Abstract
The cylindrical hydrocyclone can be regarded as a special-shaped hydrocyclone comprising entirely cylindrical sections without conical sections, featuring a unique flat-bottom design combined with central discharge, which promotes substantial particle circulation flow in the separation chamber, directly affecting separation performance. A validated TFM model is employed to investigate the flow field and particle motion behavior in the cylindrical hydrocyclone. The results indicate that the distributions of tangential velocity, radial velocity, pressure, and pressure gradient in the cylindrical hydrocyclone are consistent with patterns observed in the conventional hydrocyclone. The flat-bottom design combined with the central discharge configuration of the cylindrical hydrocyclone results in two distinct axial velocity transitions in the bottom region, forming downward axial velocity flow around the air core. Accordingly, particles moving toward the spigot must pass through the internal swirling flow region, facilitating the fine particles entrained by the coarse particles to enter the internal swirling flow, reducing the misplacement of fine particles in the underflow. Simultaneously, coarse particles entrained by the internal swirling flow return to the external swirling flow region under centrifugal force, forming a substantial coarse particle circulation flow. As a result, a mass of coarse particles accumulates in the separation chamber, hindering the centrifugal settling of medium particles and resulting in an enlarged cut size and severe coarse particle misplacement.