Abstract
The chemical environment surrounding a galvanic metal pair determines whether chlorine is productively directed toward contaminant degradation or consumed by competing constituents. This study maps those chemical microenvironments for the degradation of Sunset Yellow FCF (SSY) using a self-driven iron–copper galvanic couple in the presence of aqueous chlorine (Fe–Cu/chlorine) under a common reference condition (20 mg L−1 SSY, 600 µM chlorine, initial pH 5, 25 °C, 200 mL, and 400 rpm). Chloride at 10 mM shortened the degradation time to about 15 min, whereas sulfate retained near-complete degradation by approximately 24 min. In contrast, 10 mM nitrate left C/C0 ≈ 0.38 after 30 min, and nitrite almost completely suppressed SSY loss. Molecular probes produced differentiated responses: tert-butanol and propan-2-ol caused moderate inhibition, phenol and benzoic acid caused strong competition, nitrobenzene delayed but did not prevent the endpoint, and ascorbic acid arrested degradation. Humic acid imposed only moderate dose-dependent inhibition, with C/C0 ≈ 0.18 at 15 mg L−1 after 30 min. CO2 bubbling gave the fastest gas-conditioned response, reaching the endpoint in about 18 min while maintaining a higher final bulk pH than the other atmospheres. In authentic waters adjusted initially to pH 5, tap water reached near-complete SSY degradation within 24 min, while tertiary-treated wastewater and Zamzam water reached C/C0 ≈ 0.03 and 0.12, respectively, after 30 min. By integrating ion effects, probe competition, natural organic matter, gas conditioning, and real-water performance, this work establishes the chemical microenvironment as an organizing design variable for self-powered Fe–Cu/chlorine treatment and demonstrates extensive SSY degradation across chemically diverse matrices.