Abstract
This paper focuses on dealing with the problem of co-designing a fuzzy-basis-dependent event generator and an asynchronous filter of fuzzy Markovian jump systems via event-triggered non-parallel distribution compensation (non-PDC) scheme. The introduction of the event-triggered non-PDC scheme can reduce the number of real-time filter gain design operations with a large computational load. Furthermore, to perform an effective relaxation process, several kinds of time-varying parameters in filter design conditions are simultaneously relaxed by utilizing two zero equalities of transition probabilities and mismatch errors. In addition, to improve the considered performance, the event generation function is established based on fuzzy-basis-dependent event weighting matrices.
Keywords:
event-triggered mechanism; mismatched fuzzy basis function; asynchronous mode; nonhomogeneous Markov process; relaxation technique MSC:
93-08
1. Introduction
As is well known, the Markovian jump system model has the advantage that it is very suitable for characterizing dynamic hybrid systems with abrupt parameters or structural changes (see [1,2,3,4]). Furthermore, it has also been recognized that the T-S fuzzy system model has an excellent ability to represent nonlinear systems by blending local linear systems (refer to [5,6,7,8,9,10,11]). In this context, fuzzy Markovian jump systems (FMJSs) have become quite popular because these systems can systematically fuse the unique features of the above two system models. Accordingly, the FMJSs have been actively utilized in various application systems where nonlinearity and system mode change must be considered, for example in fields such as robotic, communication, network control, economic system, and power system [12,13,14,15,16,17,18]. In particular, as reported in [19,20,21], the introduction of the non-PDC scheme offers the advantage of decreasing the conservatism of the controller or filter design conditions. Thus, in light of the non-PDC scheme, Ref. [22] developed the robust mode-independent state-feedback controller for homogeneous FMJSs, and Ref. [23] designed the super-twisting controller for descriptor homogeneous FMJSs via integral sliding modes. In addition, Ref. [24] addressed the problem of synchronous mode-dependent observer-based control for fractional-order fuzzy systems with homogeneous Markov process via the non-PDC scheme. Most recently, using the non-PDC scheme, Ref. [25] addressed the problem of dissipative controller design for nonhomogeneous FMJSs with dual modes.
However, one noteworthy point is that further investigation is still needed to consider the asynchronism and nonhomogeneity when designing filters of FMJSs according to the non-PDC scheme.
Moreover, an event-triggered mechanism has received considerable attention in recent years due to its advantages of reducing the transmitted data throughput and/or computation times. In fact, since the non-PDC scheme requires more computational load compared to the PDC scheme due to inverse matrix operations, performing such operations every time acts as a factor that reduces the efficiency of hardware resources. For this reason, the number of times to update the fuzzy filter gains also needs to be reduced by automatically activating the non-PDC and fuzzy basis function (FBF) modules according to an event-triggered mechanism. To realize this, two additional design requirements must be considered along with the filter design problem: (i) one is that the current system operation mode cannot be precisely used for filter operation, and (ii) the other is that the current premise variables of FBF cannot be accurately obtained real-time. In [26], a study of event-triggered and reduced-order filtering for homogeneous FMJSs was performed with consideration of asynchronous filter modes. In addition, Ref. [27] addressed the adaptive event-triggered finite-time filtering problem for interval type-2 homogeneous FMJSs with asynchronous modes, and Ref. [28] investigated the event-triggered asynchronous filtering problem of semi-FMJSs subject to deception attacks. Besides, under imperfect premise matching, Ref. [29] addressed the networked fuzzy filtering problem of homogeneous FMJSs. Indeed, all of the above studies provide successful results in designing event-triggered and networked filters under practical constraints. However, it is also true that more attention needs to be paid to simultaneously meet the above requirements in the non-PDC filtering problem of nonhomogeneous FMJSs.
To compensate for the shortcomings of the previous studies, this paper aims to co-design a fuzzy-basis-dependent event generator and an asynchronous filter of nonhomogeneous FMJSs via an event-triggered non-PDC scheme. To this end, this paper provides a method to transform the nonconvex form of filter design conditions into the parameterized linear matrix inequality (PLMI)-based form by utilizing the congruence transformation and the matrix inequality-based decoupling method. After that, based on the proposed relaxation process, the PLMI-based conditions are transformed into the LMI-based conditions in a less conservative manner. The detailed contributions of this paper can be summarized as follows.
- In contrast to other studies based on the PDC scheme, to enhance the performance improvement, this paper uses a non-PDC scheme when designing asynchronous mode-dependent fuzzy filter gains. In addition, the mode- and fuzzy-basis-dependent event weighting matrices are employed to construct the event generation function.
- By taking the design requirements (i) and (ii) into account, this paper proposes a method such that at the moment when the event generation condition is satisfied, the system mode can be transmitted to the filter side, and the non-PDC and FBF modules can be activated. In particular, the problem of mismatched fuzzy basis functions, caused by using the event-triggered outputs as the source of premise variables on the filter side, is effectively addressed by considering their errors from the original.
- The relaxation of the PLMI-based conditions is effectively performed (i) by simultaneously addressing three types of time-varying parameters, i.e., transition probabilities, fuzzy basis functions, and mismatched fuzzy basis functions, and (ii) by reflecting two zero equalities of transition probabilities and mismatch errors in the relaxation process so that less conservative LMIs can be derived from PLMIs.
Notations: denotes the set . () means that P is real symmetric and positive semidefinite (definite). In symmetric block matrices, the asterisk is used as an ellipsis for terms induced by symmetry. denotes the mathematical expectation; stands for a block-diagonal matrix; ; ; and is the -dimensional identity matrix. denotes the dimensional standard simplex. For , the following notations are used:
where denotes a real submatrix or a scalar value.
2. System Description and Preliminaries
For a given probability space , let us consider the following FMJS with the system mode :
where , , , and denote the state, the disturbance input that belongs to , the measurement output, and the performance output; is characterized by a discrete-time Markov chain operating according to ; and for ,
in which denotes the normalized fuzzy basis (or called fuzzy weighting) function vector goverend by the premise variable ; and r denotes the number of IF-THEN fuzzy rules. Specifically, in (1), and satisfy and . Furthermore, to consider realistic situations, the mode set of is classified into two subsets such that :
where contains the set because the transition probability essentially satisfies .
Next, let us consider the following output error between the current and transmitted outputs, caused by the event-triggered mechanism:
where indicates the last transfer time instance and represents the corresponding index number. Based on the output error, the event-triggered mechanism operates according to the following fuzzy-basis-dependent event generation function:
where denotes the fuzzy-basis-dependent event weighting matrix to be determined later, and denotes the given event threshold matrix with for all . In other words, the transmission of both output and system mode is triggered at the following time instance:
As shown in Figure 1, this paper aims to design a filter that estimates the performance output using the measured output under an event-triggered mechanism. The event-triggered mechanism is operated through the event generator and the transmitter, where the event generator outputs an ENT signal to the transmitter at the moment (5) holds (i.e., at ), and the transmitter is activated by the ENT signal and sends the measured output signal and system mode to the next modules. In particular, the FBF module is used to construct the event-triggered fuzzy basis function from the transmitted output , and the non-PDC module calculates the -dependent filter gains using the inverse operation.
Figure 1.
Block diagram of the entire system under our consideration.
Remark 1.
Remark 2.
As can be seen from Figure 1, the role of the ENT signal can be specifically divided into two categories. The first is to determine the timing at which the transmitter is activated. When the transmitter is activated, the triggered output signal and can be sent to the next modules. The second is to activate the filter gain update process consisting of the FBF module and the non-PDC module. Ultimately, the ENT-based update process can reduce the number of inverse operations to be driven in the non-PDC module.
Constraint 1.
To reduce data throughput, this paper proposes a protocol that allows the system mode to be transmitted to the filter side at time instance . Thereupon, the filter mode is maintained at for , which becomes asynchronous with the system mode for that time interval. In this regard, as a form of representing the asynchronism between and , this paper employs the following conditional probability:
which satisfies . In practice, one can utilize the relative frequency distribution method [30] to construct from data for pairs.
Constraint 2.
In the considered protocol, since the output signal is transmitted to the filter side only at , the fuzzy basis function must be constructed using the transmitted output via the FBF module in Figure 1, and the fuzzy-basis-dependent filter has no choice but to be designed on the basis of via the non-PDC module in Figure 1. Meanwhile, since the mismatched fuzzy basis function is given from , the following properties still hold: and , for all . Thus, the mismatch error satisfies
where is introduced as a tunable upper bound to improve filtering performance. In practice, the setting of will be verified via the transient responses of and .
Remark 3.
Since the fuzzy basis function of filter, i.e., , corresponds to an instantaneous value of at , it still follows the fundamental properties of , that is, and , for all .
By considering (2)–(7), subject to Constraints 1 and 2:
where and denote the filter state and the estimated performance output, respectively; stands for the asynchronous filter mode; and the filter gains , , and are obtained later according to the non-PDC scheme [20].
Remark 4.
In comparison to PDC, the non-PDC scheme demands more computational burden to calculate the fuzzy filter gains. Thus, based on (8), this paper proposes a method such that follows even if the filter gains are updated only when the output is transmitted (i.e., at time instance .
Before going ahead, for the sake of simplicity, we use the following notations hereafter: , , , , , , , , and for any matrix . In addition, we define and to represent the transition probability of (2) as follows:
Lemma 1
([31]). Let us consider the fuzzy-basis-dependent matrix . Then, holds if it holds that
Definition 1
Definition 2
([33]). For the zero initial condition, suppose the energy supply function satisfies that for a given scalar and any ,
with the following quadratic energy supply rate:
where (i.e., ), , and are given real matrices. Then, system (10) is said to be strictly dissipative, and β denotes the dissipativity performance level.
3. Asynchronous Mode-Dependent Filter Design
Let us choose a mode- and fuzzy-basis-dependent Lyapunov function candidate of the following form:
where .
The following lemma presents the stochastic stability and strict --dissipativity condition of (10) subject to (5).
Lemma 2.
The filtering error system (10) is stochastically stable and strictly -β-dissipative if it holds that
Proof of Lemma 2.
First, let us consider the case of . Then, since the event-triggered mechanism allows on the basis of (5), condition (18) ensures
which can be represented as with a sufficiently small scalar . Thus, for , it follows that
As a result, since it is satisfied that
the filtering error system (10) is stochastically stable in the absence of disturbances according to Definition 1.
The following lemma presents the stochastic stability and strict --dissipativity condition of (10) subject to (5), formulated in terms of multi-parameterized linear matrix inequalities (MPLMIs).
Lemma 3.
For prescribed and , suppose that there exist a scalar and matrices , , , ,
such that for all g and , it holds that
where
Then the filtering error system (10) is stochastically stable and strictly --dissipative, and the fuzzy filter gains and are designed via the non-PDC scheme as follows: , .
Proof of Lemma 3.
In order to facilitate the later discussion, let us define
Then, the filtering error system (10) can be rewritten as follows:
where
Furthermore, based on (17) and (28), it is valid that
where
Accordingly, from (27) and (29), it follows that
Continuing, (4) and (16) lead to
Thus, combining (30)–(32) results in
where
As a result, the condition ensures the stochastic stability and strict dissipativity condition (18) in Lemma 2, and the Schur complement of is formulated as follows:
In what follows, note that (23) leads to
Thus, since (26) implies
the nonsingular matrix in (25) can be used for a congruence transformation on (34), and is also invertible.
Pre- and post-multiplying (34) by and its transpose and by using , it is given that
where , , , , , , and . Specifically, based on (11)–(13), (25), and (35), the block matrices in (36) can be described as follows:
where and . Therefore, condition (36) boils down to (26), which becomes the stochastic stability and strict --dissipativity condition. □
The following theorem presents the stochastic stability and strict --dissipativity condition of (10) subject to (5), formulated in terms of LMIs by establishing
Theorem 1.
For prescribed and , suppose that there exist a scalar and matrices , , , , ,
such that for all , it holds that:
with
where
in which , , ,
, , , , , , , , , , , , . Then the filtering error system (10) is stochastically stable and strictly -β-dissipative, and the fuzzy filter gains are calculated via the non-PDC module in Figure 1 as follows:
Proof of Theorem 1.
From (2) and (9), it follows that
In addition, based on , it is available that
Thus, using (45) and (46), condition (26) is written as follows:
where
in which
Furthermore, condition (47) holds if it is satisfied that
First, by (37), (38), and
condition (48) can be rearranged as follows:
where and are defined in (43) and (44), respectively. Thereupon, owing to , condition (51) is converted into
Subsequently, from (7), i.e., , it follows that
Thus, noting that
condition (52) becomes
Moreover, since (39) implies , it holds by (7) that
Accordingly, condition (54) is ensured by
which is transformed by the Schur complement into
Hence, with the aid of Lemma 1, the relaxed conditions of (57) are given as (39) and (40).
Remark 5.
In this paper, the PLMIs with and are transformed into by using the bounds and zero equality of the error between and , and setting the replacement variables and as (37). Thus, the non-PDC-based PLMIs in Lemma 3 can be also relaxed according to Lemma 1, as shown in the proof of Theorem 1.
As a by-product of Theorem 1, the following corollary considers a special case where and , for all g.
Corollary 1.
For given and , suppose that there exist a scalar and matrices , , , , , , such that for all , LMIs (39), (40), and (42) hold, where
in which
Then the filtering error system (10) is stochastically stable and strictly -β-dissipative, and the fuzzy filter gains are designed as follows: , , and
4. Illustrative Examples
In this section, two examples are presented: the first example assumes (i.e., ) and (i.e., ) for comparison with previous studies, but the second example shows our results for the case where the assumptions of the first example are not enforced.
Example 1
(for and ). Let us consider the following discrete-time FMJS with and , used in [34]
where the fuzzy basis functions are given as and . In addition, the transition rates and conditional probabilities are given as follows:
Table 1 and Table 2 show the maximum dissipativity performance levels for and several , obtained by Theorem 2 in [26] and Corollary 1, where , , . From Table 1 and Table 2, it can be found that the dissipativity performance deteriorates as the event threshold increase. Furthermore, Corollary 1 provides better performance levels than those of Theorem 2 in [26] for all . In particular, the effect of Corollary 1 become more pronounced as the order of the filter increases.
Table 1.
Optimal performance for different and .
Table 2.
Optimal performance for different and .
Meanwhile, for and , Corollary 1 offers the following solution:
According to the event-triggered scheme, Figure 2a shows the instance when the event generator outputs an ENT signal to the transmitter, then the measured output signal and evolution of system mode are transmitted to the filter, which are displayed in Figure 2b and Figure 2c, respectively. Especially, since matched error , FBF module constructs the event-triggered fuzzy basis functions from the measured output . Based on the obtained non-PDC fuzzy filter gains, Figure 3a,b show the response of , , and for , ; and Figure 3c,d show the response of , , and for , , and (elsewhere). As a result, from Figure 3b, it can be found that the filtering errors converge to zero as time increases, and from Figure 3d, it can be verified that the dissipativity performance in Table 2 holds because is satisfied.
Figure 2.
Event-triggered transmission: (a) the release instance and interval, (b) measured output and , and (c) evolution of and .
Figure 3.
Filter response: (a,b) , , and for and ; and (c,d) , , and for and .
Example 2
(for and ). Let us consider a tunnel diode circuit system expressed as FMJS with , adopted in [34]:
where the fuzzy basis functions are given as
In addition, the transition rates are given as follows:
which means that , , , and . Furthermore, to obtain the simulation results for both synchronous and asynchronous cases, the conditional probabilities are established as follows:
For and , Table 3 shows the maximum dissipativity performance level for several , obtained by Theorem 1, where , , . From Table 3, it can be found that (1) the dissipativity performance deteriorates as the mismatch threshold increase, (2) the synchronous case offers better performance than the asynchronous case.
Table 3.
Comparison of dissipativity performance for different .
Meanwhile, for Case 2 and , Theorem 1 offers the following solution:
According to the event-triggered scheme, Figure 4a shows the instance when the event generator outputs an ENT signal to the transmitter, then the measured output signal and evolution of system mode are transmitted to the filter, which are displayed in Figure 4b and Figure 4c, respectively. From the transmitted output , FBF module constructs the event-triggered fuzzy basis functions , which are shown in Figure 5a,b, and the dynamic behavior of are presented in Figure 5c. Based on the obtained non-PDC fuzzy filter gains, Figure 6a,b show the response of , , and for , ; and Figure 6c,d show the response of , , and for zero initial , , , and (elsewhere). As a result, from Figure 6b, it can be found that the filtering errors converge to zero as time increases, and from Figure 6d, it can be seen that the dissipativity performance in Table 3 holds because is satisfied. Not only that, it can be verified from Figure 5c that satisfies , for .
Figure 4.
Event-triggered transmission: (a) the release instance and interval, (b) measured output and , and (c) evolution of and .
Figure 5.
FBF module: (a,b) fuzzy-basis functions and , and (c) fuzzy basis function error .
Figure 6.
Filter response: (a,b) , , and for and ; and (c,d) , , and for and .
5. Concluding Remarks
In this paper, we have studied the event-triggered dissipative filtering problem of nonhomogeneous FMJSs against asynchronous modes and mismatched premise variables. To sum up, the proposed method makes significant progress in improving the filter performance (i) by using a non-PDC scheme for the construction of asynchronous mode-dependent fuzzy filter gains, (ii) by making the event generation function dependent on fuzzy basis functions, and (iii) by implementing a relaxation processes that takes advantage of stringent constraints on time-varying paraemters.
Author Contributions
Conceptualization, S.H.K.; Data curation, K.H.N. and S.H.K.; Formal analysis, K.H.N. and S.H.K.; Funding acquisition, S.H.K.; Investigation, S.H.K.; Methodology, K.H.N. and S.H.K.; Project administration, S.H.K.; Resources, S.H.K.; Software, K.H.N.; Supervision, S.H.K.; Validation, K.H.N. and S.H.K.; Visualization, K.H.N. and S.H.K.; Writing—original draft, K.H.N. and S.H.K.; Writing—review & editing, K.H.N. and S.H.K. All authors have read and agreed to the published version of the manuscript.
Funding
This work was supported by the National Research Foundation of Korea Grant funded by the Korean Government (NRF-2018R1D1A1B07041456).
Institutional Review Board Statement
Not applicable.
Informed Consent Statement
Not applicable.
Data Availability Statement
Not applicable.
Conflicts of Interest
The authors declare no conflict of interest.
Abbreviations
The following abbreviations are used in this manuscript:
| Markovian jump system mode | |
| transition rates | |
| conditional probability | |
| fuzzy-basis function | |
| fuzzy premise variable | |
| fuzzy mismatch error | |
| event threshold matrix | |
| event threshold | |
| dissipativity performance level |
References
- Mariton, M. Jump Linear Systems in Automatic Control; Courier Corp.: New York, NY, USA, 1990. [Google Scholar]
- Shi, P.; Boukas, E.K.; Agarwal, R.K. Control of Markovian jump discrete-time systems with norm bounded uncertainty and unknown delay. IEEE Trans. Autom. Control 1999, 44, 2139–2144. [Google Scholar]
- Nguyen, N.H.A.; Kim, S.H. Asynchronous observer-based control synthesis of nonhomogeneous Markovian jump systems with generalized incomplete transition rates. Appl. Math. Comput. 2021, 411, 126532. [Google Scholar] [CrossRef] [Scilit]
- Liu, X.; Li, W.; Yao, C.; Li, Y. Finite-time guaranteed cost control for Markovian jump systems with time-varying delays. Mathematics 2022, 10, 2028. [Google Scholar] [CrossRef] [Scilit]
- Takagi, T.; Sugeno, M. Fuzzy identification of systems and its applications to modeling and control. IEEE Trans. Syst. Man Cybern. 1985, 1, 116–132. [Google Scholar] [CrossRef] [Scilit]
- Begovich, O.; Sanchez, E.N.; Maldonado, M. Takagi-Sugeno fuzzy scheme for real-time trajectory tracking of an underactuated robot. IEEE Trans. Control Syst. Technol. 2002, 10, 14–20. [Google Scholar] [CrossRef]
- Kim, S.H. Dissipative control of Markovian jump fuzzy systems under nonhomogeneity and asynchronism. Nonlinear Dyn. 2019, 97, 629–646. [Google Scholar] [CrossRef] [Scilit]
- Mittal, K.; Jain, A.; Vaisla, K.S.; Castillo, O.; Kacprzyk, J. A comprehensive review on type 2 fuzzy logic applications: Past, present and future. Eng. Appl. Artif. Intell. 2020, 95, 103916. [Google Scholar] [CrossRef] [Scilit]
- Wang, J.; Yang, C.; Xia, J.; Wu, Z.G.; Shen, H. Observer-based sliding mode control for networked fuzzy singularly perturbed systems under weighted try-once-discard protocol. IEEE Trans. Fuzzy Syst. 2021, 30, 1889–1899. [Google Scholar] [CrossRef] [Scilit]
- Yan, Z.; Zhang, Z.; Hu, G.; Zhu, B. Observer-based finite-time control of the blood gases system in extracorporeal circulation via the TS fuzzy model. Mathematics 2022, 10, 2102. [Google Scholar] [CrossRef] [Scilit]
- Huang, H.; Shirkhani, M.; Tavoosi, J.; Mahmoud, O. A New Intelligent Dynamic Control Method for a Class of Stochastic Nonlinear Systems. Mathematics 2022, 10, 1406. [Google Scholar] [CrossRef] [Scilit]
- Kim, S.H. Observer-based control for Markovian jump fuzzy systems under mismatched fuzzy basis functions. IEEE Access 2021, 9, 122971–122982. [Google Scholar] [CrossRef] [Scilit]
- Song, X.; Wang, M.; Song, S.; Wang, Z. Quantized output feedback control for nonlinear Markovian jump distributed parameter systems with unreliable communication links. Appl. Math. Comput. 2019, 353, 371–395. [Google Scholar] [CrossRef] [Scilit]
- Song, X.; Men, Y.; Zhou, J.; Zhao, Z.; Shen, H. Event-triggered control for networked discrete-time Markov jump systems with repeated scalar nonlinearities. Appl. Math. Comput. 2017, 298, 123–132. [Google Scholar] [CrossRef] [Scilit]
- Svensson, L.E.; Williams, N. Optimal monetary policy under uncertainty: A Markov jump-linear-quadratic approach. Fed. Reserve Bank St. Louis Rev. 2008, 90, 275–293. [Google Scholar] [CrossRef] [Scilit]
- Wang, J.; Xia, J.; Shen, H.; Xing, M.; Park, J.H. synchronization for fuzzy Markov jump chaotic systems with piecewise-constant transition probabilities subject to PDT switching rule. IEEE Trans. Fuzzy Syst. 2020, 29, 3082–3092. [Google Scholar] [CrossRef] [Scilit]
- Nguyen, T.B.; Song, H.K. Relaxed observer-based -control for Markov jump fuzzy systems with incomplete transition probabilities and sensor failures. Mathematics 2022, 10, 2055. [Google Scholar] [CrossRef] [Scilit]
- Ugrinovskii, V.; Pota, H.R. Decentralized control of power systems via robust control of uncertain Markov jump parameter systems. Int. J. Control 2005, 78, 662–677. [Google Scholar] [CrossRef] [Scilit]
- Guerra, T.M.; Vermeiren, L. LMI-based relaxed nonquadratic stabilization conditions for nonlinear systems in the Takagi–Sugeno’s form. Automatica 2004, 40, 823–829. [Google Scholar] [CrossRef] [Scilit]
- Ding, B.C.; Sun, H.X.; Yang, P. Further studies on LMI-based relaxed stabilization conditions for nonlinear systems in Takagi–Sugeno’s form. Automatica 2006, 43, 503–508. [Google Scholar] [CrossRef] [Scilit]
- Nguyen, T.B.; Kim, S.H. Relaxed dissipative control of nonhomogeneous Markovian jump fuzzy systems via stochastic nonquadratic stabilization approach. Nonlinear Anal. Hybrid Syst. 2020, 38, 100915. [Google Scholar] [CrossRef] [Scilit]
- Wu, H.N.; Cai, K.Y. Robust fuzzy control for uncertain discrete-time nonlinear Markovian jump systems without mode observations. Inf. Sci. 2007, 177, 1509–1522. [Google Scholar] [CrossRef] [Scilit]
- Li, J.; Zhang, Q.; Yan, X.G.; Spurgeon, S.K. Integral sliding mode control for Markovian jump T–S fuzzy descriptor systems based on the super-twisting algorithm. IET Contr. Theory Appl. 2017, 11, 1134–1143. [Google Scholar] [CrossRef] [Scilit]
- Duan, R.; Li, J.; Chen, J. Mode-dependent non-fragile observer-based controller design for fractional-order T–S fuzzy systems with Markovian jump via non-PDC scheme. Nonlinear Anal. Hybrid Syst. 2019, 34, 74–91. [Google Scholar] [CrossRef] [Scilit]
- Kim, S.H. Nonquadratic stabilization conditions for nonhomogeneous Markovian jump fuzzy systems with higher-level operation modes. J. Frankl. Inst. 2021, 358, 1553–1577. [Google Scholar] [CrossRef] [Scilit]
- Tao, J.; Xiao, Z.; Rao, H.; Wu, J.; Lu, R.; Shi, P.; Wang, X. Event-triggered and asynchronous reduced-order filtering codesign for fuzzy Markov jump systems. IEEE Trans. Syst. Man Cybern. 2021, 52, 3937–3946. [Google Scholar] [CrossRef] [Scilit]
- Liu, J.; Ran, G.; Huang, Y.; Han, C.; Yu, Y.; Sun, C. Adaptive event-triggered finite-time dissipative filtering for interval type-2 fuzzy Markov jump systems with asynchronous modes. IEEE T. Cybern. 2021, 1–13. [Google Scholar] [CrossRef] [Scilit]
- Ran, G.; Liu, J.; Li, C.; Chen, H.; Han, C. Finite-time filtering for fuzzy nonlinear semi-Markov jump systems with deception attacks and aperiodical transmission. J. Frankl. Inst. 2021. [Google Scholar] [CrossRef] [Scilit]
- Ma, S.; Peng, C.; Song, Y.; Du, D. Networked filtering for Markovian jump T–S fuzzy systems with imperfect premise matching. IET Signal Process. 2017, 11, 304–312. [Google Scholar] [CrossRef] [Scilit]
- Leon Garcia, A. Probability and Random Processes for Electrical Engineering; Pearson Education: Sholinganallur, India, 1994. [Google Scholar]
- Tuan, H.D.; Apkarian, P.; Narikiyo, T.; Yamamoto, Y. Parameterized linear matrix inequality techniques in fuzzy control system design. Complexity 2001, 9, 324–332. [Google Scholar] [CrossRef] [Scilit]
- Souza, C.E.D. Robust stability and stabilization of uncertain discrete-time Markovian jump linear systems. IEEE Trans. Autom. Control 2006, 51, 836–841. [Google Scholar] [CrossRef] [Scilit]
- Tan, Z.; Soh, Y.C.; Xie, L. Dissipative control for linear discrete-time systems. Automatica 1999, 35, 1557–1564. [Google Scholar] [CrossRef] [Scilit]
- Kim, S.H. Asynchronous dissipative filter design of nonhomogeneous Markovian jump fuzzy systems via relaxation of triple-parameterized matrix inequalities. Inf. Sci. 2019, 478, 564–579. [Google Scholar] [CrossRef] [Scilit]
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. |
© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).





