type.
Table 8 and Figure 13 show the temporal trend in the ratio of ammonia-to-hydrogen patent documents published in major jurisdictions between 2005 and 2025. The graph illustrates a clear shift in global patent activity, with China emerging as the dominant jurisdiction over time. Prior to 2010, China’s patent filings were minimal; between 2010 and 2013, there were a small number of applications; and after 2018, there was a significant increase. A rapid rise is observed from 2020 onward, peaking in 2024, reflecting China’s growing role in ammonia-to-hydrogen innovation. Other jurisdictions, including the United States, Japan, the Republic of Korea, and the World Intellectual Property Organization (WIPO), make consistent but smaller contributions, indicating ongoing research activity on a smaller scale. In contrast, Australia, Canada, France, and the Netherlands have consistently low and infrequent filing rates.
Table 8. Published patents from each country in each year.
Figure 13. The trend of published patent documents by country and year.
Overall, the table and graph highlight China’s leading position alongside secondary innovation clusters in advanced economies, providing insight into regions with concentrated technological expertise and potential for collaboration or technology transfer.

4.1.5. Results of Patents Based on Document Count

This section examines patents by inventor, applicant, owner, and filing jurisdiction to identify the primary forces driving global innovation in ammonia-to-hydrogen technologies. The structure of the research ecosystem, whether controlled by universities, industrial laboratories, or national research agencies, can be revealed by examining who creates these patents and where they originate. This also indicates the countries with the strongest technological commitment to ammonia cracking. These insights, which highlight the people, organizations, and geographic areas influencing the field, complement the previous time-based analysis and provide valuable guidance on potential research models, technology sources, and collaboration partners for future hydrogen development. Percentages are based on the validated dataset of 708 patent families.
Figure 14 illustrates the distribution of patent contributions among individual inventors based on the number of patent documents in the analyzed dataset. A small number of prolific inventors account for a significant portion of total patent output. Luo Yu is second with 43 patents, while Jiang Liliang has 47. Chen Chongxi, Lin Li, and Hong Zhengpeng are three other inventors who have made significant contributions, each with 15 to 24 patents. In contrast, the remaining inventors hold 8 to 12 patents each. This pattern suggests a high concentration of inventive activity within a small number of specialized research teams, most likely affiliated with major Chinese research institutes conducting long-term and intensive research on ammonia cracking and hydrogen generation technologies. The observed concentration points to continuity, specialization, and ongoing innovation within established research groups.
Figure 14. Number of patents invented by different inventors.
Figure 15 shows the universities and organizations that have filed the most patents for ammonia-to-hydrogen technology based on the analyzed patent dataset. Fuzhou University has the most patents, with forty filings. Other prominent industrial and research organizations include Fuda Zijin Hydrogen Energy Technology (21 patents), China Petroleum & Chemical Corporation (17 patents), and the Dalian Institute of Chemical Physics (15 patents). Many applicants, including universities, state-owned corporations, and national laboratories, contribute to patenting activity, each filing 7 to 14 patents. This distribution indicates that both university research institutions and large corporations, particularly those in China, are actively involved in ammonia cracking innovation. The combination of university-led scientific research and industry-led system engineering demonstrates that the innovative ecosystem has matured. Research institutions and policymakers can use these observed trends to inform efforts to establish hydrogen research and development (R&D) ecosystems by enhancing collaboration among institutions and companies.
Figure 15. Number of patent families by different applicants.
Figure 16 shows that, according to the analyzed patent dataset, a variety of organizations and institutions hold patents related to ammonia-to-hydrogen technologies; however, the majority of owners hold only one to three patents. Saudi Aramco leads with six patents. It is shown that Toyota holds three patents, but Hitachi Zosen, BASF, Apollo Energy Systems, Bloom Energy Corporation, and Siemens have also made minor but equally significant contributions. Many companies are researching ammonia-to-hydrogen technologies on a small scale, often focusing on specific applications such as catalysts, system components, or integrated hydrogen systems, as evidenced by their low patent counts. According to this variety, ammonia cracking is a competitive and rapidly growing field, with several organizations simultaneously working on novel ideas. The presence of well-known businesses worldwide suggests potential technology suppliers and business partners in this innovative environment.
Figure 16. Number of patent families owned by different assignees.
Figure 17 illustrates the global distribution of ammonia-to-hydrogen patent documents by filing jurisdiction (patent office), based on the examined patent dataset. The distribution is highly uneven, with China leading the way with 423 patents, far outnumbering all other jurisdictions. Countries such as Australia, Canada, the United Kingdom, France, Luxembourg, Bulgaria, and the Netherlands each contribute a small number of patents. A second tier of patent activity has been observed in the Republic of Korea (65), the United States (60), WIPO international filings (59), Japan (58), and the European Patent Office (24), indicating strong engagement from advanced economies. This distribution not only highlights China’s dominance but also paints a clear picture of regions with high concentrations of technical expertise, identifying jurisdictions that could be important partners for technology transfer and international collaboration. Overall, the figure depicts a concentrated innovation landscape dominated by China, with specific regions emerging as significant contributors to the development of ammonia-to-hydrogen technologies.
Figure 17. Number of patent families by filing jurisdiction. Jurisdictions correspond to the patent filing offices.

4.2. Technology Updates

The technology updates from selected patents on hydrogen production from ammonia were organized by synthesis pathway: thermal, thermal-catalytic, plasma-based, plasma-catalytic, electrochemical, and photocatalytic, as well as a set of unique routes (e.g., photo-driven, mechanochemical ammonolysis, and chemical-chain methods). The analysis identifies key inventions and process advances to illuminate technological progress.

4.2.1. Thermal Catalytic Decomposition

  • With ammonia-decomposing catalysts
This method found that 84.1% of the patents chosen are for thermal catalytic decomposition. The oldest patent is from 2005, and the newest is from 2025. The first patent for this method, US6936363B2, was filed in January 2003 and has 70 forward citations and seven references to previous patents. In August 2005, it got its first granted patent. A small hydrogen-generation system produces H2 by accelerating the decomposition of heated ammonia (NH3) from liquid or degassed water storage. At 500 to 750 °C, alumina pellets that have been treated with Ni, Ru, or Pt catalysts are used. An electric heater or a catalytic or lean-gas burner that runs on fuel-cell anode off-gas provides heat. Polymer-electrolyte fuel cells need to be cleaned after use, but alkaline fuel cells can use a hydrogen–nitrogen mixture [31].
On the other hand, the US12442324B1 patent uses an ammonia cracker as part of the vehicle’s thermal system for internal combustion engines. A high-surface-area Inconel® 625 heat-exchange catalyst is activated by the heat from the engine’s exhaust. This catalyst can be 3D-printed as a triply periodic minimal surface (TPMS) lattice or tube-bundle core. A secondary electrically heated catalyst downstream ensures hydrogen production during cold starts or at low loads. Electronic control handles temperature, pressure, and expansion. It coordinates plate heat exchangers and valves to deliver a controlled H2/N2 mixture, optionally co-fed with NH3, to hydrogen and ammonia fuel rails and injectors without using fossil-fuel promoters. The technology makes hydrogen and uses ammonia as a heat-transfer fluid on the cool side. Radiator bypass channels and active grille louvers aid thermal management, enabling a smaller or even removable radiator and thereby improving aerodynamics. This new design is a vehicle-integrated ammonia-to-hydrogen combustion and thermal-management system for spark- and compression-ignition engines. The old design had an externally heated ammonia cracker for fuel-cell applications [32].
JP2005145748A is the second-most-cited patent (49 citations) and the second-earliest patent, filed in November 2003. This patent shows a hydrogen generator for vehicles that use liquid ammonia as a hydrogen carrier for fuel cells. Liquid NH3 is stored, turned into gas, preheated with heat from the reactor, and broken down over a cheap Ni/Al2O3 catalyst at 800–900 °C. The system can provide hydrogen for a 102 kW Polymer Electrolyte Fuel Cells (PEFC) while keeping the residual NH3 in the reformate below ~300 ppm. It contains ~10 L of catalyst and has a space velocity of ~3000 h−1. A water-based ammonia remover then absorbs most of the remaining NH3, reducing its concentration to a few ppm, which is safe for PEFC operation. The design also captures heat, re-evaporates absorbed NH3, and returns it to the storage tank, using the water from the fuel cell product again. Overall, this is a thermally heated, catalytic NH3 cracker with built-in NH3 scrubbing and recycling that is designed to provide low-ammonia hydrogen to automotive PEFCs [33].
The patent CN201395510Y was filed in March 2009. It was granted in February 2010. This is the third-oldest patent. This patent is for a large hydrogen-rich gas generator that utilizes catalytic ammonia decomposition in long alloy reaction tubes heated by burning natural gas or LPG. This makes the heat flow faster than electric heaters. Adding ammonia to steam accelerates the reaction and enhances cracking efficiency. The gas mixture is approximately 75% H2 and 25% N2, and it flows at rates exceeding 1 × 105 Nm3/h and pressures of up to 2.0 MPa. The system features a two-step heat exchange and a loop for washing and soaking in demineralized water to remove more NH3. This maintains the NH3 level below 1 × 10−5 v/v and returns ammonia to the circulation system. The heat wasted from the cracking furnace is used to generate more steam. This makes the entire system work more efficiently in terms of heat. All of these parts work together to create an effective ammonia cracking system that burns the ammonia to generate heat, ensuring good heat integration and purification. This system can always make very pure mixtures of hydrogen and nitrogen gas, which are used to break down industrial catalysts [34].
CN201512408U is the 4th earliest filing, filed in June 2009 and granted in June 2010. They relate to a small ammonia cracking furnace heated by combustion, which can be used to supply hydrogen for catalyst reduction on factory scales. Ammonia in liquid form is pumped to an evaporation heat-exchange vessel/vaporized/and then introduced into a vertical reaction tube containing a nickel catalyst for thermal decomposition of the ammonia. A diesel- or natural-gas-fired burner located at the bottom of the reactor generates elevated temperatures necessary for catalytic NH3 decomposition (2NH3 → 3H2 + N2). The unit features a double-layered evaporator that extracts heat from cracked gas to preheat the incoming ammonia, thereby enhancing thermal efficiency. A thermocouple is attached to control the temperature, and a simple outlet tube leads away the hydrogen–nitrogen mixture formed. The system has a low start-up cost and does not require storing or supplying hydrogen externally, making it a safe and cost-effective option for generating hydrogen on-site. All in all, it is an easily constructed and applied ammonia cracker based on a common Ni catalyst, designed for ruggedness [35].
KR102247199B1 is the third most cited-by-patent (40 citations) applied for in December 2020. This patent discloses a non-site, modular technology for high-purity hydrogen generation via the traditional thermal catalytic decomposition of ammonia, followed by Pressure Swing Adsorption (PSA) purification. The liquid ammonia is pumped, waste-heat-vaporized, and preheated to 300–500 °C before being fed into a packed-bed reformer equipped with supported metal catalysts (Ru, Pt, Pd, Rh, Ir, or Ni/Co/Fe/Cu/W/Mo oxides). Ammonia is then decomposed at 500–700 °C, producing hydrogen and nitrogen. The product is cooled and fed to (Temperature Swing Adsorption) TSA or PSA towers containing zeolite or activated charcoal to eliminate any remaining ammonia, ultimately achieving a concentration of 1 ppm. A succeeding PSA or Vacuum Pressure Swing Adsorption (VPSA) stage discharges nitrogen and yields hydrogen at 70–90% of the theoretical yield, with a purity greater than 99.999%. Extensive heat integration, including the use of reformer exhaust for ammonia vaporization and preheating, as well as adsorbent regeneration, contributes to a low external energy requirement. The system is constructed as compact box-type modules that can be conveniently installed and scaled up for the production of high-purity hydrogen [36].
The most-cited patent (375 citations) issued in December 2022 is US11795055B1. The present invention is generally related to a burner-heated ammonia cracker with an integrated fuel cell for low to medium H2 demand. Liquid or gas NH3 (<2bar) is then fed to a thermal catalytic cracker (500–750 °C) where it can be cracked to H2/N2, which can be directly introduced into an alkaline fuel cell; in case of Proton Exchange Membrane (PEM), just a simple polishing step (Pd membrane/activated carbon) has been considered after the cracker to Ds remove NH3 from the feed. Crucial to the system is an energy cycle: some of the fuel-cell H2 off-gas is combusted in a catalytic/lean-gas burner and used to generate endothermic cracking heat, enabling fast start-up and a low specific weight per kW. Besides the catalysts, the patents suggest two reactor geometries (stackable plate-type crackers and tubular crackers) for efficient heat transfer at 500–650 °C. The burner position, along with the use of ammonia preheating, is used to stabilize the catalyst bed properly [37].
The 2nd-most-cited patent (119 citations), applied for in September 2020 and granted in February 2025, is US12227414B2. The invention discloses a small, electrically heated reactor for cracking ammonia into hydrogen as needed. Traditional Ru/Fe/Co ammonia-decomposing catalysts are supported on a conductive metallic monolith (e.g., FeCrAl) with a ceramic wash coat (Al2O3, ZrO2, MgAl2O3, CaAl2O3), and by direct Joule heating can be brought rapidly to ~300–700 °C and optionally up to 1300 °C without the need for a fired furnace. The reactor is characterized by close thermal coupling, a pressure shell with an interspace, an optional bayonet heat recovery design, and power-controlled temperature regulation. By modulating the electrical input and flow rate, the system can rapidly switch between different operating conditions, providing flexibility for decentralized NH3-to-H2 conversion. It, in combination with PSA/TSA or membrane purification, and with fuel cells or gas engines, forms a flexible, highly effective thermal catalytic cracker as an alternative to the electrochemical unit [38].
WO2007/119262A2 has the broadest territorial coverage in terms of the number of all possible jurisdictions: 13 (Japan, Eurasian Patent Organization, Canada, Mexico, Australia, United States, European Patent Office, South Korea, Italy, China, Brazil, Israel, WIPO. This patent describes a self-contained ammonia-to-hydrogen supply for the alkaline fuel cells. Liquid NH3 (≈10 bar) is split into three cascaded steps: two electrically heated thermocatalytic reactors (Mechanical Alloying (MA) alloy body first, CoO/Cr2O3 ring stack second, 500–750 °C) carry out the central part of NH3 decomposition, and a microwave waveguide with hot high-potential alloy wires completes dissociation of remaining NH3 by EM resonance. The trace amount of NH3 is then removed by a wet absorption scrubber, leaving the H2/N2 stream hydrocarbon-free and low in ammonia, making it suitable for alkali-fuel-cell vehicle applications [39].
US2025/0121344A1 (filed December 2024) has the most extended families (45 extended families) of those with jurisdictions in Saudi Arabia, Eurasia, the United States, Europe, China, and WIPO. An electrically (Joule) heated structured catalyst for endothermic reactions, such as the NH3 cracking to H2, is described by this patent. As heater and carrier, a 3D-printed or extruded conductive monolith is selected; it is coated with a ceramic insulating wash coat onto which conventional NH3-decomposition catalysts (Fe, FeCo, Ru/Al2O3) are deposited. As heating is internal and very near to the active phase, the reactor can be rapidly started up for uniform operation at 400–700 °C, and then fabricated into a small, high-pressure (2–200 bar) device, thus meeting the decentralized applications of H2 from NH3. And so, instead of a new catalytic material, the innovation is system/reactor integration [40].
US10753276B2 tied for the second-highest number of extended families (17 extended families) among its nine distinct office jurisdictions, Canada (CA), Korea (KR), the United States (US), Australia (AU), Great Britain (GB), Japan (JP), China (CN), Europe (EU), and WIPO. A gas turbine system based on a UJSP generally includes a power generator driven by the turbine. The structure comprises a first ammonia-cracking chamber and a second ammonia-cracking chamber filled with noble-metal catalysts [e.g., Ru, Rh, Pt, Pd], in which ammonia is thermally decomposed into a hydrogen-rich gas. This internal hydrogen source stabilizes and intensifies the burning of ammonia in two stages of a combustion chamber. The first chamber conducts primary combustion and turbine driving, while the second operates at a higher equivalence ratio to form NH2− species, which facilitate NOx reaction and minimize emissions. The turbine exhaust heat, which would otherwise be wasted, is carried through the cracker chambers to maintain the catalyst at a high temperature without requiring any external heat source, and may also be utilized as process steam in an independent expander to generate additional power. Thus, the invention is a highly efficient ammonia-fired power system with integrated capabilities that utilizes catalytic ammonia-cracking for clean combustion and NOx reduction, as well as for maximizing heat recovery [41].
CA2883503A1, filed August 2013, which is the third highest number of extended families (15 extended families) and family jurisdiction of 7: Europe/Korea/US/CN/JP/WIPO/CA. A high-performance ammonia-decomposition catalyst employing a dormerite-type support (C12A7), whether a hostile electron system or a hydrogen-negative ions system, is provided by this invention. Reactive transition metals, including Ru, Ni, and Co, are highly dispersed over this support and can perform the NH3 conversion more effectively at temperatures of ~350–600 °C (at higher space velocity) than typical Ru/Al2O3 or Ru/CaO. Electrons or hydride species are accommodated in the mayenite cages, which, when occupying their active site, can modulate the behavior of the active metal and facilitate ammonia decomposition to achieve effective CO/CO2-free H2 + N2 production across a broad range of NH3 concentrations. As the support is abundant, nontoxic Ca–Al–O oxide, the catalyst exhibits high activity at a lower cost and better resource efficiency for NH3 hydrogen production [42].
CN120155131A is the 2nd recent invention and was applied by the University of Shanghai Jiaotong in March 2025. A type of small-sized, high-efficiency self-heating ammonia decomposition reactor, which combines burning, heat recovery, and catalysis cracking system by a three-level nested structure, is disclosed. As an internal heat source, ammonia–hydrogen co-combustion is employed to address ammonia’s poor ignitability and eliminate the need for external furnaces. Hot exhaust gases from the reaction zone are recirculated around the reaction layer, allowing heat to be used more efficiently and maintaining a high reactor temperature, thereby reducing energy consumption. Ammonia is fed into the catalytic reaction layer (Q) (catalytic filled with). This Ru-based granular catalyst can be converted, at 450° C, by more than 99%, and travels upward through spiral flaps that enhance mixing (mixing), residence time (residence period of time), and decomposition completeness (decomposition entirety). With a hydrogen productivity of 50 Nm3·(m3·h)−1, the reactor design may find applications in mobile or decentralized ammonia-to-hydrogen processes, such as onboard marine engines and refueling stations. In general, the present patent discloses a system-level innovation in autothermal ammonia cracking, demonstrating greater compactness and improved combustion stability, with a focus on high heat recovery rather than a novel catalyst material [43].
At the same time as the application of CN120155131A by the same applicants, patent CN119951503A discloses a low-Ru, low-temperature, and high-activity Ru-based catalyst for thermal catalytic ammonia decomposition to hydrogen based on a core–shell Ru/CeOx@N-doped porous carbon structure. A Ce-based metal–organic framework (Ce-BTC) is initially prepared via a hydrothermal method from Ce(NO3)3·6H2O, H3BTC, and PVP in the mixed solvent of ethanol/DMF and further transformed by argon calcination into a CeOx@porous carbon composite with a large surface area and adjustable porosity. The Ru precursors (Ru3(CO)12, Ru(NO)(NO3)3, Ru(acac) 3 or RuCl3) are first deposited by impregnation (3 wt % Ru compared to the calcined support), and then heat-treated under Ar (300 °C then 550 °C); highly dispersed sub-nanometric sized of active nanoparticulates are obtained, which are confined in a carved cavern CeOx@N-doped porous carbon. The catalyst particles that are obtained (40–60 mesh) are then screened for the NH3 decomposition in a quartz-tube, fixed-bed flow reactor under NH3 flow (GHSV ≈ 2000 mL·h−1·g_cat−1). Detailed studies reveal that Ru3(CO)12/CeOx@PCN exhibits the highest activity and selectivity, with approximately 80–88% of NH3 conversion at 350 °C and >98% of ammonia (NH3) conversion recorded after reaction at 400 °C, benefiting from improved intrinsic activity, outperforming both conventional Ru/oxide or Ru/carbon catalysts in terms of stability and reducing Ru consumption. The improved reaction rate is proposed to stem from the synergistic interaction between CeOx (containing oxygen vacancies and variable valence state Ce3+/Ce4+), N-doped porous carbon shell, and Ru electronic structure modifications, therefore suggesting a promising Metal–Organic Frameworks (MOF)-derived, low-Ru-content catalyst strategy for NH3-based efficient Low-Temperature H2 production [44].
CN120268340A is the most recent invention applied for in June 2025 by the Hebei Academy of Sciences, the Institute of Energy, and Shijiazhuang Tiedao University. This patent relates to an integrated ammonia-cracking hydrogen generation apparatus in which the cryogenic energy of liquid ammonia is effectively utilized to improve the overall process heat efficiency. Ammonia vaporization, catalytic cracking, hydrogen purification, compression, and storage, scaled down to refueling, are integrated into one single unit. Ammonia is then decomposed into hydrogen and nitrogen by thermal dissociation, and the gas is purified and compressed in a multistage process, with recovered cold used as an intercooler, enabling near-isothermal compression with lower power demand. This system, charged with off-peak electricity, can store hydrogen and cold energy, which will be used to produce a BF-natural gas mixture during refueling at higher daytime temperatures. It enhanced performance efficiency, safety, stability, and economic feasibility simultaneously. On the whole, it is a system-level innovation that focuses on multistage energy recycling and integrated operation rather than catalyst development [45].
CN223127277U was submitted in September 2024, and the 3rd most recent patent (July 2025). It reveals an integrated, coupled dual-source hydrogen production system that combines alkaline water electrolysis with ammonia catalytic decomposition. Alkaline electrolyte from electrolysis is recycled in an ammonia distillation column, where it decomposes readily, volatilizing ammonia over Ni or Ru catalysts to form H2 and N2. Hydrogen coming from both electrolysis and decomposition is purified (adsorption) and mixed in order to be utilized downstream. The system is hybrid at the level of system/integration and not at the conventional catalytic cracking (like ammonia decomposition in a usual reactor), since it combines electrochemical with thermal catalytic hydrogen production [46].
GB2633197A is the second latest granted patent (October 2025). An additional system-level innovation in industrial ammonia cracking is also offered for patenting, which employs two reactors: a primary furnace-heated catalytic cracker and a secondary, smaller ammonia cracker. The secondary reactor makes a hydrogen-rich cracked gas, which can be used to: (1) reduce oxide catalyst in the reformer during start-up; (2) provide a hydrocarbon rich fuel stream for lighting the burners if ammonia alone will not sustain flame formation; (3) suppress nitriding by having a lower partial pressure of ammonia entering and remaining on surfaces in the reformer tubes; and/or during continual operation. The primary reactor uses standard Ni- or Ru-based NH3-decomposing catalysts in furnace-heated tubes, as in steam reforming. The secondary reactor may be adiabatic, electric, or gas-fired, allowing separated synthesis of cracked gas when the central plant is operating below full scale. Other possible attributes include PSA hydrogen purification, tail-add gas recycle as fuel, and double feed (fresh vs. pre-cracked ammonia). In conclusion, the system offers reduced operational risk at start-up, improved catalyst activation, an extended operating range, and enhanced process efficiency for large-scale hydrogen production from ammonia [47].
The latest patent is CN117509537A (October 2025). The present invention relates to a method for dissociating NH3 at low temperatures using electrical energy. This is an improvement over conventional thermal catalytic cracking, which occurs only during temperatures above 400 degrees Celsius. Synthesizing the Ni/Co/Fe–CexZr1−xO2 catalyst through solution combustion and activating its low temperature performance using an indirect electric field can convert a considerable amount of NH3 at temperatures less than 250–300 °C without requiring external heat sources. When the new process described here uses very stable electric fields, a small amount of nano-SiC (a few %) is used as an assisting material. When an electric field is applied at 250 °C, some catalysts convert at 50–60%, which contrasts markedly with thermal-only conversion efficiencies (less than 10%). Based on the design, ammonia cracking could be substantially enhanced by an electric field, even at low pressures. The little bit that it might be helpful is if one has a small hydrogen plant of 3–10 Nm/h, which should be expanded in the future when heating with natural heating no longer works (i.e., too hard to reach the temperature) [48].
  • With ammonia-oxidizing catalysts
The first and only patent is CN120325293A, which was filed in March 2025. This report presents a novel series of Pd–transition–metal core–shell nanocatalysts (Pd@M, where M = Co, Fe, Cu, Zn, Ni, Cr, and Mn) that enable low-temperature, continuous hydrogen production via the oxidative dehydrogenation of ammonia. Microwave-assisted microemulsion–gas-induced synthesis is used, and Pd cores are strengthened by a uniform transition-metal shell that makes them more stable, better at transferring hydrogen, and less likely to oxidize. When reduced, catalysts are very active between 75 and 300 °C (the actual bed temperature is 90–350 °C), with Pd0.7Co0.3 at ~90 °C beating those of Pd-only or single-metal controls. The core–shell structure enables conversion of NH3 at low temperatures, well below the standard thermolysis temperature of ≥400 °C. This is a step forward for the O2-promoted route of NH3 decomposition. Ammonia is a promising way to produce hydrogen on a large scale at low temperatures because it uses only cheap, readily available precursors and is easy to produce [49].
  • With ammonia-decomposed and ammonia-combusting catalysts
The earliest invention, the most cited-patent (107 citations), and the highest number of extended families (19 extended families) are US7875089B2, which was filed in March 2004. Its nine family jurisdictions cover the US, Japan, Europe, Korea, Australia, China, Mexico, and WIPO. This patent describes a small, portable NH3 → H2 generator for small fuel cells. It utilizes thermal catalytic ammonia cracking in a microchannel/finned reactor operating at a moderate temperature (approximately 550–650 °C). This means it can be made of stainless steel or titanium and does not need high-temperature alloys. A small burner (using butane) generates most of the heat, but there are also options for electric or autothermal NH3 heating. The unit adds a small, acid-impregnated carbon adsorber that is cooled by the incoming liquid NH3. This is because lower-temperature cracking lets some NH3 slip through. As a result, the outlet H2/N2 is fuel-cell grade (<1 ppm NH3). Ammonia-decomposing catalysts (such as Ru/Al2O3 or Ni) are utilized, and the new concept involves combining systems and reactors to produce portable fuel cell power [50].
The most cited-by-patent (58 citations) is WO2011/107279A1, which was filed in March 2011. A small, heat-integrated ammonia cracking system that uses solid ammonia storage (metal ammine salts) to make hydrogen for fuel cells that work at low temperatures. The solid cartridge gives off ammonia, which is then broken down by heat in a “jacket-cracker” reactor. The inner chamber (Pt/Al2O3) burns NH3 or recycled H2 to make heat, and the outer chamber (Ru/Al2O3) breaks down NH3 into H2 and N2. A heat-recovery jacket warms the ammonia feed and returns excess heat to the storage module. This makes the system work better. PEM fuel cells require an NH3 absorber to purify the gas stream, and dual-cartridge reactor modules enable continuous operation. The new technology is not about new catalyst materials; it is about combining reactors and controlling heat. This enables safe and efficient hydrogen production from solid ammonia [51].
CN111957270A, filed in September 2020, is the second-most-cited-by-patent (47 citations). This patent describes a whole system for making hydrogen by breaking down ammonia. It is intended for use at hydrogen refueling stations. The system utilizes traditional catalysts composed of Ni, Fe, or Ru to decompose ammonia through heat. This process produces a hydrogen-nitrogen mixture, which is then purified in three steps: ammonia adsorption, pressure-swing adsorption (PSA), and membrane separation. One of the most significant new features is its ability to operate independently. A catalytic combustion unit utilizes some of the product gas to generate all the heat required for ammonia cracking. It does not require any outside fuel. The patent also reduces energy consumption by using a two-stage heat-exchange process, in which hot combustion exhaust heats the incoming ammonia feed and regenerates the ammonia adsorption bed. The cleaned hydrogen is stored in tanks that can withstand both low and high pressures. This allows it to fill with hydrogen at pressures between 350 and 700 bar. Most of the patent is about integrating systems at the system level. It utilizes regular catalysts to enhance hydrogen production efficiency, improve heat recovery, and facilitate easier use at refueling stations. This makes it a good design guide for making hydrogen in a decentralized way using ammonia [52].
The most recent invention to be filed is CN119015872A. There is a small ammonia-to-hydrogen system that uses catalytic combustion to convert ammonia. It features a dual-zone catalytic burner (utilizing Pd/Pt for ignition and Cu/Ni for sustained combustion), a heat exchanger, and a Fe-based ammonia-cracking reactor. After startup, the system heats itself and does not require any additional fuel, as some of the hydrogen it produces is used as burner fuel. The countercurrent heat exchange makes the system more thermally efficient, and the waste heat recovery warms the incoming ammonia. It operates at approximately 550 °C and converts approximately 99% of the ammonia. Its lightweight, efficient, and easy-to-monitor design makes it suitable for on-site or on-the-go hydrogen generation [53].
  • With ammonia-decomposed and ammonia-oxidizing catalysts
JP2010180098A was the first patent filed in February 2009 and has been cited the most (5 citations). This patent describes a hybrid autothermal ammonia-to-hydrogen generator that uses carbon nanotubes to combine partial oxidation and catalytic decomposition. The carbon nanotubes (CNTs) have distinct areas for Pt oxidation and for Ru/Rh/Ni/Fe decomposition catalysts, enabling H2 production without external assistance. The design eliminates the need for external heating and enhances system efficiency by utilizing nanoscale thermal conduction. This example of autothermal thermal catalytic ammonia decomposition using bifunctional nanostructured catalysts is meant for use in automotive fuel cells or ammonia engines [54].
In November 2009, WO2010/058807A1 was filed. It has the most extended families (10 extended families), with family jurisdictions in Japan, China, Europe, the United States, and WIPO. It has the most forward citations (15 citations). This patent proposes an ammonia engine system that incorporates a Pt-based ammonia-oxidizing unit positioned between the engine and the ammonia cracker to increase the exhaust temperature when the engine is operating at a low load. The exhaust becomes hotter, then enters a plate-type ammonia cracker (Ru/Rh/Ni/Fe) that breaks NH3 into H2 and N2. This means that hydrogen is always available, even when the engine exhaust is too cold to ignite. This is a system-level, hybrid thermal-catalytic architecture for converting NH3 to H2 in an ammonia engine. It uses exhaust to heat the engine, oxidation to aid it, and optional electric heaters to further aid it [55].
KR20240010242A is the most recent application filed by Hydrochem Inc. in July 2022. The present invention provides a process for producing high-purity hydrogen from ammonia through a dual-step selective oxidation process. Ammonia is initially thermocatalytically decomposed (500–650 °C) over Ru-, Co-, Ni-, or Mo-containing catalysts. Residual NH3 in the product stream is next a) selectively oxidized at 300–650 °C over an Fe- or Cu–zeolite catalyst to form N2 + H2O (≫95% selectivity, while NOx production < 150 ppm). Stable full-scale NH3 removal is cost-effectively achieved in concurrent operation with controlled O2 injection and without power-consuming adsorbers; supplied NH3 (1–3 times the stoichiometric amount) is available. The sequence may include a TSA/PSA cleanup for ultra-pure hydrogen (<1 ppb NH3). In contrast to typical adsorption–desorption cycling, this strategy can minimize energy loss. It may therefore offer an alternative approach to achieving efficient, low-emissions ammonia-based hydrogen production and purification [56].
  • With ammonia-decomposed and electrode-based catalysts
JP2011204418A was filed in March 2010. This invention concerns solid oxide fuel cells (SOFCs) that operate on ammonia but experience startup issues. When they shut down, the Ni/ceria/zirconia anode oxidizes and cannot break down NH3, allowing NH3/NOx to escape. The patent adds a step before the primary process where a hot, H2-rich reformate is sent to the anode to (1) heat it to the right temperature and (2) reduce it back to its metallic, NH3-decomposing state. The anode exhaust is burned simultaneously, and the resulting hot gas is directed to the air side. This prevents the anode and cathode from overheating and causing thermal stress. After that, the system switches to ammonia and recycles the anode exhaust to eliminate any remaining NH3. This keeps NH3 in the vent at ≤5 ppm, prolonging stack life [57].
The most recent one is CN120332944A, dated March 2025. A solar thermal energy (STE)-H2 refueling station of an ammonia-decomposition-integrated type (solar hydrogen pilot system) and high-temperature solid oxide electrolysis cell (SOEC) water electrolysis are detailed. Using solar panels, a steam turbine, and a molten salt storage system, the SOEC can be fed with high-quality heat and power. The hot SOEC/anode/burner gases are then passed through a reactor, in which the heating-gas line is thermally connected to a catalytic NH3-decomposition line that includes an ammonia-decomposition catalyst. The cracked gas is cooled, passed through one to two adsorption stages to remove any unconverted NH3 and N2, then compressed, cooled, and dispensed. The overall energy-use efficiency of the system is enhanced, and the capability to refuel even when the sun is not shining is maintained by allowing solar heat, BN exhaust, SOEC waste heat, and NH3 cracking to share a single temperature ladder [58].
  • With ammonia-decomposed and membrane-separation catalysts
WO2008/002593A2 is the first filed invention in June 2007, with the highest number of extended families (10 extended families). For this family, jurisdiction was found in between the European Patent Office (EPO), Japan, Canada, Australia, the United States of America (USA), China, and WIPO. Disclosed is a system of a hydrogen fueling station constructed to produce hydrogen at point-of-use by autothermal catalytic cracking of ammonia using Ni-, Ru- or Pt-based catalysts between 500 and 800 °C wherein liquid NH3 is stored, vapourized and decomposed in the presence of the catalyst, undissociated NH3 being removed by cryogenic, adsorptive or membrane separation, filtered through appropriate filters so as not to clog said storage tank outlet valve and sent back to said storage tank for later use. Clean hydrogen is compressed and used as a vehicle fuel. The novelty of this work is combining ammonia storage, catalytic cracking, purification, and compression at a fueling station to produce clean, auto-produced H2, thereby enabling a more safety-decentralized approach (and reducing the demand for transported hydrogen) [59].
The most cited-patent (5 citations) is US10906804B2, filed in August 2018 and assigned to the Gas Technology Institute and the University of South Carolina. This ARPA-E–funded patent features a membrane-integrated ammonia cracker that combines a Ru-based NH3 decomposition catalyst, an H2-selective ceramic hollow fiber membrane for continuous removal of the H2 product to achieve >99% conversion at T = 350–450 °C and p = 10–15 bar, and an in situ catalytic burner using H2 as fuel to provide heat for the endothermic process. The small reactor supplies PEM-grade, high-purity H2 (30bar) at ≈88% efficiency and $4 kg−1 cost, representing a thermal catalytic, membrane-assisted breakthrough at the systems level for distributed H2 generation [60].
US2020/0269208A1, filed in February 2020, has the highest cited-by-patent (23 citations). The invention also provides a low-temperature catalytic membrane reactor for simultaneously decomposing ammonia and purifying hydrogen streams. The reactor consists of a porous yttria-stabilized zirconia (YSZ) tube with a Ru catalyst loaded on its exterior mesoporous layer, and selective H2 permeation through a thin Pd membrane. In this study, internal surface cesium doping improves N–N desorption, facilitating effective NH3 cracking at ~400 °C and 1–5 bar flow rates without a sweep gas. It enables complete conversion of NH3 (10× lower catalyst use) and >30 mol m−3 s−1 H2 productivity with superior H2 purity for PEM fuel cells. It is an exemplar of a novel thermal catalytic, membrane-assisted concept for ammonia-derived H2 production with compactness and high efficiency [61].
CN113604813A is the most recent patent, filed in August 2021, and has been cited by 17 patents. It discloses an integrated NH3-to-H2 compact system that includes NH3 vaporization, high-temperature electric/combustion-assisted decomposition, and low-temperature gas purification in a single vessel. Liquid ammonia is gasified and decomposed at >800 °C by the Ni–Cr electric heater, and then a H2-combustion tube with a catalyst provides additional heat. The resultant mixed gases are then conducted through a Z-shaped Pd/molecular-sieve separator, cooled by a closed hot–cold circulation loop, and released into high-purity hydrogen and nitrogen tanks. The patent is related to thermal design as well as the integration of the purification efficiency, and is not focused on a new NH3-cracking catalyst [62].
  • With ammonia-decomposed, ammonia-combusted, and ammonia-oxidizing catalysts
That most-cited-by-patent (52 citations) was invented by Goetsch, Duane A., and Schmit, Steve J. in July 2004. US2005/0037244A1 describes an autothermal process for cracking ammonia, where a small amount of the product hydrogen is burned—sometimes with a small quantity of fuel and/or ammonia—within or adjacent to the reactor to provide endothermic heat. This avoids the necessity for external furnaces, and small, short-contact-time units (GHSV ≈ 3 × 104–106 h−1) can operate in the range of 700–1000 °C. The patent presents three heat-integrated schemes: a monochamber configuration with radiative shields, a dual-compartment unit that heats an inner cracker via a wall-mounted outer combustor, and a coaxial two-pass reactor that heats the feed with hot effluent. Catalysts Ru, Ni, Fe, and Pt on ceramic or FeCrAl monoliths with a stabilized oxide phase of γ-Al2O3 produce a CO-free H2/N2/H2O stream for use in fuel cells, where air serves as the oxidant and hydrogen is optionally recycled [63].
EP4417572A1 optimizes US2005/0037244A1 by alternating between a single Ru-based half-catalytic combustion bed and NH3 decomposition, with oxygen fed through multi-perforated in-bed distributors to maintain uniform temperature throughout and operate the bed at 600–800 °C (most preferably about 600–700 °C). The controlled co-feeding of canned water (0.2–1.2 kg H2O per kg NH3) can act as a heat sink, enabling operation at 20–40 bar without equilibrium penalties. Downstream, PSA produces pressurized H2, and an adiabatic catalytic boiler oxidizes the PSA offgas to create fuel vaporization and preheat the NH3/H2O feed with heat recovery. Overall, the new design delivers a small-volume, low-NOx pressurized H2 plant with reduced O2 consumption and increased H2 yield compared to flame-assisted Ni-based systems [64].
US2012/0015802A1, filed in March 2010, has the most extended families (23 extended families) with jurisdictions in the US, Korea, Europe, China, and WIPO, and the highest cited-patent (8 citations). An autothermal ammonia-to-hydrogen system is introduced in the present patent, in which both ammonia combustion and decomposition catalysts are simultaneously located inside a reactor. A small portion of ammonia is catalytically oxidized over Mn–Ce/Mn–La oxides to supply heat, and the decomposition of ammonia over the Fe-based material transforms into that over Co-, Ni-, or Mo-containing materials during 300–1100 °C, which is driven by the generated heat. The dual-function catalyst design developed in this study enables standalone hydrogen production without external heating for high-performance non-precious metal catalysts, thereby significantly improving overall efficiency, cost-effectiveness, and thermal stability for portable to industrial hydrogen generation [65].
  • With ammonia-decomposed, electrode-based, and membrane-separation catalysts
CN117693608A is the only invention so far to have 7 families of extension, covering Europe, Japan, Korea, the US, China, GB, and WIPO. shows an all-solid-state membrane–reactor system for hydrogen generation from NH3, where porous Ni–BCZY cermet electrodes thermally decompose NH3 and dense BCZY protonic-conductor membrane extracts protons, compresses H2 electrochemically, and supplies external Joule heat to sustain the endothermic reaction. Developed for efficient operation between 600 and 650 °C, the process achieves high NH3 conversion without downstream PSA or mechanical compressors. The primary catalyst is a Ni-based ammonia-decomposition electrode that also serves as the proton-conducting structure. The unique contribution is a compact, self-heated reactor that combines a catalyst, an electrode, and a proton-conductive membrane for reaction, separation, compression, and heat-management in an efficient system that continuously produces high-purity pressurized hydrogen from a variety of sources: either anhydrous ammonia or traditional dilute aqueous ammonia, with improved overall performance [66].
  • With ammonia-decomposed, ammonia-combusted, and membrane-separation catalysts
EP1728290B1 is the earliest patent filed in March 2005 and granted in December 2008. It has family jurisdictions from 9 countries: Germany, China, Spain, the United States, Europe, Austria, Japan, Poland, and WIPO. The invention provides an integrated power-generation system that employs a metal–ammine salt as a reversible solid ammonium storage and utilizes either direct (Ammonia-fed) ammonia fuel cells or a thermal catalytic ammonia decomposition reactor for hydrogen fuel cells. Metal–ammine complexes (e.g., Mg(NH3)6Cl2, Li(NH3)4Cl) have been discovered that store 20–60 wt% ammonia and release it safely at moderate temperatures, with a significantly higher volumetric density and much lower vapor pressure than liquid ammonia. b NH3 is applied either as such or it is decomposed over transition-metal catalysts (Co3Mo3N, Ru, Co, Ni, and Fe particles on carriers). Residual NH3 is extracted for PEM fuel cells by acid scrubbers or MaXz absorbents, or Pd hydrogen selective membranes (NH3 < 10 ppm). The patent also shows microfabricated Ru or Ba-Ru/Al2O3 reactors with approximately 98% conversion at 400 °C, enabling compact NH3-to-H2 systems for MEMS. In general, the invention provides a system-level solution that integrates high-density solid NH3 storage, catalytic cracking, separation, and a fuel cell into a single compact power unit [67].
EP3607182B1 has the highest number of extended families (13 extended families) covering 6 jurisdictions: Brazil, the US, Japan, Europe, China, and Korea. A vehicle-integrated NH3-to-H2 generation system is described in this patent, wherein ammonia is phase-separated from an NH3/organic-solvent solution and catalytically decomposed (Ru/silica) to form H2, which may then be further dehydrogenated, for example, through a Pd membrane. Thus, the obtained H2 is injected into the diesel exhaust in a pulsed manner for enhancing cold-start oxidation (CO/HC/NO) and regenerating diesel oxidation catalysts (DOC), as well as ammonia injection for selective catalytic (SCR) NOx reduction [68].
The most recent invention, US11084012B2, filed in 2020, is the highest cited-by-patent (27 citations) and cited-patent (9 citations). A two-stage ammonia decomposition process is disclosed in this patent, utilizing Ni- and Ru-based catalysts to achieve NH3 conversion greater than 99.9% and high-purity H2. A porous burner provides heat supply, and recuperators and coils are used to recover heat for preheating ammonia. Further purification is achieved through optional PSA and membrane units for hydrogen, as well as off-gas heat recycling with fuel-cell integration. The arrangement provides a small-scale, low-energy, and high-purity hydrogen production process that is particularly suited for onsite or fuel cell applications [69].

4.2.2. Thermal Decomposition

  • No catalyst
Since no catalyst is involved, the conventional thermal breakdown of ammonia typically requires very high working temperatures to achieve adequate conversion. Nevertheless, the process transitions to thermal catalytic decomposition when catalysts are added, as they efficiently lower the activation energy, enabling hydrogen synthesis at lower temperatures.
The earliest innovation, KR20080008657A, was created by Kang Deuk Joo and filed in July 2006. This patent covers a continuous hydrogen extraction method that produces high-purity hydrogen for the manufacture of carbon nanotubes (CNTs) using anhydrous ammonia as a feedstock. In a high-temperature furnace (~1200 °C), ammonia from a storage tank is divided among several SUS310S reaction tubes. There, it undergoes non-catalytic thermal breakdown to produce a mixture rich in hydrogen (H2, N2, residual NH3, and H2O). To remove moisture, the hot gas is first cooled in a heat exchanger that also preheats the incoming NH3. After that, it is further chilled and transferred to a temperature swing adsorption (TSA) unit filled with zeolite 3A. In order to produce hydrogen with a purity of up to 99.99%, the dried mixture is compressed, chilled once more, and then fed into a multi-column pressure swing adsorption (PSA) system, which contains Li-LSX (for N2), zeolite 13X (for trace NH3), and alumina (for residual H2O). Three PSA columns are cycled through adsorption, depressurization, purge/cleaning, and depressurization stages to assure continuous hydrogen production, and off-gas from TSA regeneration is securely burned. The unit can follow the fluctuating hydrogen requirement of a CNT CVD facility since the NH3 feed valve automatically modifies flow based on system pressure [70].
WO2022/126248A1 was filed in December 2021. It has the most extended families (9 extended families) with four separate family jurisdictions: Europe, Canada, the United States, and WIPO. This patent proposes an engine-integrated, non-catalytic route to ammonia-to-hydrogen conversion. A shock-wave reformer utilizes a slight bleed of hot, high-pressure combustor gas to compress and heat preheated ammonia within rotating channels, causing it to crack into H2 + N2 within ~1 ms partially. This NH3-H2 dual fuel is immediately fed back to the turbomachinery combustor. Because it reuses burner exhaust as the heat/pressure source, it eliminates the requirement for an external heater or catalyst, while also solving two aviation problems: (i) Ammonia alone has low flame speed and high NOx. (ii) Hydrogen alone is bulky to store. An on-board, shock-cracked NH3-H2 blend provides a zero-carbon aviation fuel with higher ignition stability [71].
JP2022145242A is the second most recent innovation, filed in March 2021 and granted in October 2022. It discusses a carbon-free burner system that uses hydrogen-rich pyrolysis gas generated by the thermal decomposition of ammonia as a clean fuel to make inorganic spherical particles. The system thermally decomposes ammonia at 150–400 °C using a heating unit (which includes a heat exchanger and an electric heater) to produce hydrogen and nitrogen, which are then combined with oxygen in a multi-tube oxygen burner. This technology replaces traditional hydrocarbon fuels (e.g., LPG, methane), resulting in higher flame temperatures and more circular particles while reducing CO2 and soot emissions [72].
More recently, US20250197205A1, filed in September 2024 by Hamm Swook and Jang Hyungsik, introduces a laser-driven, non-catalytic hydrogen production system that decomposes ammonia via targeted photothermal excitation. In one embodiment, near-infrared laser light (1512–1532 nm) directly heats and dissociates NH3 molecules at the focal zone. In another, an Nd: YAG or Yb: YAG-based inlet reaches temperatures above 450 °C at 6–9 bar, enabling continuous ammonia decomposition as the gas flows through a compact “T”-shaped reactor. The separated H2 and N2 streams exit through dedicated outlets. This laser-assisted photothermal process eliminates the need for catalysts and CO2 emissions, offering a compact and modular alternative ideal for mobile or small-scale continuous hydrogen generation. The patent is registered in Korea and the United States [73].

4.2.3. Electrochemical Decomposition

  • With electrode-based catalysts
The oldest filing among the selected patents is JP2005327638A (May 2004), which has been forward cited by 6 patents. The proposed device for PEM fuel-cell systems removes and recovers trace NH3 from hydrogen-rich reformate using water. The ammoniated water is subsequently electrolyzed between stainless-steel/Ti-plated mesh electrodes to decompose NH3 into H2 and N2. The generated gases are blended back into the cleansed reformate, delivering more hydrogen while producing no new waste streams. By merging washing and electrolysis in a single tank and removing ion-exchange resins, the design minimizes footprint, capital/operating expenses, and regeneration waste. An optional solar cell can power the DC supply, substantially lowering energy use. The patent does not claim a specific catalyst or membrane; its uniqueness rests in process integration and practical system engineering, not in catalytic materials [74].
EP4570949A1, filed in November 2024, has the most cited-patent (5 citations) and extended families (3 extended families) in the highest jurisdictions: the United States, Europe, and China. This patent describes a catalyst-free, non-thermal electrochemical reactor that produces hydrogen directly from liquid ammonia for use aboard aircraft—a cylindrical chamber with the chamber walls serving as the anodes and a central rod serving as the cathode. Liquid NH3 is injected tangentially, creating a helical flow. An electric field converts ammonia into H2 and nitrogenous byproducts, which escape through separate outlets. Ultrasonic transducers remove gas bubbles from electrodes, whereas permanent magnets use the Lorentz force phenomenon to increase reaction speeds. Multiple reactors can be connected in sequence within a cooling structure, with the nitrogenous outflow of one stage serving as the NH3 feed for the next. This design provides a small, cryogen-free hydrogen source that is ideal for aircraft propulsion and other transportable applications [75].
CN119956399A, filed in January 2025, is the most recent innovation, providing a high-temperature, electrode-based cathode catalyst for solid oxide ammonia electrolysis to generate hydrogen. The authors created a citrate-EDTA sol–gel to create a Co-doped double perovskite Sr2Fe1.5−xCoxMo0.5O6 (x = 0–0.3). During electrolysis in a reducing atmosphere, the material self-reconstructs into a layered perovskite, Sr3Fe2−x−γCoxMoγO7, and precipitates fine Co-Fe alloy particles on its surface. The reconstructed interface provides more active sites, oxygen vacancies, and better electron/ion transport, resulting in a higher ammonia-electrolysis current density than commercial Lanthanum Strontium Manganite (LSM) and Lanthanum Strontium Cobalt Ferrite (LSCF) cathodes at 750 °C (the best composition, Sr2Fe1.3Co0.2Mo0.5O6, reaches ≈1450 mA cm−2 at 0.6 V vs. 573–825 mA cm−2 for LSM/LSCF). The idea is intended for SOEC/SOAE stacks that employ NH3 as anode fuel yet require high-rate H2 evolution at the cathode [76].
  • With ammonia-decomposed and electrode-based catalyst
CN116479465A, filed in May 2023, is the most cited-patent (8 citations) and describes a catalyst-level solution for room-temperature electrocatalytic breakdown of liquid ammonia/ammonium-salt mixtures. The process of manufacturing single-atom nanoparticle (SAs-NPs) composites of Ru, Rh, or Ir on carbon-nitride nanosheets using freeze-drying and high-temperature inert calcination (750–850 °C). When coated on conductive substrates and tested in 1 M NH4PF6 at RT (−0.3 to −1.4 V vs. Ag/AgNO3), the catalyst produces H2 and N2 at a H2:N2 ratio close to 3:1. It maintains activity for ~200 h, while also avoiding the Pt-anode corrosion/dissolution problem that limits existing RT liquid-ammonia electrolysis systems [77].
CN119506969A is the most recent invention submitted in November 2024. It describes an improved Ru catalyst for electrochemical ammonia breakdown to hydrogen. The solution addresses the issue that Ru, while very active for NH3 → N2 + 3H2, sinters under “electrothermal” conditions, thereby decreasing activity over time. The patent proposes making Ru particles from RuCl3 and wrapping them with an organic-inorganic shell: polyimide (base), a N-acetyl amino acid (N-acetylcysteine or N-acetylglycine) as an adhesion/compatibility layer, and nano SiO2, TiO2, and Al2O3 as a high-Tm “skeleton.” After drying (70 °C) and calcining in inert gas at 450–550 °C, this shell keeps Ru in place, avoids agglomeration, and still allows for NH3 breakdown. Electrochemical experiments (1 M KOH, 10,000 CV cycles) demonstrate lower overpotential and degradation rate than unprotected Ru, making the catalyst better suited for renewable-powered, stop-start electrochemical NH3 → H2 systems with extended lifespan and low maintenance [78].
  • With ammonia-oxidizing and electrode-based catalyst
WO2009/024185A1, filed in August 2007, is the most highly cited-patent (12 citations). It introduces a low-temperature, on-board ammonia electrolyzer that uses an anion-exchange membrane to generate a 3:1 H2:N2 mixture from an alkaline NH3 solution for enhanced engine combustion. The device operates at ~0.5–0.6 V and exhibits greater than 100% Faradaic efficiency. It uses similar bifunctional Ni-based Pt/Ir/Rh-modified electrodes that invert polarity every 60–3000 s to self-clean and maintain continuous H2 output. Classified as electrochemical (AEM-based) ammonia electrolysis, its novelty principally rests in the system design and operation, with secondary advances in catalysts [79].
GB2571413A, filed in December 2018, is the second-earliest invention, with the greatest 7 backward citations; it has 4 extended families, with jurisdiction in Germany. This patent offers a bio-electrochemical route for hydrogen synthesis that leverages waste-derived ammonia as a renewable feedstock. The process begins with the enzymatic conversion of urea into ammonia using urease generated from plants or bacteria, followed by ammonia stripping using alkali treatment to extract ammonia gas from cattle excreta, human sewage, and food waste. The recovered ammonia is then electrochemically degraded into hydrogen and nitrogen in an electrolyzer employing electrode-based catalysts such as thermally decomposed iridium oxide (IrO2) for the anode and nickel-based materials for the cathode. The hydrogen produced can be immediately used in small fuel cells for combined heat and power generation or supplied to national energy networks [80]. Overall, the innovation presents an integrated, sustainable waste-to-hydrogen system that combines agricultural and municipal waste management with renewable hydrogen generation, reducing environmental impact while avoiding dependence on fossil-fuel-based reforming.
KR102776600B1 was filed in October 2022, and the second latest granted in March 2025. The proposed graded ammonia-electrolysis anode is suitable for alkaline NH3 electrolysis. The electrode stacks an ammonia-diffusion layer with a high-density PGM catalyst layer (2–8 mg cm−2) and a low-density PGM layer (0.5–3 mg cm−2) made from Pt, Ir, Ru, Pd, or their alloys. This graded structure maintains NH3 supply channels, ensures sufficient active sites, and prevents the cell from straying towards the oxygen-evolution reaction at high current density, a standard failure mode in NH3 electrolysis. In single-cell testing (1 M NH3 + 1 M KOH, 100 mA cm−2), the composite electrode (1:4 low-density: high-density) maintained ≈95% of its initial H2 production even after 30–60 min, while single-layer electrodes (only low-density or only high-density) declined to 50–60% or lower [81].
KR20250101330A, filed in December 2023 and most recently granted in August 2025, describes a low-cost, high-efficiency method to Ni-based electrocatalysts for ammonia electrolysis. The method employs a liquid plasma reactor (Ni and Cu electrodes, 3 mM KCl) with low voltage pulses (350–450 V) to produce nanostructured nickel precipitates, which, after filtration/drying, Nafion-based ink preparation, ultrasonic dispersion, and electrochemical activation (CV in 0.5 M KOH), convert to NiOOH/NiCuOOH—the active ammonia-oxidation electrocatalysts. During operation, NH3 is electro-oxidized to N2 at the anode, and H2 evolves at the cathode, delivering hydrogen without the use of thermal crackers or precious metals. The primary advances are plasma-assisted catalyst synthesis under mild conditions and a non-precious-metal Ni/NiCu AOR system, developed for efficient, scalable hydrogen production from ammonia via electrochemistry [82].
CN119843312A, filed in January 2025, is the most recent invention. It shows a nickel-copper alloy nanoparticle electrocatalyst for effective hydrogen generation via ammonia electrooxidation. The Ni-Cu nanoparticles (5–7 nm, spherical) are manufactured by a one-pot oleylamine-assisted thermal reduction under nitrogen using tri-n-octylphosphine as a deoxygenating agent, yielding homogenous NixCuγ nanoparticles with adjustable ratios (Ni0.8Cu0.2–Ni0.5Cu0.5). These are then placed onto a glassy carbon electrode, along with carbon black and Nafion, to create an active electrode catalyst. In an alkaline electrolyte (1 M KOH + NH3), the alloy surface generates active NiOOH/Cu species, enabling rapid ammonia electrooxidation and hydrogen evolution at lower overpotentials and with increased stability. The bimetallic catalyst outperforms pure Ni or Cu nanoparticles in terms of current density, kinetics, and durability, making it a viable low-cost electrocatalyst for producing carbon-free hydrogen from ammonia [83].
  • With ammonia-decomposed, electrode-based, and ammonia-oxidizing catalyst
The earliest invention, as well as the highly cited-patent (4 citations), CN106319555A, was filed in July 2015 and granted in June 2018. A low-temperature, pressure-resistant electrochemical method that directly electrolyzes anhydrous, oxygen-free liquid ammonia (with 1 mol L−1 NH4X as the supporting electrolyte) on Pt electrodes at 20 °C and 120 mA cm−2 to produce H2 and N2 in a 3:1 ratio, achieving a current efficiency of up to ~94%. This eliminates the need for 400–600 °C reactors and noble-metal thermal catalysts typically required for NH3 cracking, demonstrating that ammonia’s high hydrogen density can be accessed electrochemically to provide COx-free hydrogen [84].
The fourth-most recent inventions applied by Huaneng Clean Energy Research Institute in April 2018 are CN108360011A and CN208328127U. The low-energy ammonia electrolysis system in CN108360011A utilizes Ni–Co–Fe/Ni–Rh alloy electrodes in an alkaline NH3–KOH electrolyte at ambient temperature and a low voltage of 0.8 V to produce high-purity hydrogen (99.9%). An integrated, clean, and renewable method for using green hydrogen is enabled by the direct supply of hydrogen to a coal liquefaction process. In line with the objectives of sustainable hydrogen production, the invention simultaneously treats wastewater containing ammonia and reduces the energy requirements of traditional water electrolysis [85].
Building upon this invention, CN208328127U, granted in January 2019, translates the same principle into a practical system design, detailing component layout, electrode composition, and process flow. In short, the former defines the process innovation, and the latter protects the engineering embodiment of that process [86].
The third most recent innovation, CN208183081U, was filed in April 2018 and granted in December 2018. The system is a combined ammonia electrolysis and wastewater treatment system that produces high-purity hydrogen (99.999%) for fuel cell vehicles from ammonia nitrogen wastewater. Using a Ni–Rh nanomaterial anode and a Ni–Co–Fe cathode, the technique generates clean hydrogen using renewable electricity while simultaneously removing up to 50% of the ammonia at room temperature, and 0.6 V. This is an electrochemical innovation at the system level that connects sustainable hydrogen mobility and environmental remediation [87].
The second most recent invention, CN210736904U, was filed in June 2019 and granted in June 2020. The solid-oxide electrolytic ammonia-to-hydrogen system receives liquid NH3 from a storage tank, vaporizes and warms it through heat exchangers, and then sends it to an SOEC where it electrochemically oxidizes to N2 at the anode and produces H2 at the cathode, which is then collected after drying. Without the need for membrane H2 separators or PSA, the system directly produces high-purity H2 (≥99.99%) with a high yield (>93%) since N2 and H2 are generated on opposite sides of a thick electrolyte. Instead of using a new catalyst, the invention focuses on system integration (recycling anode off-gas, anode/cathode gas channels, two heat exchangers, and an optional expander). It aims to use less power than water electrolysis by using the chemical energy of NH3 during electrolysis [88].
The most recent innovation, CN115786967A, was filed in November 2022 and granted in May 2024. For use as a high-activity anode for ammonia electrolysis, it suggests a room-temperature electrosynthesis method for growing a bimetallic NiCu-NH2-BDC MOF layer directly on conductive substrates (Ni foam, SS mesh, and carbon cloth). The catalyst forms in situ as 2D petal-like sheets when a three-electrode setup is used and a potential of –1.5 V is applied for approximately 100 s in a solution containing Ni2+, Cu2+, NH2-BDC, and a surfactant/complexing agent. This results in a significantly higher NH3-oxidation current than (i) plain Ni foam, (ii) electroplated NiCu, and even (iii) hydrothermally made NiCu-NH2-BDC. The electrode operates in alkaline NH3 (pH 9–14) at only 0.5–0.7 V, explicitly targeting the current bottleneck in ammonia electrolysis: high anode overpotential. Because it is a catalyst-level (Ni–Cu MOF anode) + scalable, low-T electrosynthesis approach, the innovation is appropriate for large-scale, dispersed ammonia-to-hydrogen systems [89].
  • With ammonia-decomposed, electrode-based, and membrane-separation catalyst
The first invention to be filed was KR101340492B1 in September 2012. This invention presents a reversible solid oxide regenerative fuel cell (SORFC) system based on ammonia, intended for the storage and conversion of renewable energy. It works in two ways: ammonia is created from nitrogen and water using excess renewable electricity in the electrolysis mode, and electricity is produced by electrochemically breaking down the stored ammonia into hydrogen and nitrogen in the fuel cell mode. Solid oxide electrolytes with noble-metal or perovskite electrodes that act as ammonia-decomposing electrocatalysts are used in the system, which is controlled by an intelligent grid controller that automatically alternates between generation and storage in response to demand. This design, which is a system-level electrochemical breakthrough rather than a new catalyst discovery, enables a carbon-free, high-density, and economical ammonia–hydrogen energy cycle [90].
This family, CN116472365A, is highly extended families (10 extended families) and has jurisdiction in the US, Japan, China, Korea, Europe, and Saudi Arabia. This US-original invention, which was filed in July 2020 and again in China in 2021, presents an electrochemical process akin to a fuel cell that produces compressed, high-purity hydrogen straight from ammonia: In order to provide compression, purification, and production in a single step without the need for mechanical compressors or downstream separations, NH3 is electrocatalytically broken down at the anode over non-precious metal catalysts (Ni/Co/Fe/Ru) to N2, protons, and electrons. Protons then pass through a proton-conducting solid oxide membrane (doped barium cerate/zirconate) and recombine with electrons at the cathode to form H2 at a regulated pressure. The cell permits independent anode/cathode pressurization to adjust thermodynamics and reduce seal stresses, and the electrodes are standard porous composites (e.g., Ni–electrolyte anodes; LSCF/LSF/LSM perovskite cathodes). The outcome is a smaller, less expensive process that does not require external compression or precious metals, making electrochemical NH3-to-H2 conversion a viable choice for refueling stations and distributed hydrogen supply [91].
Filed in December 2021, AU2021/468503A1 also has a large number of extended families (10 extended families), with the most distinct family jurisdictions (7 jurisdictions) in the US, China, Korea, Japan, Australia, Europe, and WIPO (2023). This patent describes a solid-oxide electrochemical membrane reactor that uses no external electrical power to produce hydrogen from ammonia. Steam feeds the cathode, and ammonia or cracked ammonia feeds the anode. By transferring oxide ions and electrons, a co-doped ceria (CGO) mixed-conducting membrane facilitates hydrogen production at the cathode. Nickel-based cermet electrodes serve as both electrocatalysts and in situ ammonia-cracking catalysts, enabling the process to operate effectively without a H2/N2 separation step. A burner and heat exchanger are included in the system to recycle thermal energy from the anode exhaust, creating a high-efficiency, self-sustaining loop. All things considered, the invention combines electrochemical and catalytic processes to produce a small, carbon-free, power-free system for localized hydrogen synthesis from ammonia [92].
The most recent innovation, filed in October 2023, is WO2024/129246A1. The high-temperature electrochemical reactor proposed in this invention produces high-purity hydrogen in a single unit from ammonia (or NH3-cracked gas, comprising H2 and N2). A porous, mixed-conducting catalytic layer (Ni, Co, Ru, LST, and doped La-chromite) serves as the anode and can provide H species and crack NH3 in situ. Only hydrogen species can pass through a ceramic membrane that conducts both protons and electrons between the anode and cathode, keeping N2 and any leftover NH3 on the anode side. On the cathode, without a separate PSA or Pd membrane, the transported species recombine to produce ≈99.5% H2 at reduced pressure or vacuum (and optionally steam). This is similar to water electrolysis. The reactor can be planar or tubular, operate between 500 and 800 °C, and is not equipped with current collectors or interconnects [93].
  • With ammonia-oxidizing, electrode-based, and membrane-separation catalyst
The oldest invention, CN111321422A, was filed in April 2020 and granted in August 2021. It is the most cited-patent (5 citations) and the most cited-by-patent (6 citations). This patent describes a room-temperature electrochemical liquid-ammonia-to-hydrogen system that uses Pt/Ru/Ir or transition-metal-nitride electrocatalysts to split liquid NH3 containing ammonium salts into H2 and N2 at low overpotential. The mixed gas then passes through a condenser, a Pd-membrane purifier, and a secondary NH3 absorber to deliver fuel-cell-grade hydrogen while returning NH3 for recycling. By switching from high-temperature thermal NH3 cracking to modular, distributed, low-energy electrocatalytic NH3 decomposition, the patent contributes to the ammonia-to-hydrogen landscape by providing a route for on-site H2 supply (e.g., refueling stations, remote telecom, and cold regions) where NH3 serves as the transport/storage medium [94].
KR20230131747A (May 2022), with the highest 9 extended families, presents a compact electrochemical NH3-to-H2 stack that merges the electrodes, gas–liquid diffusion layers, and separator into a single “composite electrode-separator” to reduce ohmic loss and size. The system uses a bipolar membrane to separate a neutral catholyte and alkaline anolyte, producing H2 by HER when dissolved O2 is ≤12% and switching to ORR-dominant power generation when O2 increases. At >100 mA cm−2, it uses ammonia-water electrolysis to increase H2 generation. The stack employs standard Ni/Co/Fe/Cu and PGM catalysts on porous supports (e.g., Ni foam, Ti mesh), with its main innovation being oxygen-controlled mode switching and integrated hardware that enable operation in power-only, power-plus-hydrogen, or hydrogen-only modes without heat cracking [95].
The KR102602035B1 patent, filed in June 2023 and filed by the Korea Institute of Energy Technology, describes a solar-assisted non-aqueous photoelectrochemical cell that generates hydrogen from ammonia. Using acetonitrile and NaClO4 as the electrolyte, ammonia is oxidized at a BiVO4 photoanode under light to make N2 and protons, which are reduced at a Pt cathode (via Nafion membrane) to generate H2. At room temperature, the absence of water prevents side reactions, resulting in a Faradaic efficiency of approximately 89%. It is classified as electrochemical or photoelectrochemical ammonia oxidation, not thermal cracking [96].
KR20250077260A is the most recent invention filed in November 2023. An ammonia liquefaction and electrolysis system that produces high-purity hydrogen without requiring high-temperature cracking or external purification. Ammonia gas is liquefied with salts containing ammonium ions (e.g., NH4NO3, NH4PF6, NH4CF3SO3) and cycled through a flow-type electrolyzer equipped with a metal-oxide-treated anode, polymer electrolyte membrane, and cathode for hydrogen generation. The system converts NH3 to N2 at the anode and H2 at the cathode. The membrane prevents NH3 crossover [97].
  • With ammonia-decomposed, ammonia-oxidized, electrode-based, and membrane-separation catalyst
WO2022/010863A1 was filed in June 2021 and includes ten extended families from seven distinct family jurisdictions: the United States, Japan, China, Korea, Europe, Saudi Arabia, and WIPO. This invention shows an electrochemical ammonia-to-hydrogen system that creates and compresses hydrogen in a single proton-conducting fuel cell. Ammonia is fed to a metal-based decomposition anode (Ni, Co, Fe, Ru) and electrocatalytically oxidized to N2, protons, and electrons. Protons migrate across a solid proton-conducting electrolyte (BaCeO3/BaZrO3) and recombine at the cathode to produce high-purity, pressurized H2 without mechanical compressors. The process combines ammonia decomposition, hydrogen purification, and compression into a single cell, demonstrating an energy-efficient, integrated electrochemical pathway for on-demand hydrogen synthesis and storage from ammonia [98].
CN114104242A is the most recent invention filed in November 2021 and the most cited-patent (12 citations). A maritime hybrid power system that generates hydrogen electrochemically from liquid ammonia using an ammonia electrolyte battery. The cell uses Pt and Pt/C electrocatalysts in an alkaline electrolyte (KOH/NaOH) to oxidize NH3 to N2 at the anode and produce H2 at the cathode. The generated H2 is either pumped into a fuel cell or injected into a dual-fuel diesel engine to improve combustion. The system combines ammonia storage, buffering, electrolysis, and energy recovery in a single shipboard design, enabling on-demand hydrogen production and propulsion without the need for external storage or thermal-breaking catalysts [99].
  • With ammonia-decomposed, ammonia-combusted, ammonia-oxidized, and electrode-based catalysts
The National Engineering Research Center of Chemical Fertilizer Catalyst applied for both CN110295372A (invention) and CN210736903U (utility model), which were filed in June 2019. The most cited-patent (7 citations) is CN110295372A, which describes an integrated solid-electrolyte ammonia electrolysis hydrogen generation system comprising Ni-based anodes, perovskite-type cathodes, optional Ru/Ni ammonia-decomposition catalyst layers, and a heat-recycling combustion chamber. The invention patent CN110295372A offers a comprehensive theoretical and material framework, including oxygen-ion and proton-conductor configurations (YSZ, GDC, LSGM, BaCeO3, BaZrO3, etc.), full electrochemical reactions, and catalyst chemistry to achieve higher hydrogen purity and energy efficiency. The system feeds gaseous ammonia through a distribution chamber, preheats air and steam with waste heat, and electrochemically splits ammonia into nitrogen (at the anode) and high-purity hydrogen (at the cathode). Unreacted ammonia is directed to a catalytic or porous-media burner for complete conversion [100].
Meanwhile, the utility model CN210736903U focuses on engineering optimization, fine-tuning the mechanical layout, preheating channels, and energy recovery design to improve system functionality. It arranges several solid-oxide electrolysis cells in a modular architecture that includes airflow and steam preheating channels, optional Ru/Ni catalytic pre-cracking layers, and dual heat exchangers to maximize heat consumption. These two patents offer a technology combination that bridges conceptual electrochemical innovation and practical device engineering, showcasing China’s evolution from fundamental solid-electrolyte research to scalable, integrated ammonia-to-hydrogen systems for sustainable energy generation [101].

4.2.4. Photo-Catalytic Decomposition

  • With ammonia-decomposing catalysts
JP2009067650A is the first invention filed in September 2007 by Morikawa Shigeru and Ichimura Naoya. It has the highest cited-by-patent (4 citations). This patent describes a light-assisted catalytic ammonia decomposition system that produces hydrogen via photocatalytic and catalytic synergy. The process employs LEDs or laser light to irradiate a catalyst surface, increasing decomposition efficiency at lower temperatures. The system incorporates an ammonia-powered primary battery to power the light source, resulting in a compact, lightweight, and self-sustaining hydrogen generator suitable for vehicles or portable devices. It is a hybrid photocatalytic-catalytic system-level innovation for efficient, low-emission hydrogen production from ammonia [102].
CN116099531A has the highest cited-patent (7 citations) applied by Nanjing University of Technology. This patent discloses a light-driven ammonia-to-hydrogen route using γ-Al2O3 loaded with ultra-dispersed metal nanoclusters (mainly Ru, also Ni or Au), under a 300 W Xe lamp (0.7–1.3 W cm−2), dry NH3 in a closed reactor is fully decomposed to H2 at normal pressure without external heating or high pressure, because the nanoclusters generate hot carriers and activate NH3 on the adsorbing γ-Al2O3 surface. The optimal catalyst is Ru/γ-Al2O3 at 5 wt%, achieving 100% conversion in ~15 min and remaining stable for up to 120 h. The invention, therefore, shifts NH3 cracking from high-temperature thermal catalysis to a photocatalytic, low-energy pathway, making it a catalyst-level advance relevant to solar-assisted NH3-to-H2 systems [103].
CN120306011A is the latest invention, filed in June 2025 and applied by the University of Nankai. This patent discloses a Z-type heterojunction photocatalyst (Co–CdS QDs/MIL) designed for photocatalytic ammonia decomposition to hydrogen. The catalyst is fabricated by combining Co–CdS quantum dots with an MIL-53(Al) framework through an N–Co–S electron bridge, forming a stable heterojunction via hydrothermal treatment. This structure enhances charge transfer, improves redox potential, and prevents electron–hole recombination. As a result, it achieves efficient solar-driven NH3 decomposition at room temperature (25 °C) with a hydrogen production rate of 18 μmol·g−1·s−1, without external heating or noble metals [104].

4.2.5. Photo-Based/Photodissociation Decomposition

CA2403738C and CA2403741C are the earliest inventions in this category, both filed in September 2002 and invented by Sunatori Go Simon.
CA2403741C patent describes a fuel-cell vehicle using an ultraviolet ammonia cracker that decomposes gaseous ammonia via UV photodissociation to produce hydrogen and nitrogen. The hydrogen feeds a fuel-cell stack (PEMFC, AFC, or DAFC) for electric propulsion. The design includes membrane-based gas purification and can integrate secondary energy storage (e.g., batteries or ultracapacitors). It is a non-catalytic, photochemical system-level innovation that offers a compact, clean onboard hydrogen generation solution for ammonia-fueled vehicles [105].
Meanwhile, CA2403738C patent introduces a photo-based (VUV electromagnetic) ammonia decomposition system for hydrogen generation. The invention employs non-thermal, non-catalytic photodissociation, in which gaseous NH3 is directly split into N2 and H2 (2NH3 → N2 + 3H2) using vacuum-ultraviolet (VUV, <254 nm) radiation from dielectric barrier discharge (DBD), excimer, or UV-LED light sources. Liquid anhydrous ammonia is stored under pressure, then vaporized and passed through a UV-transparent dissociation chamber, where electromagnetic radiation dissociates the gas. Optional modules remove residual NH3 or N2 to purify the hydrogen before it enters a fuel cell. This photo-based, catalyst-free hydrogen generator offers a compact and low-carbon alternative to conventional high-temperature catalytic crackers, highlighting ammonia’s advantages as a safe, high-density hydrogen carrier for portable and vehicle fuel-cell systems [106].

4.2.6. Plasma-Catalytic Decomposition

  • With ammonia-decomposing catalysts
CN114294130A is the earliest innovation submitted in February 2022 and the most cited-by-patent (6 citations) held by the University of Shandong. A plasma-based integrated system that combines dielectric barrier discharge (DBD) plasma with non-noble metal catalysts (Fe, Ni, Co, and Mn) to simultaneously decompose and ignite ammonia. Using a multi-frequency power supply, low-frequency plasma converts ammonia to hydrogen and nitrogen, while high-frequency plasma burns the ammonia–hydrogen combination. This plasma–catalyst interaction reduces the reaction temperature to 320–370 °C, allowing for effective in situ hydrogen production and combustion. The design provides a zero-carbon, self-sustaining solution for both aboard and portable hydrogen fuel applications [107].
The University of Zhejiang filed CN119701824A, the most recent invention and highest cited-patent (9 citations) in December 2024. A plasma–catalytic hybrid reactor is introduced in this invention to produce hydrogen from ammonia quickly and efficiently. An arc-temperature plasma zone and coaxial catalytic zones with a CeO2/Ni reversed-phase catalyst, where CeO2 encases Ni for improved stability and hydrogen selectivity, are integrated into the design. A three-dimensional plasma jet is maintained by a revolving spiral flow generated when ammonia enters through tangential inlets. The catalyst is directly heated and activated by the jet, enabling simultaneous catalytic breakdown and plasma excitation without external heating. The reactor’s strong heat transfer, rapid start-up, and excellent energy efficiency make it ideal for mobile and distributed hydrogen systems powered by renewable electricity. Combining heat, plasma, and catalytic interaction in a small, integrated system is an innovation in plasma-catalytic decomposition [108].
This 2025 Chinese patent, CN119212789A, filed in March 2023, has the highest number of extended families (19 extended families) with five different family Jurisdictions from Australia, China, Japan, Korea, and WIPO. It describes a low-temperature, non-noble-metal plasma-catalytic method for producing CO2-free H2 from NH3. Instead of high-temperature (500–800 °C) Ru-based cracking, it uses a DBD cold-plasma reactor packed with an alumina-supported Ni catalyst promoted by Fe (typical 5 Ni–10 Fe/Al2O3), optionally with Co/Mn/Cu/Ag/La/Ce/Gd/Ba/K. The alumina support is chosen for its dielectric properties, so the plasma can polarize the catalyst, improve NH3 adsorption, and form reactive NH/NH2/H species, giving good NH3 conversion and H2/N2 selectivity at ~atmospheric pressure, <400 °C, and modest plasma power (≤20–35 W g−1). It also details scalable prep routes (impregnation, co-precipitation, sol–gel) and shows from GC that plasma alone is weak, but plasma + Ni–Fe/Al2O3 converts NH3 effectively [109].
  • With ammonia-decomposed and electrode-based catalysts
The only invention in this category is CN118462383A, which Tongji University filed in April 2024. It describes an engine-integrated dielectric barrier discharge (DBD) plasma jet-ignition system that can perform in situ plasma-catalytic ammonia reforming for on-demand hydrogen generation. In this system, air and ammonia are added to a pre-combustion chamber, where a high-voltage DBD plasma (5–10 kV, ~30 kHz) quickly breaks ammonia down into hydrogen and reactive radicals (NH ∙ , NH2 ∙ , H ∙ ) in microseconds. A spark plug then ignites these species, creating a jet flame that spreads into the main combustion chamber and ensures stable ignition of the ammonia–air mixture. The plasma zone is coated with Fe-, Co-, or Ni-based catalysts to increase further reforming efficiency and hydrogen yield, resulting in a potent plasma–catalyst interaction. This small and effective system provides a viable route to sustainable, ammonia-fueled power generation, eliminating the need for separate hydrogen storage, streamlining the fuel supply architecture, and greatly enhancing ignition reliability and combustion performance in low-speed or marine ammonia engines [110].
  • With ammonia-decomposed and membrane-separation catalysts
CN116854033A and CN116854034A were both filed in July 2023, the earliest inventions applied by University Xian Technology, both invented by Zhao Ni and Tian Hao.
CN116854034A has the highest cited-patent (9 citations). It presents a plate-hole dielectric barrier discharge (DBD) plasma-assisted device that integrates ammonia decomposition and hydrogen separation within a single, compact system. The upper reaction zone employs DBD plasma–catalytic ammonia decomposition with a Ni/MgO catalyst, in which plasma-generated energetic electrons and radicals facilitate N–H bond dissociation, forming hydrogen radicals. The lower section incorporates a Pd–Cu proton exchange membrane and zeolite molecular sieve, enabling in situ hydrogen purification and simultaneous NH3 adsorption. A surrounding magnetic coil stabilizes the discharge and enhances gas residence time, improving decomposition kinetics and plasma uniformity. This dual-stage plasma–catalyst–membrane configuration effectively minimizes NH3–H2 mixing and reverse reactions, achieving high hydrogen yield, purity, and energy efficiency in a compact and sustainable design [111].
Meanwhile, CN116854033A designs a horizontal, sealed coaxial DBD membrane reactor that performs NH3 cracking, NH3 clean-up, and H2 separation in a single pass. Gas first meets a plasma + Ni/MgO packed-bed zone that plasma-catalytically decomposes NH3. The partially converted gas then passes through a plasma and zeolite zone, which both complete decomposition and adsorb residual NH3 to prevent NH3 carryover. Finally, the stream reaches a DBD hydrogen-separation unit, where plasma splits H2 into protons that permeate a Pd–Cu proton-exchange membrane, allowing high-purity H2 to exit at the center. At the same time, N2 and unreacted NH3 remain on the shell side. Continuous H2 withdrawal suppresses the reverse reaction and mitigates “NH3–H2 mixing,” which is a weakness of ordinary plasma NH3 crackers. The outer spiral coil adds a magnetic field that lengthens residence time and increases plasma utilization, enabling the device to run at a lower temperature while still achieving high NH3 conversion and purified hydrogen in a compact geometry [112].
CN118807614A is the latest invention, filed in June 2024, and applied by the University of Hefei Technology. It discloses a concentric, layered dielectric barrier discharge (DBD) plasma reactor that enables simultaneous ammonia decomposition and hydrogen separation. The reactor comprises a quartz tube with successive layers: a porous support, a high-voltage electrode, a hydrogen-separation catalyst, a porous layer, a proton-conducting membrane, and an outer ammonia-decomposition catalyst (Fe-, Co-, Ni-, Fe–Co-, or Fe–Ni-based), all surrounded by a grounded copper mesh. When ammonia is introduced from the top, plasma generated between the electrodes activates NH3, and the outer catalyst decomposes it into N2 and H2. The produced hydrogen permeates inward through the proton membrane and is collected via the central outlet, while unreacted gases exit through secondary outlets. Continuous hydrogen removal shifts the equilibrium toward complete conversion, achieving nearly 100% NH3 decomposition under mild plasma conditions (~60 mL·min−1 NH3 feed, 80–90 mL·min−1 H2 output) [113].

4.2.7. Plasma-Based Decomposition

  • With no catalysts
CN114852959A, filed in April 2022 by Wuhan University of Technology, is the earliest invention. It discloses an engine-integrated, two-stage plasma ammonia-to-hydrogen system in which exhaust from an ammonia-fueled engine is first split: one stream is heated and sent to a plasma-activated reformer where NH3, O2, and exhaust components react to form an H2-containing reformed gas, while the other stream is mixed with precisely dosed NH3/O2 based on online analyzers to meet reforming/cracking conditions. The partially reformed gas is then fed to a second unit (an ammonia cracking generator) that uses low-temperature plasma activation to decompose the remaining ammonia, producing a final H2-rich gas that is re-injected into the engine. Because both the reforming and cracking steps are plasma-assisted rather than high-temperature catalytic, the system increases hydrogen yield, improves engine thermal efficiency, and reduces NOx, while also eliminating the need for separate high-pressure hydrogen storage [114].
CN119926328A is the latest invention, filed in March 2025 and applied by the University of Tianjin. It describes a microwave resonant plasma torch. It directly cracks ammonia in a high-energy plasma zone to produce H2 and N2, thereby eliminating the need for large, high-temperature catalytic crackers. Microwaves from a magnetron/RF source are fed into. It is a resonant cavity with a quarter- or half-wavelength central electrode to create a stable, focused plasma. Meanwhile, ammonia is introduced uniformly, allowing it to pass through the plasma column for efficient electron-impact dissociation. A downstream sensor and dual directional coupler monitor residual NH3 and microwave power, enabling real-time adjustment of feed and power to maintain product quality [115].
  • With membrane-separation catalysts
JP2024082777A, filed in March 2022, is the earliest invention. It presents a two-stage plasma-assisted ammonia reforming fuel cell system designed to reduce energy consumption during hydrogen production. Ammonia from the storage tank is first decomposed in a high-power plasma reactor to produce hydrogen and nitrogen. The unreacted ammonia is separated using a membrane unit (e.g., zeolite) and then sent to a second, low-power plasma reactor for complete decomposition. This staged approach reduces total power requirements because the second reactor operates at a lower ammonia flow rate and longer residence time. An optional platinum catalyst may be included in both reactors to improve decomposition efficiency. The resulting hydrogen–nitrogen gas mixture is fed directly to the fuel cell, ensuring ammonia-free operation and extended cell life. This patent’s innovation lies in integrating plasma reactors, membrane separation, and fuel cell operation into a compact, energy-efficient system for hydrogen generation [116].
CN120212486A is the latest invention filed in May 2025 and has six cited patents. University Xian Technology applied it. This introduces a gas-flow-driven, self-rotating, sliding-arc plasma ammonia–hydrogen burner for catalyst-free hydrogen production from ammonia. The design uses gas flow to rotate the electrodes, eliminating the need for a motor and reducing energy loss. The system consists of a coaxial high-voltage electrode assembly and a grounding cylinder, where a rotating, sliding-arc plasma forms, breaking N–H bonds in ammonia to generate hydrogen and nitrogen. To ensure stable operation and safety, it integrates flow equalization nozzles, backfire prevention valves, and an isolation grounding section. A palladium–copper proton exchange membrane at the nozzle outlet aids in hydrogen purification. This compact and self-sustaining system combines efficient plasma-driven decomposition with membrane-based hydrogen separation, providing a safe, energy-efficient, and catalyst-free pathway for on-demand hydrogen generation from ammonia, making it particularly suitable for small-scale or distributed clean energy systems [117].
  • With electrode-based and membrane-separation catalysts
US11014809B2, filed in February 2018, is the only invention in this category invented by Miura Tomonori. It has the highest number of cited-by-patent (20 citations), the highest number of cited-patents (12 citations), and the highest number of extended families (7 extended families), with five different family jurisdictions from the United States, Japan, China, Germany, and WIPO. This patent discloses a plasma-based hydrogen generation and fuel cell power system for vehicles, enabling continuous operation without external hydrogen refueling. Ammonia stored onboard is decomposed in a dielectric barrier discharge plasma reactor operating at room temperature and atmospheric pressure, where the non-equilibrium plasma dissociates NH3 molecules. A palladium alloy membrane selectively allows hydrogen atoms to pass through and recombine as high-purity H2 (≥99.9%). The generated hydrogen feeds a solid polymer fuel cell that powers the motor and recharges the onboard battery. A control unit dynamically regulates ammonia flow, plasma power, and fuel cell output based on battery charge and driving demand, ensuring energy balance and self-sustaining operation. This invention represents a novel plasma–membrane–fuel-cell integration for ammonia-fueled electric mobility, offering a zero-emission, high-efficiency alternative to conventional hydrogen storage and refueling systems [118].
  • With ammonia-decomposed and membrane-separation catalyst
JP2022108381A is the earliest filing, from January 2021. This introduces a two-stage ammonia-to-hydrogen system that enhances the durability of plasma–membrane NH3 crackers by preventing the rupture of thin Pd/Pd–Cu hydrogen-permeable membranes. In this design, ammonia is first partially catalytically decomposed in a conventional reactor, and the remaining gas is processed in a plasma-based ammonia decomposition unit, where a non-equilibrium plasma is generated between a ceramic-insulated electrode and a Pd membrane. A pressing, porous-elastic backing supports the membrane against H2 pressure, while a serpentine microchannel metal plate stabilizes the plasma discharge and gas flow. This hybrid catalytic–plasma–membrane system operates through a plasma-based decomposition process (not plasma-catalytic). It achieves higher NH3 conversion, improved hydrogen purity, and greater structural reliability for continuous fuel-cell hydrogen supply [119].
The same plasma–membrane ammonia decomposition line is disclosed in JP2022168935A, filed in April 2021. However, it addresses a different weakness—loss of hydrogen purity due to side or bypass leakage, rather than membrane rupture. The same inventor applied for and created this patent. To prevent gas from slipping past the membrane and diluting the product side, the invention includes a metal gasket with grease/liquid packing and an O-ring seal around the membrane’s outer edge, in addition to a backing porous plate (to support the membrane). This design permits plasma-based (not plasma-catalytic) ammonia decomposition with in situ membrane H2 recovery, with higher H2 purity and better membrane durability—appropriate for small fuel-cell hydrogen supply modules—in conjunction with the serpentine/microchannel ammonia plate that stabilizes the flow and the “comb” metal sections [120].

4.2.8. Others

i.
Mechanochemical Ammonolysis
This method is one of the unique technologies used to produce hydrogen from ammonia. It is one of the recent works, filed as an active patent application in October 2022 (CN115646489A), that demonstrates room-temperature, low-pressure hydrogen production from ammonia via high-energy ball milling rather than thermal, electrochemical, or plasma pathways. Ru, Pt–Ru, and Fe nano/alloy catalysts (milled to ≈50–100 nm) are loaded into a sealed ball-mill reactor with ZrO2 grinding media and contacted with NH3 at 15–60 °C and 0.1–0.8 MPa. Mechanical collisions drive N–H bond scission and H–H formation on metal surfaces, removing N poisoning via continual impact. Pt–Ru shows a higher H2 yield than Ru under identical milling conditions. The approach eliminates external heating/pressurization, pointing to in situ H2 generation when surplus mechanical energy is available (e.g., rotating machinery). Key development needs include energy efficiency accounting (kWh/kg-H2) for milling, continuous-flow reactor designs, NH3 handling/safety, scale-up of catalyst/media wear, and gas–solid mass transfer [121].
ii.
Chemical Chain Decomposition
JP2010265138A, filed in May 2009, is the first invention to describe a non-catalytic chemical pathway for creating high-pressure hydrogen by reacting liquid ammonia with monovalent metal hydrides such as LiH, NaH, or KH inside a pressure-resistant reactor. The process rapidly transforms the metal hydride to a metal amide (e.g., NaH → NaNH2) and releases hydrogen, allowing for pressures of around 10–12 MPa without mechanical compression. Because the hydrides are completely burned during the process, the final hydrogen pressure can be accurately controlled by varying the amount of hydride used. The patent illustrates that using liquid ammonia significantly accelerates the process compared to gaseous ammonia, with operating settings chosen to maintain ammonia in the liquid state at sub-zero temperatures or elevated pressures approaching room temperature. Because no catalyst is employed and the metal hydride serves only as a reactive hydrogen donor, this method is classified as a non-catalytic hydride-ammonia pathway rather than a thermal cracking or an electrochemical process. This invention represents a process- and device-level innovation that enables small, catalyst-free, high-pressure hydrogen generation for applications such as hydrogen refueling stations, fuel cells, and hydrogen engines [122].
Moreover, the most recent invention, CN117735479A, was filed in September 2022. It proposes a chemical-looping-based thermal catalytic method for ammonia decomposition, achieving complete conversion at lower temperatures than those required by standard Ni/Fe catalysts. In this procedure, ammonia first interacts with an alkali metal, such as Na or K, at 25–300 °C and 1–10 bar to generate a solid amino compound (e.g., NaNH2 or KNH2), thereby fixing the ammonia in a solid form. This amino compound is then ball-milled with a transition metal, such as Fe, Mn, Co, Ni, Cu, or Ru, to create a composite “material body” with a catalyst content of 50–90 weight percent. In the second phase, this material is decomposed in a fixed-bed reactor at 250–600 °C under inert conditions, releasing hydrogen and nitrogen and regenerating the alkali metal. Experiments reveal that NaNH2 and KNH2 alone can enable chemical-chain ammonia breakdown, but the introduction of transition metals significantly enhances the hydrogen production rate. Mn- and Ru-based systems (e.g., 50% Mn-KNH2, 50% Ru-NaNH2) had the maximum activity. The process may fully convert the absorbed ammonia below 400 °C, enabling CO-free hydrogen synthesis under milder thermal conditions while also allowing the amino intermediate to serve as a solid medium for ammonia storage and transport. From a landscape perspective, this patent represents a catalyst- and process-level innovation in the thermal catalytic decomposition of ammonia, employing a chemical looping strategy to reduce reaction temperatures and integrate storage, transport, and decomposition functions within a single solid material system [123].

4.2.9. Hybrid (Combination of Synthesis Methods)

a.
Thermal Catalytic and Electrochemical Decomposition
JP2013078716A, filed in October 2011 and granted in November 2015, is the earliest invention. It has the highest cited-patent (15 citations). It describes a system for compost/sewage plants that captures NH3- and sulfur-containing biogas, concentrates it with a rotating porous sorption–heating unit, removes sulfur, and then cracks part of the ammonia in an electrically heated porous catalytic reactor (Ni or Ni–Cr on alumina) to produce H2. The resulting NH3–H2 mixture is sent to a tubular solid-electrolyte power-generation cell (preferably BYZ) with a graded Ni–Fe anode—Fe-rich at the inlet for NH3, more Ni downstream for H2—so the gas is electrochemically decomposed while producing electricity. The power can be reused to heat the porous elements. Overall, it upgrades smelly, low-value NH3 biogas into clean N2/H2O and on-site electricity, eliminating NOx/SOx emissions and requiring no large external furnaces [124].
The US2014/0072889A1 patent, filed in September 2012, has been the most forward-cited patent, with 19 other patents citing it, and presents a system-level innovation for hydrogen production and utilization from ammonia within solid oxide fuel cell (SOFC) and solid oxide regenerative fuel cell (SORFC) systems. Ammonia is used as the primary carbon-free fuel, decomposed either internally within the SOFC anode or externally in an ammonia-cracking reactor to produce hydrogen and nitrogen. The hydrogen is then electrochemically oxidized to generate electricity, while exhaust gases are recycled through hydrogen separators, water removal membranes, and cascaded pumps to increase overall fuel utilization. The system integrates multiple reactors, including an ammonia reactor, a Sabatier reactor, a molten carbonate fuel cell (MCFC), and an anode tail-gas oxidizer (ATO), to enable heat recovery, nitrogen removal, and greenhouse gas minimization. The anode employs nickel-based cermet catalysts (Ni–YSZ or Ni–ceria) for ammonia decomposition and hydrogen oxidation. At the same time, a YSZ electrolyte serves as both an ionic membrane and a separator. Overall, this invention represents an advanced ammonia-fueled SOFC configuration that combines electrocatalytic hydrogen generation, thermal energy recovery, and emission-free power generation, making it suitable for stationary or industrial-scale carbon-free energy systems [125].
US2023/0366109A1, a patent filed in October 2021 with family Jurisdictions from the United States and WIPO, discloses a hybrid thermal–electrochemical cell designed for on-demand hydrogen production from ammonia at intermediate temperatures (~250 °C). The system couples thermochemical ammonia decomposition using Cs-promoted Ru/CNT catalysts with electrochemical hydrogen extraction across a solid-acid electrolyte (CsH2PO4). Hydrogen formed in the thermal layer is transported as protons through the membrane and recombines into ultra-pure H2 at the cathode. This configuration eliminates the need for an external cracker or high-temperature reactor, achieving 100% Faradaic efficiency, low energy input, and ammonia tolerance up to 20% CO impurities. The innovation lies in combining catalytic and electrochemical processes within a single solid-state device, enabling compact and emission-free hydrogen conversion [126].
Building on this, US2024/0425368A1, filed in January 2023, represents an advanced implementation of the same concept. It integrates a thermochemical Ru/CNT–Cs catalyst layer with an electrochemical solid-acid membrane cell operating around 250 °C, enhancing reaction efficiency and durability. The design further optimizes hydrogen separation and compression, removing the need for high-temperature cracking (>400 °C) or downstream purification while producing high-purity hydrogen. This patent has family Jurisdictions of Europe, Japan, the United States, and WIPO, with extended families of 4 [127].
CN119677689A, filed in September 2023, is the latest invention and has the highest number of extended families (26 extended families), with six different jurisdictions: Japan, China, the United States, Europe, Mexico, and WIPO. It introduces a dual-stage, hybrid catalytic system for onboard hydrogen generation from ammonia in vehicles. The first stage is a thermal catalytic reactor that uses engine exhaust heat to crack ammonia on a 3D-printed TPMS or tube-bundle nickel-based catalyst, converting NH3 → H2 + N2. When exhaust heat is insufficient (e.g., during cold start or idling), ammonia is redirected to a second-stage electrocatalyst unit, where a Ni-alloy heating element coated with catalyst electrically heats and decomposes ammonia. This design provides rapid startup, compact geometry, and efficient exhaust heat recovery, allowing vehicles to operate without compressed hydrogen storage while maintaining a stable hydrogen supply and clean, CO2-free combustion [128].
b.
Thermal Catalytic and Plasma-based Decomposition
JP2021017389A is the earliest invention filed in July 2019. It discloses a reforming system for ammonia that solves the slow-start problem of NH3 reformers. During startup, a small plasma unit first decomposes ammonia at room temperature to produce a hydrogen-rich gas. This hydrogen is then combined with ammonia and air and sent into the reformer, allowing the combustion catalyst to ignite quickly. Once the reformer reaches the target temperature, the plasma line is shut off, and regular operation continues using a thermally coupled design. An ammonia-combustion section (Pd/Cu, CuO–Al) supplies heat to a downstream ammonia-reforming section (Ru-based), which cracks NH3 into H2/N2. The invention is therefore a system-level integration of plasma-assisted startup with conventional catalytic ammonia combustion and catalytic ammonia decomposition, aimed at faster, heater-less start and stable hydrogen supply [129].
WO2020/217998A1, filed in April 2020, has the highest forward citations (6 citations) and the highest extended families (11 extended families) from 5 different family jurisdictions: Japan, Germany, the United States, China, and WIPO. It presents a hybrid ammonia-to-hydrogen reformer that combines plasma decomposition, catalytic reforming, and membrane separation to produce fuel cleanly and efficiently. Ammonia is first dissociated in a dielectric-barrier plasma reactor, where a hydrogen-selective membrane extracts ≥ 99% pure hydrogen. A secondary Ru/Al2O3 catalytic unit operates at ~250 °C to yield lower-purity hydrogen (5–15%), and both streams are blended under automated control to create an optimized NH3/H2 fuel mixture (≈32% H2: 68% NH3). The system continuously adjusts plasma power, flow rates, and composition to match engine load, enhancing ignition stability and reducing NOx emissions. Overall, it demonstrates an integrated, system-level advancement for flexible hydrogen–ammonia combustion and power generation [130].
KR20240062775A is the latest invention filed in November 2022 and the highest-cited patent (5 citations) invented by Choi Hyun Chul. It discloses a hybrid ammonia-to-hydrogen system that first cracks ammonia in a micro-channel catalytic reactor (a plate coated or filled with Ru/Ni/Co/Fe on heat-resistant supports) to achieve high conversion at 450–500 °C despite the strong endothermicity. The remaining NH3 is then passed through an RF/MW plasma reactor, which decomposes the trace NH3 into H2 and N2, allowing the gas to proceed directly to a PSA without requiring a separate NH3 adsorption/removal unit. By combining microreactor-level heat transfer with plasma polishing, the process removes the entire adsorber/regeneration/scrubber section of conventional NH3-cracking plants, reduces equipment costs, and increases hydrogen yield per unit of NH3 while still producing PSA-grade, high-purity hydrogen [131].
KR20230084018A was filed in October 2022 and was granted in July 2025. It discloses a hybrid ammonia-to-hydrogen production system combining a conventional thermal catalytic reactor with a plasma-based reactor to remove residual NH3 before PSA purification. Ammonia is decomposed over Ru/SiC or Ni–Co/SiC catalysts at ~600 °C, and the plasma reactor (RF/MW, 0.01–30 GHz) further decomposes trace NH3 to <1 ppm, producing high-purity H2 without the need for an ammonia adsorption tower or regeneration system. This integration reduces process complexity, cost, and equipment footprint while maintaining high conversion and hydrogen purity [132].
KR20230084018A utilizes a conventional fixed-bed catalytic reactor with a downstream plasma unit to remove residual ammonia prior to PSA, thereby simplifying the process by eliminating the adsorption stage. KR20240062775A enhances this design with a microplate-type catalytic reactor, improving heat transfer and efficiency and enabling better conversion at lower temperatures. In short, the 2023 patent improves the process, while the 2024 patent improves both the reactor design and overall efficiency.
c.
Thermal Catalytic and Plasma Catalytic Decomposition
CN119113966A is the earliest invention filed in October 2024. It presents a hybrid rapid-start ammonia-to-hydrogen system that combines plasma and thermal catalytic decomposition. A small DBD plasma reactor with a Ru catalyst quickly generates hydrogen at room temperature, which fuels a burner to heat the main Fe/Ru-based fixed-bed cracker. This reduces startup time to about 10 min. The cracked gas then passes through a hydrogen-selective V/Nb–Mo–Cr alloy membrane to yield ≥99.99% pure H2. By integrating plasma catalysis, burner heating, and membrane purification, the system enables fast, efficient hydrogen generation for mobile or emergency applications [133].
CN119858897A is the latest invention filed in January 2025. It proposes a rapid-start ammonia-to-hydrogen system that places graphene inside a microwave-heated quartz reactor. Once microwaves are switched on, the graphene absorbs the radiation, heats to approximately 1000 °C in a few seconds, and simultaneously generates a discharge-plasma environment. Under this combined thermal–plasma effect, incoming ammonia decomposes almost immediately (1–10 s) into hydrogen and nitrogen, thereby overcoming the usual 30 min warm-up time of conventional electrically heated reactors. The design can also incorporate a small downstream NH3-decomposition catalyst bed and an argon co-feed to complete the reaction of unreacted ammonia and enhance the plasma, resulting in higher overall conversion. Because a single microwave unit drives the entire reactor, the system is simpler, responds faster to hydrogen demand, and is more energy-efficient, making it suitable as a flexible front-end for ammonia-based hydrogen supply in power and fuel-cell systems [134].

4.3. Key Technology Trends and Practical Deployment Challenges

The analysis showed that thermal catalytic ammonia decomposition is the most common type of patent. This indicates that the technology is mature and that system-level design priorities are becoming more critical, with a focus on reliability and ease of deployment [135]. A common theme in the examined patents is the use of thermal catalytic systems. These systems typically employ either tubular or high-temperature fixed-bed reactor configurations, often utilizing standard heat-exchange or furnace components. These designs enable stable operation at scales relevant to industrial applications, accommodating the highly endothermic nature of ammonia cracking. Additionally, a large number of patents focus on reducing ammonia slip and purifying hydrogen before downstream processing, indicating that product gas safety and quality are the primary design considerations for these processes.
A typical design pattern in most patents is the use of heat-recovery techniques, such as recuperative heat exchange or coupling with external thermal sources, to offset the high energy requirement of ammonia decomposition. The extensive use of such configurations demonstrates that designers consistently prioritize process robustness and energy integration to minimize deployment risk and facilitate seamless integration with existing industrial systems. Due to these system-oriented design choices, thermal catalytic methods remain the most proven and widely patented method for converting ammonia to hydrogen [135].
However, the fact that electrochemical, hybrid, and plasma-based systems are still in their early stages does not indicate a lack of innovation; instead, it shows that deployment limitations remain significant. These patents frequently discuss issues related to the system’s complexity, the effectiveness of the coupling between the plasma and the catalyst, the membrane’s durability in chemically harsh environments, and the increase in both initial investment and ongoing operating costs [136]. Furthermore, it is frequently stated that these technologies are still in the early stages of system integration because solutions to issues of NOx formation, thermal regulation, and long-term material stability are presented as engineering challenges.
Recent studies (2024–2025) have emphasized reactor thermal management, compact electrified cracking concepts, and intensified membrane-reactor configurations to reduce energy penalties while improving hydrogen purity, confirming that system integration is now a primary driver of performance and deployability [137,138].
According to the innovation-type framework used in this study to interpret thermal catalytic pathways, the majority of innovations were driven by systems or processes, and the most crucial features were integration with current industrial and energy systems, scalability, and reliability. In terms of operational flexibility, compatibility with electrification, and efficiency, catalysts and devices are more important in new low-temperature and hybrid approaches. Unfortunately, these benefits are currently constrained by unresolved materials and integration issues that limit their readiness for widespread deployment.
Overall, the contrast between these routes reveals a clear separation between deployment-ready system architectures and exploration technologies still constrained by integration and materials challenges. According to the patent landscape, other routes are important innovation frontiers that require further system-level development to reach the same level of deployment viability, even though thermal catalytic ammonia decomposition is approaching commercial maturity.

5. Conclusions

Ammonia has gained popularity as a practical hydrogen carrier due to its high hydrogen content, established global supply chains, and compatibility with large-scale energy systems. As interest in hydrogen production from ammonia grows, distinguishing between technologically mature ammonia-cracking pathways and those still in the research stage becomes increasingly essential. Using a PRISMA-aligned methodology and a statistically validated search strategy, this study examined 708 validated patent families, representing at least 86.1% of relevant patents with 95% confidence, as determined by the Clopper–Pearson method. This robust approach resulted in a high-quality dataset suitable for assessing global technological trends. The patent landscape indicates that thermal catalytic ammonia decomposition remains the most mature and widely used pathway, with ongoing research focusing on catalyst optimization, reactor design, and system-level integration. Ru- and Ni-based catalysts, in particular, remain dominant due to their demonstrated activity, durability, and scalability in industrial cracking systems. At the same time, an increasing number of patents in electrochemical, plasma-based, photocatalytic, and hybrid decomposition routes indicate a growing interest in low-temperature, flexible, and potentially renewable hydrogen production pathways, even though these technologies are still in the early stages of development. Geographically, innovation activity is concentrated in Asia, particularly in China, Japan, and South Korea, indicating advanced capabilities in materials engineering, catalyst morphology, and system integration. These regions have a significant impact on current and future ammonia-to-hydrogen technologies, serving as key hubs for collaboration, technology transfer, and industrial deployment.
Beyond summarizing current developments, this study focuses on future research directions and technological opportunities emerging from the patent landscape. While thermal catalytic cracking is nearing commercial maturity, further improvements are needed in low-temperature operation, catalyst lifetime, and energy efficiency. Emerging electrochemical, plasma-based, photocatalytic, and hybrid systems show promise for decentralized and renewable hydrogen production; however, further progress is needed in material stability, system integration, and scalability. Multifunctional systems, membrane-integrated reactors, and approaches that combine ammonia decomposition, purification, and hydrogen utilization within unified process architectures are up-and-coming areas for future research. Overall, patent trends show a clear shift from laboratory-scale concepts to deployable industrial solutions, with innovation increasingly centered on system-level optimization and integration. This global patent landscape offers insights into both the current state of technological maturity and the pathways most likely to shape the future of low-carbon hydrogen production from ammonia.

Author Contributions

Conceptualization, H.S. and P.E.A.; methodology, M.S.H.R. and P.E.A.; software, M.S.H.R. and P.E.A.; validation, M.S.H.R., H.S. and P.E.A.; formal analysis, M.S.H.R. and P.E.A.; investigation, M.S.H.R. and D.N.H.A.P.H.O.A.; data curation, M.S.H.R. and D.N.H.A.P.H.O.A. and P.E.A.; writing—original draft preparation, M.S.H.R.; writing—review and editing, M.S.H.R., H.S. and P.E.A.; visualization, M.S.H.R. and P.E.A.; supervision, H.S. and P.E.A.; project administration, H.S. and P.E.A.; funding acquisition, H.S. and P.E.A. All authors have read and agreed to the published version of the manuscript.

Funding

This research was funded by the Universiti Brunei Darussalam Research Grant No. UBD/RSCH/URG/RG(b)/2023/037.

Data Availability Statement

The patent data analyzed in this study were retrieved from the Lens.org database, with full search query and data-handling protocol provided in Appendix A. The list of patent identifiers used in the analysis is available from the corresponding authors upon reasonable request.

Conflicts of Interest

The author declares no conflicts of Interest.

Appendix A

Methodology: Search Strategy and Data Handling

The Lens.org database was the primary database used for the patent landscape review, with a search executed on 15 September 2025. A keyword search, covering process, method and IPC categories, on the Title, Abstract, and Claims was conducted to ensure that all relevant patent documents were identified. The complete search query used in Lens.org was in the form,
(Process keywords) AND (Method keywords) AND (IPC codes)
with exact keywords for each category given in Table A1, with no language restrictions. This initial search produced 1394 patent records.
Table A1. Full Lens.org query string used for the relevant patents.
Patent family handling was based on a simple rule for deduplicating families: mirrored national filings and family members were only counted once. Using the “grouped by extended families” systematic filtering feature on Lens.org, only the earliest-priority document in each patent family was retained for analysis, avoiding multiple counts of the same invention across different jurisdictions. This eliminated 460 duplicate patent records from the collection, leaving 943 patent families.
Additionally, the search was filtered to include only published patents issued between 1 January 2005 and 1 August 2025, to encompass both early fundamental developments and contemporary advances in ammonia-to-hydrogen technology. The analysis also focused only on the granted patent, patent application, and limited patent for the document types. These filtering processes eliminated 65 patent families.
The analysis was further limited to patents that described processes for converting ammonia into hydrogen, including thermal, catalytic, plasma-based, electrochemical, photocatalytic, and hybrid methods. Fertilizer synthesis, ammonia storage or transit without conversion, NOx reduction, refrigeration cycles, and other chemical processes that did not generate hydrogen from ammonia were among the patents that were denied as a consequence. This resulted in the removal of 161 patent families, leaving 708 patent families in the final dataset.
This systematic method of organizing, filtering, and handling families ensured that the resulting dataset was not redundant, technically relevant, and could be replicated. This sets the stage for later patent landscape research.

References

  1. Adamou, P.; Bellomi, S.; Hafeez, S.; Harkou, E.; Al-Salem, S.M.; Villa, A.; Dimitratos, N.; Manos, G.; Constantinou, A. Recent progress for hydrogen production from ammonia and hydrous hydrazine decomposition: A review on heterogeneous catalysts. Catal. Today 2023, 423, 114022. [Google Scholar] [CrossRef] [Scilit]
  2. Guilbert, D.; Vitale, G. Hydrogen as a Clean and Sustainable Energy Vector for Global Transition from Fossil-Based to Zero-Carbon. Clean Technol. 2021, 3, 881–909. [Google Scholar] [CrossRef] [Scilit]
  3. Ang, T.-Z.; Salem, M.; Kamarol, M.; Das, H.S.; Nazari, M.A.; Prabaharan, N. A Comprehensive Study of Renewable Energy Sources: Classifications, Challenges and Suggestions. Energy Strategy Rev. 2022, 43, 100939. [Google Scholar] [CrossRef] [Scilit]
  4. IRENA. World Energy Transitions Outlook 2024: 1.5 °C Pathway; International Renewable Energy Agency: Masdar City, United Arab Emirates, 2024; Available online: https://www.irena.org/-/media/Files/IRENA/Agency/Publication/2024/Nov/IRENA_World_energy_transitions_outlook_2024.pdf (accessed on 5 December 2025).
  5. Aditiya, H.B.; Aziz, M. Prospect of Hydrogen Energy in Asia-Pacific: A Perspective Review on Techno-Socio-Economy Nexus. Int. J. Hydrogen Energy 2021, 46, 35027–35056. [Google Scholar] [CrossRef] [Scilit]
  6. Kimura, S.; Phoumin, H.; Purwanto, A.J. Ministry of Energy, Brunei Darussalam, ‘Brunei Darussalam Country Report’. Energy Outlook Energy-Sav. Potential East Asia 2023, 2023, 73–99. Available online: https://www.eria.org/uploads/Energy-Outlook-and-Saving-Potential-2023-rev.pdf/ (accessed on 5 December 2025).
  7. Bokka, H.K.; Lau, H.C. Decarbonizing Borneo’s Power and Industry Sectors by Carbon Capture and Storage. Geoenergy Sci. Eng. 2023, 226, 211796. [Google Scholar] [CrossRef] [Scilit]
  8. Pangestika, V.A.; Namira, G.L.; Merdekawati, M.; Mardani, G.H.H. Renewable Energy Certificate (REC) Market Demand Mapping in Brunei Darussalam. Part of Policy Brief Series for RECAP No. 6, 2025. Available online: https://aseanenergy.org/publications/renewable-energy-certificate-rec-market-demand-mapping-in-brunei-darussalam (accessed on 5 December 2025).
  9. Annex 3. An Overview of Climate Change Mitigation Challenges in Brunei. Annual Consultation Report: Brunei Darussalam 2023. 2023. Available online: https://amro-asia.org/wp-content/uploads/2024/05/Selected-Issue_Climate-Change-Mitigation-Challenges-in-Brunei.pdf (accessed on 5 December 2025).
  10. Chee, W.C.; Ho, W.S.; Hashim, H.; Lim, L.K.; Ab Muis, Z.; Nizamuddin, A.D.; Wong, K.Y.; Overland, I.; Shidiq, M.; Pradnyaswari, I. Renewable Energy Trade Among the ASEAN Countries and The Road to Net-zero Carbon Emissions. Energy Strategy Rev. 2025, 62, 101878. [Google Scholar] [CrossRef] [Scilit]
  11. Pacudan, R.; Kimura, S. Brunei Darussalam: Shifting to a Hydrogen Society. 2020. Available online: https://www.eria.org/uploads/media/Research-Project-Report/RPR-2020-04-Brunei-Shifting-Hydrogen-Society/Brunei-Darussalam-Shifting-to-Hydrogen-Society-new.pdf (accessed on 5 December 2025).
  12. Hossain Bhuiyan, M.M.; Siddique, Z. Hydrogen as an Alternative Fuel: A Comprehensive Review of Challenges and Opportunities in Production, Storage, and Transportation. Int. J. Hydrogen Energy 2025, 102, 1026–1044. [Google Scholar] [CrossRef] [Scilit]
  13. Akpasi, S.O.; Anekwe, I.M.S.; Tetteh, E.K.; Amune, U.O.; Mustapha, S.I.; Kiambi, S.L. Hydrogen as a Clean Energy Carrier: Advancements, Challenges, and Its Role in A Sustainable Energy Future. Clean Energy 2025, 9, 52–88. [Google Scholar] [CrossRef] [Scilit]
  14. Chu, C.C.; Suhainin, M.D.; Pg Haji Omar Ali, D.N.H.A.; Lim, J.Y.; Swee, P.S.; Raymundo, J.Y.; Tan, R.X.H.; Yap, M.K.; Khoo, H.F.; Suhaimi, H.; et al. A Techno-Economic Assessment of Steam Methane Reforming and Alkaline Water Electrolysis for Hydrogen Production. Hydrogen 2025, 6, 2. [Google Scholar] [CrossRef] [Scilit]
  15. Pg Haji Omar Ali, D.N.H.A.; Suhaimi, H.; Abas, P.E. Membrane-Based Hydrogen Production: A Techno-Economic Evaluation of Cost and Feasibility. Hydrogen 2025, 6, 9. [Google Scholar] [CrossRef] [Scilit]
  16. Zhu, N.; Yang, F.; Hong, Y.; Liang, J. Hydrogen Production from Ammonia Decomposition: Advances in Ru- and Ni-based Catalysts. Int. J. Hydrogen Energy 2025, 98, 1243–1261. [Google Scholar] [CrossRef] [Scilit]
  17. Huang, X.; Lei, K.; Mi, Y.; Fang, W.; Li, X. Recent Progress on Hydrogen Production from Ammonia Decomposition: Technical Roadmap and Catalytic Mechanism. Molecules 2023, 28, 5245. [Google Scholar] [CrossRef] [Scilit] [PubMed]
  18. Lucentini, I.; Garcia, X.; Vendrell, X.; Llorca, J. Review of the Decomposition of Ammonia to Generate Hydrogen. Ind. Eng. Chem. Res. 2021, 60, 18560–18611. [Google Scholar] [CrossRef] [Scilit]
  19. Aizaz, U.; Ansari, M.A.; Malaibari, Z.O.; Hussain, I. Frontiers in Catalytic Ammonia Decomposition: A Cutting-edge Tutorial and Review on Catalyst Innovation Trends and Techno-economic Insights. Chem. Eng. J. Green Sustain. 2026, 1, 100001. [Google Scholar] [CrossRef] [Scilit]
  20. Han, T.; Wei, L.; Xie, S.; Liu, Y.; Dai, H.; Deng, J. Catalyst Design for Ammonia Decomposition: An Overview. Ind. Chem. Mater. 2025, 3, 311–331. [Google Scholar] [CrossRef] [Scilit]
  21. Ali, A.; Tufail, A.; De Silva, L.C.; Abas, P.E. Innovating Patent Retrieval: A Comprehensive Review of Techniques, Trends, and Challenges in Prior Art Searches. Appl. Syst. Innov. 2024, 7, 91. [Google Scholar] [CrossRef] [Scilit]
  22. Ungria, J.A.Y. Hydrogen Patents for A Clean Energy Future—A Global Trend Analysis of Innovation along Hydrogen Value Chains; IEA: Paris, France, 2023; Available online: https://iea.blob.core.windows.net/assets/1b7ab289-ecbc-4ec2-a238-f7d4f022d60f/Hydrogenpatentsforacleanenergyfuture.pdf (accessed on 5 December 2025).
  23. Trangwachirachai, K.; Rouwenhorst, K.; Lefferts, L.; Albanese, J.A.F. Recent Progress on Ammonia Cracking Technologies for Scalable Hydrogen Production. Curr. Opin. Green. Sustain. Chem. 2024, 49, 100945. [Google Scholar] [CrossRef] [Scilit]
  24. Rhyme, M.S.H. Innovations in Hydrogen Production from Ammonia: A Patent Landscape Review. Research Project Bachelor Thesis, Faculty of Integrated Technologies, Universiti Brunei Darussalam, Gadong, Brunei, 2025. [Google Scholar]
  25. van Rijn, T.; Timmis, J.K. Patent Landscape Analysis—Contributing to the Identification of Technology Trends and Informing Research and Innovation Funding Policy. Microb. Biotechnol. 2023, 16, 683–696. [Google Scholar] [CrossRef] [Scilit]
  26. Martinez, C. Insight into Different Types of Patent Families. In OECD Science, Technology and Industry Working Papers; OECD Publishing: Paris, France, 2010; Volume 2010/02. [Google Scholar] [CrossRef]
  27. Trippe, A. Guidelines for Preparing Patent Landscape Reports Guidelines Prepared for the World Intellectual Property Organization (WIPO) with Contributions from WIPO Secretariat; World Intellectual Property Organization: Geneva, Switzerland, 2015; Available online: https://www.wipo.int/edocs/pubdocs/en/wipo_pub_946.pdf (accessed on 5 December 2025).
  28. Lim, S.W.; Firdaous, M.H.; Abas, P.E. Echoes from Below: A Systematic Review of Cement Bond Log Innovations Through Global Patent Analysis. Inventions 2025, 10, 67. [Google Scholar] [CrossRef] [Scilit]
  29. Francis, N.; Ong, A.; Suhaimi, H.; Abas, P.E. Patent Landscape Review on Ankle Sprain Prevention Method: Technology Updates. Inventions 2023, 8, 53. [Google Scholar] [CrossRef] [Scilit]
  30. Azis, F.A.; Rijal, M.; Suhaimi, H.; Abas, P.E. Patent Landscape of Composting Technology: A Review. Inventions 2022, 7, 38. [Google Scholar] [CrossRef] [Scilit]
  31. Karl, K.; Viktor, H.; Robert, F.; Gottfried, F. Ammonia Cracker for Production of Hydrogen. U.S. Patent 6 936 363 B2, 30 August 2005. Available online: https://www.lens.org/lens/patent/061-776-716-892-560/frontpage?l=en (accessed on 15 September 2025).
  32. James, L.W.L.; David Gwynn, K.J. Systems and Methods for Supplementing an Ammonia Heat-Exchange Unit for Engine Cooling with a Radiator. U.S. Patent 12 442 324 B1, 14 October 2025. Available online: https://www.lens.org/lens/patent/103-127-443-009-227/frontpage?l=en (accessed on 15 September 2025).
  33. Takashi, S.; Tetsuo, N.; Shinji, I. Hydrogen Production Apparatus. JP Patent P2005 145748A, 9 June 2005. Available online: https://www.lens.org/lens/patent/136-207-383-389-340/frontpage?l=en (accessed on 15 September 2025).
  34. Jin, J.; Wu, Z. Hydrogen Rich Gas Producer. CN Patent 201395510Y, 3 February 2010. Available online: https://www.lens.org/lens/patent/076-711-060-497-505/frontpage?l=en (accessed on 15 September 2025).
  35. Chen, J.; Hou, G. Hydrogen Production Device of Ammonia Cracking Furnace. CN Patent 201512408 U, 23 June 2010. Available online: https://www.lens.org/lens/patent/164-720-308-794-250/frontpage?l=en (accessed on 15 September 2025).
  36. Park, J.H.; Jung, S.Y.; Cho, B.O.; Kim, Y.; Lee, S.; Noh, K.M.; Park, J.; Kim, S.H.; Lee, H.J.; Kim, T.W. On-Site Method for Producing High Purity Hydrogen from Ammonia Apparatus Therefor and On-site Type Module System Thereof. KR Patent 10 2247199, 4 May 2021. Available online: https://www.lens.org/lens/patent/039-307-087-302-978/frontpage?l=en (accessed on 15 September 2025).
  37. Boris, S.; Cha, J.; Jo, Y.S.; Robert, J.G.; Kim, H. Systems and Methods for Processing Ammonia. U.S. Patent 11 795 055 B1, 24 October 2023. Available online: https://www.lens.org/lens/patent/140-922-100-986-151/frontpage?l=en (accessed on 15 September 2025).
  38. Mølgaard, M.P.; Emil, L.K.; Kim, A.-P.; Robert, K. On Demand Hydrogen from Ammonia. U.S. Patent 12 227 414 B2, 18 February 2025. Available online: https://www.lens.org/lens/patent/019-930-565-747-20X/frontpage?l=en (accessed on 15 September 2025).
  39. Rocco, T.R.; Santino, L.; Piero, V.; Leonardo, V. Apparatus for Catalytic Thermophysical Scission of Liquid Ammonia in Gaseous Nitrogen and Hydrogen. WO Patent 2007/119262 A2, 25 October 2007. Available online: https://www.lens.org/lens/patent/021-985-145-880-805/frontpage?l=en (accessed on 15 September 2025).
  40. Mølgaard, M.P.; Robert, K.; Kim, A.-P. Endothermic Reactions Heated by Resistance Heating. U.S. Patent 2025/0121344 A1, 17 April 2025. Available online: https://www.lens.org/lens/patent/129-892-584-364-072/frontpage?l=en (accessed on 15 September 2025).
  41. Ghenadie, B.; Timothy, H.; Jonathan, M.; Ian, W. Gas Turbine System. U.S. Patent 10 753 276 B2, 25 August 2020. Available online: https://www.lens.org/lens/patent/031-148-345-802-646/frontpage?l=en (accessed on 15 September 2025).
  42. Hideo, H.; Fumitaka, H.; Toshiharu, Y.; Yoshitake, T.; Michikazu, H.; Masaaki, K. Catalyst for Producing Hydrogen and Method for Producing Hydrogen. CA Patent 2883503 A1, 11 August 2020. Available online: https://www.lens.org/lens/patent/004-406-811-625-393/frontpage?l=en (accessed on 15 September 2025).
  43. Bin, G.; Lei, Z.; Chenyu, Z.; Xuehan, H.; Tiankui, Z.; Zhen, H. Efficient Self-Heating Ammonia Decomposition Hydrogen Production Reactor. CN Patent 120155131 A, 17 June 2025. Available online: https://www.lens.org/lens/patent/194-481-535-143-506/frontpage?l=en (accessed on 15 September 2025).
  44. Bin, G.; Lei, Z.; Xuehan, H.; Chenyu, Z.; Tiankui, Z.; Zhen, H. Porous Carbon Coated Ruthenium-Based Ammonia Decomposition Hydrogen Production Catalyst as well as Preparation Method and Application Thereof. CN Patent 119951503 A, 9 May 2025. Available online: https://www.lens.org/lens/patent/007-094-602-835-182/frontpage?l=en (accessed on 15 September 2025).
  45. Xiaohui, S.; Bin, L.; Wei, L.; Xin, W.; Xiaoling, Z.; Na, Z. Ammonia Cracking Hydrogen Production and Hydrogenation Device and Method Based on Multi-Stage Utilization of Cold Energy. CN Patent 120268340 A, 8 July 2025. Available online: https://www.lens.org/lens/patent/128-441-289-012-120/frontpage?l=en (accessed on 15 September 2025).
  46. Cheng, B.; Wang, M.; Feng, L.; Qian, C. Efficient Large-Scale Coupling Hydrogen Production System. CN Patent 223127277 U, 22 July 2025. Available online: https://www.lens.org/lens/patent/006-643-744-218-203/frontpage?l=en (accessed on 15 September 2025).
  47. Pach, J.D.; Mcfarlane, K.; Ashcroft, J.L. System and Process for Cracking Ammonia. GB Patent 2633197 A, 22 October 2025. Available online: https://www.lens.org/lens/patent/115-109-488-921-339/frontpage?l=en (accessed on 15 September 2025).
  48. He, L.; Xiaochao, W.; Yiran, Z.; Xuteng, Z. Electrically-Assisted Low-Temperature Ammonia Decomposition Hydrogen Production Method. CN Patent 117509537 A, 24 October 2025. Available online: https://www.lens.org/lens/patent/055-645-412-236-794/frontpage?l=en (accessed on 15 September 2025).
  49. Ji, F.; Liguang, B.; Xiaodong, Z.; Binbin, D.; Wenjie, Y. Preparation Method and Application of Pd Nano-Catalyst with Core-Shell Structure. CN Patent 120325293 A, 18 July 2025. Available online: https://www.lens.org/lens/patent/062-174-001-407-945/frontpage?l=en (accessed on 15 September 2025).
  50. Roy, P.M.; Charles, J.C. Ammonia-Based Hydrogen Generation Apparatus and Method for Using Same. U.S. Patent 7 875 089 B2, 25 January 2011. Available online: https://www.lens.org/lens/patent/031-156-241-547-054/frontpage?l=en (accessed on 15 September 2025).
  51. Debasish, C.; Nybo, P.H.; Tue, J. Apparatus for Generating Hydrogen from Ammonia Stored in Solid Materials and Integration Thereof into Low Temperature Fuel Cells. WO Patent 2011/107279 A1, 9 September 2011. Available online: https://www.lens.org/lens/patent/195-805-578-446-931/frontpage?l=en (accessed on 15 September 2025).
  52. Jiang, L.; Luo, Y.; Lin, L.; Chen, C.; Cai, G. Ammonia Decomposition Hydrogen Production System and Hydrogen Refueling Station System. CN Patent 111957270 A, 22 October 2024. Available online: https://www.lens.org/lens/patent/074-506-274-832-158/frontpage?l=en (accessed on 15 September 2025).
  53. Hong, Z.; Tang, H.; Liu, J.; Hong, W. Catalytic Combustion Heat Supply Linkage Ammonia Decomposition Hydrogen Production Device. CN Patent 119015872 A, 26 November 2024. Available online: https://www.lens.org/lens/patent/010-690-528-877-462/frontpage?l=en (accessed on 15 September 2025).
  54. Harumichi, N.; Hidekazu, A. Hydrogen Generating Apparatus. JP Patent P2010 180098A, 28 August 2013. Available online: https://www.lens.org/lens/patent/065-896-710-876-65X/frontpage?l=en (accessed on 15 September 2025).
  55. Susumu, H.; Chikashi, I.; Haruyuki, N.; Norihiko, N.; Hidekazu, A. Ammonia-Engine System. WO Patent 2010/058807 A1, 27 May 2010. Available online: https://www.lens.org/lens/patent/052-031-084-667-302/frontpage?l=en (accessed on 15 September 2025).
  56. Jung, H.S.; Eun, G.E.; Seo, B.; Shim, S.S. Catalyst for Ammonia Removal and Ammonia-Based Hydrogen Production Method using Same. KR Patent 10 2024 0010242, 23 January 2024. Available online: https://www.lens.org/lens/patent/198-860-912-645-102/frontpage?l=en (accessed on 15 September 2025).
  57. Kazuo, H. Solid Oxide Fuel Battery System, and Starting Method Thereof. JP Patent P2011 204418A, 13 October 2011. Available online: https://www.lens.org/lens/patent/148-508-136-257-011/frontpage?l=en (accessed on 15 September 2025).
  58. Lin, L.; Luo, J.; Jiang, L.; Chen, C.; Luo, Y.; Zhang, Q.; Lu, J. Efficient Hydrogenation System Adopting Photo-Thermal Power Generation. CN Patent 120332944 A, 18 July 2025. Available online: https://www.lens.org/lens/patent/078-631-633-385-985/frontpage?l=en (accessed on 15 September 2025).
  59. Ravi, R. Configurations and Methods of Hydrogen Fueling. WO Patent 2008/002593 A2, 3 January 2008. Available online: https://www.lens.org/lens/patent/070-839-154-131-664/frontpage?l=en (accessed on 15 September 2025).
  60. Li, S.; Yu, M. Devices and Methods for Hydrogen Generation via Ammonia Decomposition. U.S. Patent 10 906 804 B2, 2 February 2021. Available online: https://www.lens.org/lens/patent/046-715-067-176-122/frontpage?l=en (accessed on 15 September 2025).
  61. Douglas, W.J.; Colin, A.W. Catalytic Membrane Reactor, Methods of Making the Same and Methods of Using the Same for Dehydrogenation Reactions. U.S. Patent 2020/0269208 A1, 17 October 2021. Available online: https://www.lens.org/lens/patent/048-486-957-668-563/frontpage?l=en (accessed on 15 September 2025).
  62. Cui, L.; Li, N.; Cao, Q. Novel Efficient Ammonia Decomposition Hydrogen Production Equipment. CN Patent 113604813 A, 5 November 2021. Available online: https://www.lens.org/lens/patent/185-953-735-007-273/frontpage?l=en (accessed on 15 September 2025).
  63. Duane, A.G.; Steve, J.S. Production of Hydrogen by Autothermic Decomposition of Ammonia. U.S. Patent 2005/0037244 A1, 17 February 2005. Available online: https://www.lens.org/lens/patent/048-098-746-765-22X/frontpage?l=en (accessed on 15 September 2025).
  64. Laura, E.R.; Javier, L.V. System and Method for Ammonia Cracking. EP Patent 4 417 572 A1, 21 August 2024. Available online: https://www.lens.org/lens/patent/089-143-210-596-277/frontpage?l=en (accessed on 15 September 2025).
  65. Junji, O.; Masanori, Y.; Masaru, K.; Hideaki, T. Catalyst for Production of Hydrogen and Process for Producing Hydrogen Using the Catalyst, and Catalyst for Combustion of Ammonia, Process for Producing the Catalyst and Process for Combusting Ammonia Using the Catalyst. U.S. Patent 10 857 523 B2, 8 December 2020. Available online: https://www.lens.org/lens/patent/199-297-948-369-687/frontpage?l=en (accessed on 15 September 2025).
  66. David, P.; Thomas, S.B.R.; Carsten, K.R.; Paul, K.W. Ammonia Dehydrogenation. CN Patent 117693608 A, 12 March 2024. Available online: https://www.lens.org/lens/patent/107-511-461-333-508/frontpage?l=en (accessed on 15 September 2025).
  67. Hviid, C.C.; Tue, J.; Kehlet, N.J.; Ulrich, Q. Use of An Ammonia Storage Device in Production of Energy. EP Patent 1 728 290 B1, 10 December 2008. Available online: https://www.lens.org/lens/patent/023-687-058-682-015/frontpage?l=en (accessed on 15 September 2025).
  68. Sung, S.; Michael, L.; Li, Y. On-Board Vehicle Ammonia and Hydrogen Generation. EP Patent 3 607 182 B1, 27 October 2021. Available online: https://www.lens.org/lens/patent/054-973-214-874-329/frontpage?l=en (accessed on 15 September 2025).
  69. Jiang, L.; Luo, Y.; Chen, C.; Lin, X.; Lin, J. Ammonia Decomposition Apparatus and System and Hydrogen Production Method. U.S. Patent 11 084 012 B2, 10 August 2021. Available online: https://www.lens.org/lens/patent/184-633-335-656-187/frontpage?l=en (accessed on 15 September 2025).
  70. Joo, K.D. Continuous Production Type Hydrogen Extraction Apparatus for Carbon Nanotube Manufacturing Apparatus. KR Patent 10 2008 0008657, 25 April 2008. Available online: https://www.lens.org/lens/patent/093-863-562-843-403/frontpage?l=en (accessed on 15 September 2025).
  71. Pejman, A.; Stefan, T. A Zero-Emission Jet Engine Employing a Dual-Fuel Mix of Ammonia and Hydrogen using A Wave Rotor Reformer. WO Patent 2022/126248 A1, 23 June 2022. Available online: https://www.lens.org/lens/patent/160-556-588-371-369/frontpage?l=en (accessed on 15 September 2025).
  72. Yoshiyuki, H.; Yasuyuki, Y. Apparatus for Producing Inorganic Spheroidized Particle, and Method for Producing Inorganic Spheroidized Particle. JP Patent P2022 145242A, 27 July 2023. Available online: https://www.lens.org/lens/patent/177-712-553-298-359/frontpage?l=en (accessed on 15 September 2025).
  73. Hann, S.; Jang, H. Apparatus for Producing Hydrogen Gas from Ammonia Using Laser. U.S. Patent 2025/0197205 A1, 19 June 2025. Available online: https://www.lens.org/lens/patent/044-438-372-164-739/frontpage?l=en (accessed on 15 September 2025).
  74. Yasushi, Y.; Takeshi, K.; Jun, O.; Shiro, F.; Shigeki, K.; Shunichiro, K. Method and Apparatus for Removing Ammonia. JP Patent P2005 327638A, 24 November 2005. Available online: https://www.lens.org/lens/patent/100-330-633-195-82X/frontpage?l=en (accessed on 15 September 2025).
  75. Matthew, M. Hydrogen Gas Generation using Ammonia. EP Patent 4 570 949 A1, 18 June 2025. Available online: https://www.lens.org/lens/patent/128-822-038-125-066/frontpage?l=en (accessed on 15 September 2025).
  76. Luo, Y.; Ge, X.; Zhong, F.; Fang, H.; Jiang, Y.; Jiang, L. Perovskite Cathode Catalytic Material for Hydrogen Production Through Solid Oxide Ammonia Electrolysis and Preparation of Perovskite Cathode Catalytic Material. CN Patent 119956399 A, 9 May 2025. Available online: https://www.lens.org/lens/patent/130-177-422-639-726/frontpage?l=en (accessed on 15 September 2025).
  77. Yan, J.; Shi, M.; Bao, D.; Zhong, H.; Zhang, N.; Gao, R.; Kang, X. Monoatom and Nanoparticle Composite Material and Preparation Method and Application Thereof. CN Patent 116479465 A, 25 July 2023. Available online: https://www.lens.org/lens/patent/155-346-356-725-969/frontpage?l=en (accessed on 15 September 2025).
  78. Zhu, X.; Lee, J.-B.; Hong, Y.; Chen, G.; Zhu, Y. Electrochemical Catalysis Ammonia Decomposition Hydrogen Production Material and Preparation Method Thereof. CN Patent 119506969 A, 25 February 2025. Available online: https://www.lens.org/lens/patent/170-034-558-347-610/frontpage?l=en (accessed on 15 September 2025).
  79. Paolo, B.; Alessandro, T.; Claudio, B.; Adriana, S.; Stefano, C.; Marina, R.; Hamish, M.; Francesco, V.; Alessandro, B. On-Board Continuous Hydrogen Production via Ammonia Electrolysis, Corresponding Electrolyzers and a Method of Operating the Same. WO Patent 2009/024185 A1, 26 February 2009. Available online: https://www.lens.org/lens/patent/053-017-711-822-910/frontpage?l=en (accessed on 15 September 2025).
  80. Graves, J.E.; Bains, N.; Beddow, J.A.; Williams, S.M. Methods of Manufacturing Hydrogen. GB Patent 2571413 A, 28 August 2019. Available online: https://www.lens.org/lens/patent/177-941-792-342-15X/frontpage?l=en (accessed on 15 September 2025).
  81. Yang, E.; Kim, D.; Yoo, Y.; Ham, J.; Jeong, D.; Lee, J.; Jeong, S.; Yoon, D.; Bong, S. Ammonia Electrolysis Electrode and Hydrogen Production Equipment Containing Thereof. KR Patent 10 2024 0058258, 6 March 2025. Available online: https://www.lens.org/lens/patent/071-075-512-606-826/frontpage?l=en (accessed on 15 September 2025).
  82. Lee, S.H.; Kim, U.J. Method and Device for Synthesizing Nickel Catalyst to Produce Hydrogen by Electrolysis of Ammonia. KR Patent 10 2025 0101330, 6 August 2025. Available online: https://www.lens.org/lens/patent/082-211-262-797-449/frontpage?l=en (accessed on 15 September 2025).
  83. Xie, W.; Mao, Y.; Xue, Y.; Yang, L. Preparation Method and Application of Nickel-Copper Alloy Nanoparticle Catalyst. CN Patent 119843312 A, 18 April 2025. Available online: https://www.lens.org/lens/patent/169-961-957-972-458/frontpage?l=en (accessed on 15 September 2025).
  84. Dong, B.; Tian, T.; Teng, Y. Method for Decomposing Liquid Ammonia to Prepare Hydrogen Through Electrochemical Technology. CN Patent 106319555 A, 26 June 2018. Available online: https://www.lens.org/lens/patent/185-454-758-868-336/frontpage?l=en (accessed on 15 September 2025).
  85. Yan, W.; Yu, Z.; Zhang, C.; Zhang, H.; Ma, J. System and Method for Making Hydrogen Through Ammonia Electrolysis and Applying Hydrogen to Coal Liquefaction. CN Patent 108360011 A, 3 August 2018. Available online: https://www.lens.org/lens/patent/090-646-375-880-794/frontpage?l=en (accessed on 15 September 2025).
  86. Yan, W.; Yu, Z.; Zhang, C.; Zhang, H.; Ma, J. System for Ammonia Electrolytic Hydrogen Production is Used for Coal Liquefaction. CN Patent 208328127 U, 4 January 2019. Available online: https://www.lens.org/lens/patent/048-251-177-485-145/frontpage?l=en (accessed on 15 September 2025).
  87. Yan, W.; Zhang, C.; Yu, Z.; Zhang, H.; Zhang, B. System for Ammonia Electrolysis is Used for Waste Water Treatment and Fuel Cell Automobile Hydrogen Supply. CN Patent 208183081 U, 4 December 2018. Available online: https://www.lens.org/lens/patent/159-396-478-125-022/frontpage?l=en (accessed on 15 September 2025).
  88. Jiang, L.; Luo, Y.; Chen, C.; Zhan, Y. Ammonia Electrolysis Hydrogen Production System. CN Patent 210736904 U, 12 June 2020. Available online: https://www.lens.org/lens/patent/050-228-849-677-729/frontpage?l=en (accessed on 15 September 2025).
  89. Zhao, J.; Wang, X.; You, Y.; Yin, X.; Tang, H.; Xia, D. NiCu-NH2-BDC Electrode, Preparation Method Thereof and Application of NiCu-NH2-BDC Electrode in Hydrogen Production by Electrolysis of Ammonia. CN Patent 115786967 A, 17 May 2024. Available online: https://www.lens.org/lens/patent/075-332-202-310-368/frontpage?l=en (accessed on 15 September 2025).
  90. Joo, J.H.; Yu, J.H.; Yoon, H.C.; Kim, J.N.; Woo, Y.M.; Jang, J.Y.; Woo, S.K.; Han, I.S.; Kim, S.D.; Kim, S.Y.; et al. Ammonia Based Reversible Fuel Cell System and Method. KR Patent 10 1340492, 11 December 2013. Available online: https://www.lens.org/lens/patent/065-039-541-842-208/frontpage?l=en (accessed on 15 September 2025).
  91. Sai, P.K.; Lee, K.; Bae, J.; Jung, W. Method for Producing Compressed Hydrogen using Electrochemical Systems. WO Patent 2022/010863 A1, 13 January 2022. Available online: https://www.lens.org/lens/patent/031-195-648-528-885/frontpage?l=en (accessed on 15 September 2025).
  92. Matthew, D.; Nicholas, F.; Jason, D.; Jin, D. Electrochemical Hydrogen Production Utilizing Ammonia. AU Patent 2021/468503 A1, 14 March 2024. Available online: https://www.lens.org/lens/patent/026-902-875-540-138/frontpage?l=en (accessed on 15 September 2025).
  93. Matthew, D. Electrochemical Hydrogen Production via Ammonia Cracking. WO Patent 2024/129246 A1, 20 June 2024. Available online: https://www.lens.org/lens/patent/191-945-962-254-167/frontpage?l=en (accessed on 15 September 2025).
  94. Zhang, X.; Zhang, N.; Shi, M.; Bao, D.; Chen, H. Production System and Production Method for Electrochemical Hydrogen Production. CN Patent 111321422 A, 17 August 2021. Available online: https://www.lens.org/lens/patent/092-109-324-278-428/frontpage?l=en (accessed on 15 September 2025).
  95. Kim, G.T.; Kim, J.W.; Yang, Y.J. Composite Electrode Separator and Composite Hydrogen Production Stack Including Same. KR Patent 10 2023 0131747, 14 September 2023. Available online: https://www.lens.org/lens/patent/034-544-687-341-038/frontpage?l=en (accessed on 15 September 2025).
  96. Kim, W.; Park, C.; Kwak, H. Non-Aqueous Solar Power Electrochemical Cell using Ammonia Oxidation and Hydrogen Generation System Containing the Same. KR Patent 10 2602035, 14 November 2023. Available online: https://www.lens.org/lens/patent/038-914-392-605-420/frontpage?l=en (accessed on 15 September 2025).
  97. Lee, H.; Kim, M.; Han, Y. A Method of Liquefying Ammonia at Room Temperature and Pressure Pressure and an Ammonia Electrolysis Device to Produce High Purity Hydrogen using the Same. KR Patent 10 2025 0077260, 30 March 2025. Available online: https://www.lens.org/lens/patent/066-087-401-923-551/frontpage?l=en (accessed on 15 September 2025).
  98. Sai, P.K.; Lee, K.-H.; Pei, Z.; Jung, W.-C. Method for Producing Compressed Hydrogen using Electrochemical System. CN Patent 116472365 A, 21 July 2023. Available online: https://www.lens.org/lens/patent/095-474-887-902-858/frontpage?l=en (accessed on 15 September 2025).
  99. Fan, L.; Xu, C.; Wei, Y.; Wu, Y.; Mao, Y.; Zhang, H.; Xu, J. Hybrid Power System of Liquid Ammonia Hydrogen Production Ship. CN Patent 114104242 A, 1 March 2022. Available online: https://www.lens.org/lens/patent/002-000-497-347-344/frontpage?l=en (accessed on 15 September 2025).
  100. Luo, Y.; Jiang, L.; Chen, C.; Zhan, Y. Ammonia Electrolysis Hydrogen Production Device. CN Patent 110295372 A, 12 September 2023. Available online: https://www.lens.org/lens/patent/042-075-717-019-535/frontpage?l=en (accessed on 15 September 2025).
  101. Luo, Y.; Jiang, L.; Chen, C.; Zhan, Y. Ammonia Electrolysis Hydrogen Production Device. CN Patent 210736903 U, 12 June 2020. Available online: https://www.lens.org/lens/patent/022-850-867-119-557/frontpage?l=en (accessed on 15 September 2025).
  102. Shigeru, M.; Naoya, I. System for Decomposing Ammonia. JP Patent P2009 67650A, 2 April 2009. Available online: https://www.lens.org/lens/patent/156-553-895-995-042/frontpage?l=en (accessed on 15 September 2025).
  103. Li, C.; Liu, J.; Liu, C.; Gao, B.; Zhu, M.; Zou, Z. Method for Producing Hydrogen by Decomposing Ammonia Through Efficient Light Driving of Gamma Aluminum Oxide Modified by Metal Nanoclusters. CN Patent 116099531 A, 27 June 2025. Available online: https://www.lens.org/lens/patent/125-515-719-547-492/frontpage?l=en (accessed on 15 September 2025).
  104. Xie, W.; Zhao, N.; Jin, Y.; Zhu, A. Z-Type Heterojunction Photocatalyst Constructed by N-Co-S Electron Bridge as well as Preparation Method and Application of Z-Type Heterojunction Photocatalyst. CN Patent 120306011 A, 19 September 2025. Available online: https://www.lens.org/lens/patent/101-463-850-614-125/frontpage?l=en (accessed on 15 September 2025).
  105. Simon, S.G. Fuel-Cell Vehicle with Ultraviolet Ammonia Cracker. CA Patent 2 403 741, 22 November 2011. Available online: https://www.lens.org/lens/patent/046-987-806-669-393/frontpage?l=en (accessed on 15 September 2025).
  106. Simon, S.G. Electromagnetic Hydrogen Generation Method and System. CA Patent 2 403 738, 18 November 2008. Available online: https://www.lens.org/lens/patent/112-013-079-636-70X/frontpage?l=en (accessed on 15 September 2025).
  107. Yu, W.; Lian, Z.; Zhao, F.; Sun, A. Plasma-based Ammonia Catalytic Hydrogen Production-Ignition Integrated System and Method. CN Patent 114294130 A, 14 October 2022. Available online: https://www.lens.org/lens/patent/195-416-916-206-123/frontpage?l=en (accessed on 15 September 2025).
  108. Zhang, H.; Shi, X.; Wang, K.; Gang, Y.; Bao, S.; Zhao, Z.; Long, Y.; Yan, J. System and Method for Rapidly and Efficiently Decomposing Ammonia to Produce Hydrogen Through Cooperation of Plasma Catalysis. CN Patent 119701824 A, 19 September 2025. Available online: https://www.lens.org/lens/patent/109-182-117-782-839/frontpage?l=en (accessed on 15 September 2025).
  109. Mikhail, M.; Jerome, A. Hydrogen Production Process and Catalyst using Plasma to Catalyze Ammonia Decomposition. CN Patent 119212789 A, 27 December 2024. Available online: https://www.lens.org/lens/patent/076-093-325-362-089/frontpage?l=en (accessed on 15 September 2025).
  110. Shi, X.; Xu, H.; Qian, W.; Hu, Z. Ammonia Gas Engine Plasma Online Reforming Hydrogen Production Jet Ignition System and Using Method. CN Patent 118462383 A, 9 August 2024. Available online: https://www.lens.org/lens/patent/192-127-760-621-469/frontpage?l=en (accessed on 15 September 2025).
  111. Zhao, N.; Tian, H. Device for Producing Hydrogen by Plate-Hole DBD Plasma Cooperating with Proton Exchange Membrane Ammonia Gas. CN Patent 116854034 A, 25 April 2025. Available online: https://www.lens.org/lens/patent/096-961-628-539-577/frontpage?l=en (accessed on 15 September 2025).
  112. Zhao, N.; Tian, H. Coaxial DBD Plasma and Proton Exchange Membrane Ammonia Hydrogen Production Device. CN Patent 116854033 A, 10 October 2023. Available online: https://www.lens.org/lens/patent/158-948-312-330-559/frontpage?l=en (accessed on 15 September 2025).
  113. Xu, S.; Lyu, L.; Wu, X.; Ding, L.; Chen, L. Layered Reactor for Hydrogen Production and Synchronous Separation Through Plasma Catalytic Ammonia Decomposition. CN Patent 118807614 A, 22 October 2024. Available online: https://www.lens.org/lens/patent/023-702-798-986-623/frontpage?l=en (accessed on 15 September 2025).
  114. Li, G.; Zhang, Y.; Zhang, Z.; Xu, W.; Ruan, Z. Ammonia Reforming and Ammonia Cracking Hydrogen Production System and Method. CN Patent 114852959 A, 9 April 2024. Available online: https://www.lens.org/lens/patent/063-315-722-613-776/frontpage?l=en (accessed on 15 September 2025).
  115. Tang, Q.; Zhang, S.; Zhu, X.; Yao, M. Device and Method for Producing Hydrogen by Cracking Ammonia Through Microwave Resonance Plasma Torch. CN Patent 119926328 A, 6 May 2025. Available online: https://www.lens.org/lens/patent/121-207-513-271-89X/frontpage?l=en (accessed on 15 September 2025).
  116. Ryoichi, S.; Sho, M.; Kazuya, N.; Rei, K.; Tetsuya, S. Fuel Cell System. JP Patent P2024 82777A, 20 June 2024. Available online: https://www.lens.org/lens/patent/004-671-687-163-925/frontpage?l=en (accessed on 15 September 2025).
  117. Zhao, N.; Wang, J.; Tian, H. Airflow Self-Driven Rotary Sliding Arc Plasma Ammonia Hydrogen Burner. CN Patent 120212486 A, 23 September 2025. Available online: https://www.lens.org/lens/patent/170-323-279-852-842/frontpage?l=en (accessed on 15 September 2025).
  118. Tomonori, M. Transportation Device Equipped with Fuel Cell System. U.S. Patent 11 014 809 B2, 25 May 2021. Available online: https://www.lens.org/lens/patent/035-780-558-701-923/frontpage?l=en (accessed on 15 September 2025).
  119. Tomohiro, O.; Yunosuke, K.; Shigeto, A.; Kouki, S.; Nobushi, K.; Yukio, H. Ammonia Decomposition Apparatus and Hydrogen Gas Production System. JP Patent P2022 108381A, 26 July 2022. Available online: https://www.lens.org/lens/patent/199-503-064-680-810/frontpage?l=en (accessed on 15 September 2025).
  120. Tomohiro, O.; Yunosuke, K.; Shigeto, A.; Kouki, S.; Nobushi, K.; Yukio, H. Ammonia Decomposition Device and Hydrogen Gas Production System. JP Patent P2022 168935A, 9 November 2022. Available online: https://www.lens.org/lens/patent/129-905-047-107-337/frontpage?l=en (accessed on 15 September 2025).
  121. Zhang, X.; Bao, D.; Zhong, H.; Shi, M.; Liu, J.; Huang, G. Method, Device and Catalyst for Producing Hydrogen by Ammonolysis under Room-Temperature and Room-Pressure Conditions. CN Patent 115646489 A, 31 May 2024. Available online: https://www.lens.org/lens/patent/101-233-650-582-647/frontpage?l=en (accessed on 15 September 2025).
  122. Yoshitsugu, K.; Takayuki, I.; Hiroki, M. Hydrogen Producing Method. JP Patent P2010 265138A, 25 November 2010. Available online: https://www.lens.org/lens/patent/160-071-817-530-111/frontpage?l=en (accessed on 15 September 2025).
  123. Feng, S.; Gao, W.; Guo, J.; Chen, P. Chemical Chain Ammonia Decomposition Method. CN Patent 117735479 A, 22 March 2024. Available online: https://www.lens.org/lens/patent/171-107-462-873-318/frontpage?l=en (accessed on 15 September 2025).
  124. Chihiro, H.; Masatoshi, M.; Atsushi, Y. Gas Decomposition Electric Power Generation System. JP Patent P2013 78716A, 17 November 2015. Available online: https://www.lens.org/lens/patent/171-027-875-871-599/frontpage?l=en (accessed on 15 September 2025).
  125. James, M.; Arne, B.; Matthias, G. Ammonia Fueled SOFC System. U.S. Patent 2014/0072889 A1, 23 December 2014. Available online: https://www.lens.org/lens/patent/044-163-168-571-388/frontpage?l=en (accessed on 15 September 2025).
  126. Lim, D.-K.; Blake, P.A.; Sossina, M.H.C.; Calum, C.R.I.; Strahinja, Z. Solid Acid Electrochemical Cells for the Production of Hydrogen. U.S. Patent 2023/0366109 A1, 16 November 2023. Available online: https://www.lens.org/lens/patent/024-852-021-494-275/frontpage?l=en (accessed on 15 September 2025).
  127. Stijn, V.D.; Walter, V.; Gleb, V. Process to Conduct an Ammonia Cracking Reaction in A Fluidized Bed Reactor. U.S. Patent 2024/0425368 A1, 26 December 2024. Available online: https://www.lens.org/lens/patent/079-812-193-476-160/frontpage?l=en (accessed on 15 September 2025).
  128. Ii, W.J.L. System and Method for Hydrogen Production from Ammonia using Tandem Dual Catalyst Units. CN Patent 119677689 A, 21 March 2025. Available online: https://www.lens.org/lens/patent/131-601-104-759-876/frontpage?l=en (accessed on 15 September 2025).
  129. Hiroyasu, K.; Hideaki, S. Reforming System. JP Patent P2021 17389A, 15 February 2021. Available online: https://www.lens.org/lens/patent/165-513-426-748-591/frontpage?l=en (accessed on 15 September 2025).
  130. Shinji, K.; Tomonori, M.; Yuya, T.; Tatsuya, I. Fuel-Reforming Device and Fuel-Reforming Method. WO Patent 2020/217998 A1, 29 October 2020. Available online: https://www.lens.org/lens/patent/056-046-403-032-097/frontpage?l=en (accessed on 15 September 2025).
  131. Choi, H.C. Apparatus of Producing Hydrogen from Ammonia and Method of Producing Hydrogen using the Same. KR Patent 10 2024 0062775, 9 May 2024. Available online: https://www.lens.org/lens/patent/073-456-506-092-971/frontpage?l=en (accessed on 15 September 2025).
  132. Choi, H.C. Apparatus of Producing Hydrogen from Ammonia and Method of Producing Hydrogen using the Same. KR Patent 10 2023 0084018, 12 June 2023. Available online: https://www.lens.org/lens/patent/116-784-553-023-339/frontpage?l=en (accessed on 15 September 2025).
  133. Hong, Z.; Lin, X.; Hong, W. Quick Starting System for Hydrogen Production Through Ammonia Decomposition. CN Patent 119113966 A, 13 December 2024. Available online: https://www.lens.org/lens/patent/185-229-833-973-195/frontpage?l=en (accessed on 15 September 2025).
  134. Han, X.; Deng, L.; Yu, L.; Zhao, B.; Shen, F. Method and System for Producing Hydrogen Through Ammonia Decomposition. CN Patent 119858897 A, 22 April 2025. Available online: https://www.lens.org/lens/patent/129-917-177-597-416/frontpage?l=en (accessed on 15 September 2025).
  135. Spatolisano, E.; Pellegrini, L.A.; de Angelis, A.R.; Cattaneo, S.; Roccaro, E. Ammonia as a Carbon-Free Energy Carrier: NH3 Cracking to H2. Ind. Eng. Chem. Res. 2023, 62, 10813–10827. [Google Scholar] [CrossRef] [Scilit]
  136. Gorbanev, Y.; Fedirchyk, I.; Bogaerts, A. Plasma Catalysis in Ammonia Production and Decomposition: Use it, or lose it? Curr. Opin. Green Sustain. Chem. 2024, 47, 100916. [Google Scholar] [CrossRef] [Scilit]
  137. Zuniga, J.; Anello, G.; Aragón, J.J.; de Guereñu, M.D.M.D.; Arratibel, A.; Marino, G.; Italiano, C.; Vita, A.; Gallucci, F. Enhanced ammonia decomposition in a structured membrane reactor using a Ru-coated SiC open-cell foam and a Pd-based membrane. Int. J. Hydrogen Energy 2025, 153, 150217. [Google Scholar] [CrossRef] [Scilit]
  138. Maleki, H.; Bertola, V. Electrification of Ammonia Cracking for On-demand Hydrogen Production: CFD Modeling. Next Energy 2025, 8, 100324. [Google Scholar] [CrossRef] [Scilit]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.