Skip to Content
You are currently on the new version of our website. Access the old version .
  • Article
  • Open Access

27 June 2024

15 Pages

Development of Foam Composites from Flax Gum-Filled Epoxy Resin

,
,
,
,
,
,
and
1
UCEIV, UR 4492, Université du Littoral-Côte d’Opale, 59140 Dunkerque, France
2
LaMCoS, INSA-Lyon, CNRS UMR 5259, 69621 Villeurbanne, France
3
UDSMM, UR 4476, Université du Littoral-Côte d’Opale, 59140 Dunkerque, France
4
IRDL, UMR 6027, Université de Bretagne-Sud, 56321 Lorient, France

Abstract

In the present work, an innovative range of foams based on flax gum-filled epoxy resin was developed, reinforced or not by flax fibers. Foams and composites with different gum and epoxy resin contents were produced and their mechanical and thermal performances were characterized. To enhance the organic flax gum filler’s cross-linking, we exploited the oxidized components’ reactivity with the amine hardener (isophorone diamine). We compared the materials obtained with those derived from the native components. The flax gum and fibers were primarily characterized by chemical analysis, NMR, and FTIR to evaluate the mild oxidation of the native materials. The formation of chemical bonds between the oxidized polymer chains, epoxy resin, and hardener was evidenced by FTIR, and the materials were then studied by SEM and X-ray computed micro-tomography (CT) and submitted to mechanical and thermal tests. The relevance of the oxidation treatment was highlighted through a significant increase in density and mechanical performance (+36% and +81%, respectively, for the 100% flax gum material). The positive effect of the flax fibers on homogeneity evidenced through micro-CT analysis was also clearly addressed. This set of promising results paves the way for the future development of fully flax-based insulation composite materials.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.