Skip to Content
ChemistryChemistry
  • Article
  • Open Access

23 June 2026

20 Pages

Catalytic Rearrangement of β-Pinene Epoxide to Perillyl Alcohol on Ammonium Phosphomolybdate Anchored to N-Basylous AC: Solvent Effect and Kinetic Characteristics

,
,
,
,
and
1
College of Physics and Chemistry, Hunan First Normal University, Changsha 410205, China
2
National & Local Joint Engineering Laboratory for New Petro-Chemical Materials and Fine Utilization of Resources, College of Chemistry and Chemical Engineering, Hunan Normal University, Changsha 410081, China
3
College of Material Science and Engineering, Central South University of Forestry and Technology, Changsha 410205, China
*
Authors to whom correspondence should be addressed.

Abstract

Perillyl alcohol, a rare monoterpenoid, can be widely used in chemical, agriculture, and food industries and shows promise in medicine as an anticancer agent. The artificial synthesis of perillyl alcohol from β-pinene epoxide using inexpensive and abundant turpentine is chosen for improving its pharmaceutical and industrial applications. This work presents a green and sustainable catalytic process for the rearrangement of β-pinene epoxide to perillyl alcohol. A novel ammonium phosphomolybdate solid acid (AC-COIMI-NH4PMo) was built via phosphomolybdic acid chemisorption onto an N-basylous site of imidazolized activated carbon followed by ammonia fumigation, which exhibits outstanding catalytic performance in the rearrangement of β-pinene epoxide to perillyl alcohol in nitromethane under mild conditions. At 80 °C over 80 min, nearly complete conversion of the epoxide is achieved with a perillyl alcohol selectivity of 77.3%. Moreover, the used catalyst can be readily recycled after washing with hot nitromethane. The favorable proton-donating capacity of nitromethane for the rearrangement and the comparison of adsorption energies between substrates and main products on ammonium phosphomolybdate are revealed through DFT calculation. Kinetic analysis based on the Langmuir adsorption model indicates that the surface reaction of strongly adsorbed β-pinene epoxide is a rate-determining step and follows a zero-order reaction process; the activation energy is 29.64 kJ/mol within the temperature range of 50–80 °C. Finally, a parallel catalytic rearrangement mechanism is proposed, and an eight-step reaction pathway toward perillyl alcohol is elaborated for β-pinene epoxide conversion on AC-COIMI-NH4PMo.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.