Skip to Content
MDPIMDPI

Advanced

GelsGels
PDF
  • Correction
  • Open Access

26 October 2026

3 Pages

Correction: Tayari et al. Sol–Gel Synthesis and Comprehensive Study of Structural, Electrical, and Magnetic Properties of BiBaO3 Perovskite. Gels 2025, 11, 450

,
,
,
,
,
,
and
1
I3N-Aveiro, Department of Physics, University of Aveiro, 3810-193 Aveiro, Portugal
2
TEMA-Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, 3810-193 Aveiro, Portugal
*
Author to whom correspondence should be addressed.
Gels2026, 12(11), 965;https://doi.org/10.3390/gels12110965
This article belongs to the Section Gel Chemistry and Physics
Version Notes
Order Reprints
In the original publication [1], some in-text citations were found to be insufficiently aligned with the specific statements they were intended to support. These issues were limited exclusively to citation relevance and did not affect the scientific content, data interpretation, results, or conclusions of the article.
In response to the Academic Editor’s recommendations, the authors conducted a comprehensive, fully manual, line-by-line review of the entire manuscript. Some references in Section 1 Introduction were replaced with more suitable, authoritative, and field-relevant references.
Following this correction, 25 references in the original manuscript (No. 4–21, 25, 28, 32, 54, 60, 71, and 73) were replaced by new references [2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26] in the same positions, while all other references remained unchanged. The total number of references is unchanged at 86. All these references have been carefully selected to ensure direct relevance to the corresponding statements in the text and have been correctly placed in the same locations as in the original publication and the current version of the paper throughout the manuscript. The same numbering and citation locations have been maintained between the published version and the current version.
All in-text citations have been manually re-mapped to ensure that each reference now directly and accurately supports the associated statement. All remaining references were thoroughly verified and confirmed to be relevant and technically justified.
No changes were made to the manuscript text, figures, tables, scientific interpretations, results, or conclusions. The scope, structure, and scientific content of the article remain identical to the originally published version. All corrections are strictly limited to citation relevance, accuracy, and traceability.
The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has been updated accordingly.

References

  1. Tayari, F.; Nassar, K.I.; Carvalho, J.P.; Teixeira, S.S.; Hammami, I.; Gavinho, S.R.; Graça, M.P.F.; Valente, M.A. Sol–Gel Synthesis and Comprehensive Study of Structural, Electrical, and Magnetic Properties of BiBaO3 Perovskite. Gels 2025, 11, 450. [Google Scholar] [CrossRef] [Scilit] [PubMed]
  2. Veerapandiyan, V.; Benes, F.; Gindel, T.; Deluca, M. Strategies to improve the energy storage properties of perovskite lead-free relaxor ferroelectrics: A review. Materials 2020, 13, 5742. [Google Scholar] [CrossRef] [Scilit] [PubMed]
  3. Aftab, S.; Nawaz, T.; Bilal Tahir, M. Recent development in shape memory based perovskite materials for energy conversion and storage applications. Int. J. Energy Res. 2021, 45, 20545–20558. [Google Scholar] [CrossRef] [Scilit]
  4. Zhang, C.; Kuang, D.B.; Wu, W.Q. A review of diverse halide perovskite morphologies for efficient optoelectronic applications. Small Methods 2020, 4, 1900662. [Google Scholar] [CrossRef] [Scilit]
  5. Li, M.; Tian, T.; Zeng, Y.; Zhu, S.; Lu, J.; Yang, J.; Li, G. Individual cloud-based fingerprint operation platform for latent fingerprint identification using perovskite nanocrystals as eikonogen. ACS Appl. Mater. 2020, 12, 13494–13502. [Google Scholar] [CrossRef] [Scilit] [PubMed]
  6. Dijith, K.S.; Vijayan, S.; Prabhakaran, K.; Surendran, K.P. Conducting La0.5Sr0.5CoO3−δ foams for harsh condition microwave shielding. J. Ind. Eng. Chem. 2019, 78, 330–337. [Google Scholar] [CrossRef] [Scilit]
  7. Gao, L.; Zhang, R.; Wei, C.; Yin, Y.; Zhang, H. The dielectric and microwave absorption properties variation with temperature of La0.5Sr0.5CoO3 ceramics and improved microwave absorption by FSS. Ceram. Int. 2021, 47, 26430–26437. [Google Scholar] [CrossRef] [Scilit]
  8. Eirís, A.; Ramírez, L.; Couceiro, I.; Fernández-Fidalgo, J.; París, J.; Nogueira, X. MLS-SPH-ALE: A Review of Meshless-FV Methods and a Unifying Formulation for Particle Discretizations: A. Eirís et al. Arch. Comput. Methods Eng. 2023, 30, 4959–4981. [Google Scholar]
  9. Schmidt, F.; Ledermann, L.; Schäffer, A.; Snaith, H.J.; Lenz, M. Rapid sequestration of perovskite solar cell-derived lead in soil. J. Hazard. Mater. 2022, 436, 128995. [Google Scholar] [CrossRef] [Scilit] [PubMed]
  10. Jaramillo-Fierro, X.; Gaona, S.; Ramón, J.; Valarezo, E. Porous geopolymer/ZnTiO3/TiO2 composite for adsorption and photocatalytic degradation of methylene blue dye. Polymers 2023, 15, 2697. [Google Scholar] [CrossRef] [Scilit] [PubMed]
  11. Cheng, Y.; Wang, K.; Li, P.; Guo, H.; Yan, B.; Chen, D.; Zhao, W. A porous geopolymer containing Ti-bearing blast furnace slag: Synthesis, characterization, and adsorption-photodegradation studies towards methylene blue removal under visible light condition. Molecules 2023, 28, 3673. [Google Scholar] [CrossRef] [Scilit] [PubMed]
  12. Zhao, S.; Fu, S.; He, P.; Cui, J.; Yu, X.; Liang, J.; Zhou, Y. Geopolymer-encapsulated cesium lead bromide perovskite nanocrystals for potential display applications. ACS Appl. Nano Mater. 2020, 3, 11695–11700. [Google Scholar] [CrossRef] [Scilit]
  13. Aparicio, J.D.; Raimondo, E.E.; Saez, J.M.; Costa-Gutierrez, S.B.; Álvarez, A.; Benimeli, C.S.; Polti, M.A. The current approach to soil remediation: A review of physicochemical and biological technologies, and the potential of their strategic combination. J. Environ. Chem. Eng. 2022, 10, 107141. [Google Scholar] [CrossRef] [Scilit]
  14. Li, H.; Yang, B.S. Model evaluation of particle breakage facilitated process intensification for Mixed-Suspension-Mixed-Product-Removal (MSMPR) crystallization. Chem. Eng. Sci. 2019, 207, 1175–1186. [Google Scholar] [CrossRef] [Scilit]
  15. Zai, H.; Ma, Y.; Chen, Q.; Zhou, H. Ion migration in halide perovskite solar cells: Mechanism, characterization, impact and suppression. J. Energy Chem. 2021, 63, 528–549. [Google Scholar] [CrossRef] [Scilit]
  16. Rendón-Angeles, J.C.; Matamoros-Veloza, Z.; Montoya-Cisneros, K.L.; López Cuevas, J.; Yanagisawa, K. Synthesis of perovskite oxides by hydrothermal processing—From thermodynamic modelling to practical processing approaches. In Perovskite Materials: Synthesis, Characterisation, Properties, and Applications (Chapter 2). IntechOpen 2016. [Google Scholar] [CrossRef] [Scilit] [PubMed][Green Version]
  17. Dong, Y. Redox enhanced slow ion kinetics in oxide ceramics. J. Am. Ceram. Soc. 2024, 107, 1905–1916. [Google Scholar] [CrossRef] [Scilit]
  18. Zhou, L.; Zhou, F.; Ying, S.; Li, S. Study on water and salt migration and deformation properties of unsaturated saline soil under a temperature gradient considering salt adsorption: Numerical simulation and experimental verification. Comput. Geotech. 2021, 134, 104094. [Google Scholar] [CrossRef] [Scilit]
  19. Lai, Y.; Wen, W.; Pei, W.; Wan, X. A novel transport model to predict the moisture-heat-gas-salt behavior in unsaturated saline soil under evaporation. J. Hydrol. 2021, 603, 127052. [Google Scholar] [CrossRef] [Scilit]
  20. Yadav, S.K.; Hemalatha, J. Synthesis and characterization of magnetoelectric Ba2Zn2Fe12O22–PbZr0.52Ti0.48O3 electrospun core–shell nanofibers for the AC/DC magnetic field sensor application. Appl. Phys. A 2024, 130, 67. [Google Scholar] [CrossRef] [Scilit]
  21. Thakur, P.; Sharma, N.; Pathak, D.; Sharma, P.; Kishore, K.; Dhar, S.; Lal, M. State-of-art review on smart perovskites materials: Properties and applications. Emergent Mater. 2024, 7, 667–694. [Google Scholar] [CrossRef] [Scilit]
  22. Varignon, J. Origin of superconductivity in hole doped SrBiO3 bismuth oxide perovskite from parameter-free first-principles simulations. npj Comput. Mater. 2023, 9, 30. [Google Scholar] [CrossRef] [Scilit]
  23. Bouwmeester, R.L.; Brinkman, A. BaBiO3—From single crystals towards oxide topological insulators. Rev. Phys. 2021, 6, 100056. [Google Scholar] [CrossRef] [Scilit]
  24. Ateia, E.E.; Reda, M.; El-Dek, S.I.; Arman, M.M. A comparative approach for estimating microstructural characteristics of BaTi1−xZrxO3 (0.0 ≤ x ≤ 0.3) nanoparticles via X-ray diffraction patterns. J. Sol-Gel Sci. Technol. 2024, 110, 887–899. [Google Scholar] [CrossRef] [Scilit]
  25. Chun, J.; Heo, J.; Lee, K.; Ye, B.U.; Kang, B.S.; Yoon, S.H. Thermal activation energy on electrical degradation process in BaTiO3 based multilayer ceramic capacitors for lifetime reliability. Sci. Rep. 2024, 14, 616. [Google Scholar] [CrossRef] [Scilit] [PubMed]
  26. Khosrozadeh, M.; Mabhouti, K.; Norouzzadeh, P.; Naderali, R. Complex impedance spectroscopy, dielectric response, and magnetic properties of the La0.7Sr0.3BO3 (B = Mn, Fe, Co, or Ni) perovskite oxides. Ceram. Int. 2024, 50, 315–328. [Google Scholar] [CrossRef] [Scilit]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

Article Metrics

Citations

Article Access Statistics

Journal Statistics
Multiple requests from the same IP address are counted as one view.
Artificial Intelligence-Assisted Design and Optimization of AMP–Re(CO)3 (Nano)Microgel Systems: A New Perspective in Combating Antimicrobial Resistance
Previous
Effects of Konjac Glucomannan-Based Double Emulsions as Palm Oil Substitutes on the Stability, Texture, and Quality of Functional Ice Cream
Next