Skip to Content
  • Article
  • Open Access

31 December 2018

Preparation and Characterization of the Silk Fibroin 3D Scaffolds with Porous and Interconnected Structure

,
and
1
Soochow University, Renai Road, Suzhou 215123, China
2
School of Materials, The University of Manchester, Manchester M13 9PL, UK
*
Authors to whom correspondence should be addressed.

Abstract

Silk fibroin (SF) is wildly used in the field of biomedical science. Considering the contradiction between suitable pore size and outstanding mechanical properties, this research focused on the topic of preparing the 3D scaffolds with large pore sizes and high interconnectivity. For preparing the silk fibroin 3D scaffold samples, three kinds of porogens were applied in two methods which paraffin spheres were used in freeze-drying. Sodium chloride (NaCl) and sodium carbonate (Na2CO3) were used in leaching respectively. Different pore size of porogens were used to control the pore size and porosities of prepared scaffold samples. Some basic properties of scaffold samples were characterized including surface morphology, chemical structure, porosity and mechanical performance. The best porosity of sample reached to 93% in the research.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.