Skip to Content
You are currently on the new version of our website. Access the old version .
  • Article
  • Open Access

31 December 2012

Dye Uptake and Thermal Behavior of Fibre Grade PET Containing Boltorn H40 as a Nanomaterial

,
and
Department of Polymer Eng. and Colour Tech., Amirkabir University of Technology Hafez Street, Tehran 1591634311, Iran
*
Author to whom correspondence should be addressed.

Abstract

In this work, various loads of nanomaterials and aliphatic dendritic polymerswere mixed with fibre grade PET (Polyethylene terephthalate) to study its dye ability, thermal and thermal-mechanical properties. A twin screw extruder equipped with sheet (profile) die was used for mixing the compounds. Thermal behaviour of the neat PET and the compounded sheet samples were studied using differential scanning calorimeter and dynamic mechanical thermal analysis. It was observed that the Tg of samples decreased gradually by increasing the load of Boltorn H40 as a nanomaterial additive while the Tm remained almost the same. The difference between the glass transition temperature for neat PET and the compounded sample including 3% additive was about seven degrees. In spite of the decline in Tg, the moduli of samples containing additive increased as revealed by DMTA analysis. The presence of this dendritic polymer in compounded PET acted as a cross linking or antiplastisizing agent and made the fibre grade PET compounds more compact than pure PET. So the disperse dye molecules neither were able to stay between the molecules of compounded PET nor were able to trap between the dendritic branches.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.