Next Issue
Volume 12, December
Previous Issue
Volume 12, October
 
 

Technologies, Volume 12, Issue 11 (November 2024) – 27 articles

Cover Story (view full-size image): The paper dives deep into evaluating two leading frameworks—Apache Spark GraphX and Apache Flink—providing critical insights into their performance, scalability, and applicability across diverse domains like IoT, AI, and blockchain.
Through rigorous benchmarking, this study uncovers the strengths of GraphX in batch processing tasks with in-memory optimization, making it ideal for machine learning and blockchain operations. Conversely, Flink excels in real-time stream processing, demonstrating its suitability for IoT applications that demand low-latency operations. This research not only evaluates computational efficiency but also explores the systems’ decision-making implications, highlighting their role in addressing the evolving needs of modern technology ecosystems. View this paper
  • Issues are regarded as officially published after their release is announced to the table of contents alert mailing list.
  • You may sign up for e-mail alerts to receive table of contents of newly released issues.
  • PDF is the official format for papers published in both, html and pdf forms. To view the papers in pdf format, click on the "PDF Full-text" link, and use the free Adobe Reader to open them.
Order results
Result details
Section
Select all
Export citation of selected articles as:
15 pages, 912 KiB  
Article
A Three-Level Service Quality Index System for Wind Turbine Groups Based on Fuzzy Comprehensive Evaluation
by Xueting Cheng, Jie Hao, Yuxiang Li, Juan Wei, Weiru Wang and Yaohui Lu
Technologies 2024, 12(11), 234; https://doi.org/10.3390/technologies12110234 - 20 Nov 2024
Viewed by 681
Abstract
The maintenance and upkeep costs of wind farms and their internal wind turbines have been increasing annually. Therefore, a systematic evaluation of their operating status is of great importance in guiding reductions in maintenance and upkeep costs. In this aspect, this article proposes [...] Read more.
The maintenance and upkeep costs of wind farms and their internal wind turbines have been increasing annually. Therefore, a systematic evaluation of their operating status is of great importance in guiding reductions in maintenance and upkeep costs. In this aspect, this article proposes a three-level service quality index system of “key component–wind turbine–wind farm” based on the fuzzy comprehensive evaluation method. Firstly, raw data on the wind farm are preprocessed to avoid the impact of abnormal data on the evaluation results. Then, the data types are classified and the degradation degree of each indicator is calculated. Based on the entropy weight method, the weight of each indicator is weighted and summed to obtain the overall membership degree. Finally, the overall health level is determined according to the “maximum membership degree”, which is the evaluation result. This article conducts an evaluation experiment based on the actual operating data of Gansu Huadian Nanqiu Wind Farm. The example shows that the proposed strategy can systematically evaluate the health level of wind farms and predict the future trends of health status changes. The research results can provide reference for the reasonable arrangement of unit scheduling, operation, and maintenance plans in wind farms. Full article
(This article belongs to the Special Issue Next-Generation Distribution System Planning, Operation, and Control)
Show Figures

Figure 1

14 pages, 1707 KiB  
Review
Influence of Insulin Pen Needle Geometry on Pain Perception and Patient’s Acceptability: A Review
by Francesca De Tommasi and Sergio Silvestri
Technologies 2024, 12(11), 233; https://doi.org/10.3390/technologies12110233 - 19 Nov 2024
Viewed by 714
Abstract
Diabetes is one of the most common diseases worldwide, with an increasing number of people affected. Insulin therapy is still the major treatment for both Type 1 and Type 2 diabetes and has evolved from bulky syringes to modern insulin pens introduced in [...] Read more.
Diabetes is one of the most common diseases worldwide, with an increasing number of people affected. Insulin therapy is still the major treatment for both Type 1 and Type 2 diabetes and has evolved from bulky syringes to modern insulin pens introduced in 1985. An insulin pen consists of three major parts: a cartridge, a single-use pen needle (PN), and a precision dosing mechanism. Initially, PNs were long and thick, causing great discomfort and concern. Thanks to advances in design, shorter and thinner needles have appeared on the market, improving patient acceptability and pain perception. Studies highlight the influence of PN geometry and other characteristics on injection-related pain, including length, diameter, bevel design, and hub. Despite a lack of specific international regulations for PN geometry, scientific publications have focused on exploring different PNs’ characteristics to optimize patient comfort and reduce pain. To guide the selection of suitable PNs, this review provides a round-up of literature research findings on the impact of PN geometry on pain perception and patient acceptability. Specifically, it provides an overview of the PN manufacturing process, current international regulations, and the state-of-the-art research on PN geometry affecting pain perception. Full article
(This article belongs to the Collection Review Papers Collection for Advanced Technologies)
Show Figures

Figure 1

25 pages, 3157 KiB  
Article
Breaking Barriers: The Design and Development of an Assistive Technology Web App for Older Latinos with Disabilities in Daily Activities
by Elsa M. Orellano-Colón, Adriana I. Ramos-Marichal, Valeria R. González-Crespo, Bianca N. Zeballos-Hernández, Kenneth N. Ruiz-Márquez, Abiel Roche-Lima, Joan M. Adorno-Mercado, Norman A. Laborde-Torres, Joshua G. Berríos-Llopart, Angely M. Cruz-Ramos, Dana V. Montenegro, Carmen E. Lamoutte, Natasha D. Rosa-Casilla and David E. Meléndez-Berrios
Technologies 2024, 12(11), 232; https://doi.org/10.3390/technologies12110232 - 19 Nov 2024
Viewed by 867
Abstract
Latinos are among the populations who are the least likely to use assistive technology (AT) despite being a population with a high prevalence of functional disabilities (FDs). We aimed to create and test the usability of an AT web app for independent-living older [...] Read more.
Latinos are among the populations who are the least likely to use assistive technology (AT) despite being a population with a high prevalence of functional disabilities (FDs). We aimed to create and test the usability of an AT web app for independent-living older adults with FDs. In Phase I, we created the web app’s content guided by the Optimized Honeycomb Model and considered the AT needs and FDs of older Puerto Ricans found in our previous studies. In Phase II, we design the web application by adopting a Lean UX process and design heuristics for older adults. In Phase III, we conducted usability testing using focus groups and individual interviews with 14 older adults, interpreted through a directed content analysis. The Mi Guía de Asistencia Tecnológica (MGAT) was developed with ninety-four AT devices in eight areas of daily activities. The MGAT provides comprehensive information on AT, including photos and videos of older adults using AT. Participants reported that the MGAT was usable, accessible, credible, desirable, useful, and valuable in increasing their knowledge of AT. These findings are a foundation for developing efficient AT information strategies using such technology as a first step to improving AT adoption among older adults. Full article
Show Figures

Figure 1

17 pages, 2482 KiB  
Article
Smart Insole-Based Plantar Pressure Analysis for Healthy and Diabetic Feet Classification: Statistical vs. Machine Learning Approaches
by Dipak Kumar Agrawal, Watcharin Jongpinit, Soodkhet Pojprapai, Wipawee Usaha, Pattra Wattanapan, Pornthep Tangkanjanavelukul and Timporn Vitoonpong
Technologies 2024, 12(11), 231; https://doi.org/10.3390/technologies12110231 - 19 Nov 2024
Viewed by 826
Abstract
Diabetes is a significant global health issue impacting millions. Approximately 26 million diabetics experience foot ulcers, with 20% ending up with amputations, resulting in high morbidity, mortality, and costs. Plantar pressure screening shows potential for early detection of Diabetic Foot Ulcers (DFUs). Although [...] Read more.
Diabetes is a significant global health issue impacting millions. Approximately 26 million diabetics experience foot ulcers, with 20% ending up with amputations, resulting in high morbidity, mortality, and costs. Plantar pressure screening shows potential for early detection of Diabetic Foot Ulcers (DFUs). Although foot ulcers often occur due to excessive pressure on the soles during dynamic activities, most studies focus on static pressure measurements. This study’s primary objective is to apply wireless plantar pressure sensor-embedded insoles to classify and detect diabetic feet from healthy ones based on dynamic plantar pressure. The secondary objective is to compare statistical-based and Machine Learning (ML) classification methods. Data from 150 subjects were collected from the insoles during walking, revealing that diabetic feet have higher plantar pressure than healthy feet, which is consistent with prior research. The Adaptive Boosting (AdaBoost) ML model achieved the highest accuracy of 0.85, outperforming the statistical method, which had an accuracy of 0.67. These findings suggest that ML models, combined with pressure sensor-embedded insoles, can effectively classify healthy and diabetic feet using plantar pressure features. Future research will focus on using these insoles with ML to classify various stages of diabetic neuropathy, aiming for early prediction of foot ulcers in home settings. Full article
(This article belongs to the Special Issue Technological Advances in Science, Medicine, and Engineering 2024)
Show Figures

Figure 1

25 pages, 20254 KiB  
Article
IoT-Enhanced Decision Support System for Real-Time Greenhouse Microclimate Monitoring and Control
by Dragoș-Ioan Săcăleanu, Mihai-Gabriel Matache, Ștefan-George Roșu, Bogdan-Cristian Florea, Irina-Petra Manciu and Lucian-Andrei Perișoară
Technologies 2024, 12(11), 230; https://doi.org/10.3390/technologies12110230 - 14 Nov 2024
Viewed by 1012
Abstract
Greenhouses have taken on a fundamental role in agriculture. The Internet of Things (IoT) is a key concept used in greenhouse-based precision agriculture (PA) to enhance vegetable quality and quantity while improving resource efficiency. Integrating wireless sensor networks (WSNs) into greenhouses to monitor [...] Read more.
Greenhouses have taken on a fundamental role in agriculture. The Internet of Things (IoT) is a key concept used in greenhouse-based precision agriculture (PA) to enhance vegetable quality and quantity while improving resource efficiency. Integrating wireless sensor networks (WSNs) into greenhouses to monitor environmental parameters represents a critical first step in developing a complete IoT solution. For further optimization of the results, including actuator nodes to control the microclimate is necessary. The greenhouse must also be remotely monitored and controlled via an internet-based platform. This paper proposes an IoT-based architecture as a decision support system for farmers. A web platform has been developed to acquire data from custom-developed wireless sensor nodes and send commands to custom-developed wireless actuator nodes in a greenhouse environment. The wireless sensor and actuator nodes (WSANs) utilize LoRaWAN, one of the most prominent Low-Power Wide-Area Network (LPWAN) technologies, known for its long data transmission range. A real-time end-to-end deployment of a remotely managed WSAN was conducted. The power consumption of the wireless sensor nodes and the recharge efficiency of installed solar panels were analyzed under worst-case scenarios with continuously active nodes and minimal intervals between data transmissions. Datasets were acquired from multiple sensor nodes over a month, demonstrating the system’s functionality and feasibility. Full article
(This article belongs to the Special Issue Advanced Autonomous Systems and Artificial Intelligence Stage)
Show Figures

Figure 1

25 pages, 3232 KiB  
Article
A Framework for Distributed Orchestration of Cyber-Physical Systems: An Energy Trading Case Study
by Kostas Siozios
Technologies 2024, 12(11), 229; https://doi.org/10.3390/technologies12110229 - 13 Nov 2024
Viewed by 850
Abstract
The increasing number of active energy consumers, also known as energy prosumers, is dramatically changing the electricity system. New products and services that adopt the concept of dynamic pricing are available to the market, where demand and price forecasting are applied to determine [...] Read more.
The increasing number of active energy consumers, also known as energy prosumers, is dramatically changing the electricity system. New products and services that adopt the concept of dynamic pricing are available to the market, where demand and price forecasting are applied to determine schedule loads and prices. Throughout this manuscript, a novel framework for energy trading among prosumers is introduced. Rather than solving the problem in a centralized manner, the proposed orchestrator relies on a distributed game theory to determine optimal bids. Experimental results validate the efficiency of proposed solution, since it achieves average energy cost reduction of 2×, as compared to the associated cost from the main grid. Additionally, the hardware implementation of the introduced framework onto a low-cost embedded device achieves near real-time operation with comparable performance to state-of-the-art computational intensive solvers. Full article
(This article belongs to the Collection Selected Papers from the MOCAST Conference Series)
Show Figures

Graphical abstract

23 pages, 5496 KiB  
Article
Medical VR Simulator for Pediatric Strabismus Treatment
by Artem Obukhov, Elena Kutimova, Julia Matrosova, Daniil Teselkin and Maxim Shilcin
Technologies 2024, 12(11), 228; https://doi.org/10.3390/technologies12110228 - 11 Nov 2024
Viewed by 2009
Abstract
In the process of treating pediatric strabismus, great difficulties arise with maintaining attention and a high level of motivation in patients. Existing computer programs and medical equipment should be supplemented with more modern tools and approaches based on virtual reality (VR) technologies, ensuring [...] Read more.
In the process of treating pediatric strabismus, great difficulties arise with maintaining attention and a high level of motivation in patients. Existing computer programs and medical equipment should be supplemented with more modern tools and approaches based on virtual reality (VR) technologies, ensuring the full immersion of children in the treatment process. The aim of this study is to develop and evaluate the effectiveness of a virtual reality medical simulator for the treatment of pediatric strabismus. The specifics of the realization of ophthalmic exercises for the virtual simulator and the methods for evaluation of the quality of their performance are considered. In the course of experimental research, a control group of 58 people using the VR simulator and a reference group of 59 people receiving the standard process of strabismus treatment were compared. The average value of visual acuity in the control group increased from 66.1% to 80.4% (p = 0.002); the average value of objective strabismus angle decreased from 5° to 0° (p < 0.001). The subjective strabismus angle was also found to improve from 3° to 0° (p < 0.001). In terms of exercise quality metrics, a selected subgroup of participants who have been training for a long time have shown positive dynamics in terms of improved accuracy and a reduction in their average number of errors. In summary, virtual reality technologies demonstrated a statistically significant improvement in the metrics used to evaluate orthoptic treatment in the control group and the superiority of this approach over standard treatment. Full article
(This article belongs to the Section Information and Communication Technologies)
Show Figures

Figure 1

16 pages, 298 KiB  
Editorial
Advanced Processing Technologies for Innovative Materials
by Sergey N. Grigoriev, Marina A. Volosova and Anna A. Okunkova
Technologies 2024, 12(11), 227; https://doi.org/10.3390/technologies12110227 - 11 Nov 2024
Viewed by 948
Abstract
There is a need for further, in-depth research that explores the synthesis of newly developed materials created using advanced technologies [...] Full article
(This article belongs to the Special Issue Advanced Processing Technologies of Innovative Materials)
34 pages, 16736 KiB  
Article
Optimized Energy Management Strategy for an Autonomous DC Microgrid Integrating PV/Wind/Battery/Diesel-Based Hybrid PSO-GA-LADRC Through SAPF
by AL-Wesabi Ibrahim, Jiazhu Xu, Abdullrahman A. Al-Shamma’a, Hassan M. Hussein Farh, Imad Aboudrar, Youssef Oubail, Fahad Alaql and Walied Alfraidi
Technologies 2024, 12(11), 226; https://doi.org/10.3390/technologies12110226 - 11 Nov 2024
Viewed by 1091
Abstract
This study focuses on microgrid systems incorporating hybrid renewable energy sources (HRESs) with battery energy storage (BES), both essential for ensuring reliable and consistent operation in off-grid standalone systems. The proposed system includes solar energy, a wind energy source with a synchronous turbine, [...] Read more.
This study focuses on microgrid systems incorporating hybrid renewable energy sources (HRESs) with battery energy storage (BES), both essential for ensuring reliable and consistent operation in off-grid standalone systems. The proposed system includes solar energy, a wind energy source with a synchronous turbine, and BES. Hybrid particle swarm optimizer (PSO) and a genetic algorithm (GA) combined with active disturbance rejection control (ADRC) (PSO-GA-ADRC) are developed to regulate both the frequency and amplitude of the AC bus voltage via a load-side converter (LSC) under various operating conditions. This approach further enables efficient management of accessible generation and general consumption through a bidirectional battery-side converter (BSC). Additionally, the proposed method also enhances power quality across the AC link via mentoring the photovoltaic (PV) inverter to function as shunt active power filter (SAPF), providing the desired harmonic-current element to nonlinear local loads as well. Equipped with an extended state observer (ESO), the hybrid PSO-GA-ADRC provides efficient estimation of and compensation for disturbances such as modeling errors and parameter fluctuations, providing a stable control solution for interior voltage and current control loops. The positive results from hardware-in-the-loop (HIL) experimental results confirm the effectiveness and robustness of this control strategy in maintaining stable voltage and current in real-world scenarios. Full article
Show Figures

Figure 1

29 pages, 2679 KiB  
Article
Fault Diagnosis in a Four-Arm Delta Robot Based on Wavelet Scattering Networks and Artificial Intelligence Techniques
by Claudio Urrea and Carlos Domínguez
Technologies 2024, 12(11), 225; https://doi.org/10.3390/technologies12110225 - 8 Nov 2024
Viewed by 923
Abstract
This paper presents a comprehensive fault diagnosis approach for a delta robot utilizing advanced feature extraction and classification techniques. A four-arm delta robot prototype is designed in SolidWorks for realistic fault analysis. Two case studies investigate faults through control effort and vibration signals, [...] Read more.
This paper presents a comprehensive fault diagnosis approach for a delta robot utilizing advanced feature extraction and classification techniques. A four-arm delta robot prototype is designed in SolidWorks for realistic fault analysis. Two case studies investigate faults through control effort and vibration signals, with control effort detecting motor and encoder faults, while vibration signals identify bearing faults. This study compares time-domain signal features and wavelet scattering networks, applied by classification algorithms including wide neural networks (WNNs), efficient linear support vector machine (ELSVM), efficient logistic regression (ELR), and kernel naive Bayes (KNB). Results indicate that a WNN, using wavelet scattering features ranked by one-way anova, is optimal due to its consistency and reliability, while these features enhance computational efficiency by reducing classifier size. Sensitivity analysis demonstrates the classifier’s capacity to detect untrained faults, highlighting the importance of effective feature extraction and classification methods for fault diagnosis in complex robotic systems. This research significantly contributes to fault diagnosis in delta robots and lays the groundwork for future studies on fault tolerance control and predictive maintenance planning. Future work will focus on the physical implementation of the delta robot in laboratory settings, aiming to improve operational efficiency and reliability in industrial applications. Full article
Show Figures

Figure 1

13 pages, 6335 KiB  
Article
Double Gold/Nitrogen Nanosecond-Laser-Doping of Gold-Coated Silicon Wafer Surfaces in Liquid Nitrogen
by Sergey Kudryashov, Alena Nastulyavichus, Victoria Pryakhina, Evgenia Ulturgasheva, Michael Kovalev, Ivan Podlesnykh, Nikita Stsepuro and Vadim Shakhnov
Technologies 2024, 12(11), 224; https://doi.org/10.3390/technologies12110224 - 7 Nov 2024
Viewed by 1068
Abstract
A novel double-impurity doping process for silicon (Si) surfaces was developed, utilizing nanosecond-laser melting of an 11 nm thick gold (Au) top film and a Si wafer substrate in a laser plasma-activated liquid nitrogen (LN) environment. Scanning electron microscopy revealed a fluence- and [...] Read more.
A novel double-impurity doping process for silicon (Si) surfaces was developed, utilizing nanosecond-laser melting of an 11 nm thick gold (Au) top film and a Si wafer substrate in a laser plasma-activated liquid nitrogen (LN) environment. Scanning electron microscopy revealed a fluence- and exposure-independent surface micro-spike topography, while energy-dispersive X-ray spectroscopy identified minor Au (~0.05 at. %) and major N (~1–2 at. %) dopants localized within a 0.5 μm thick surface layer and the slight surface post-oxidation of the micro-relief (oxygen (O), ~1.5–2.5 at. %). X-ray photoelectron spectroscopy was used to identify the bound surface (SiNx) and bulk doping chemical states of the introduced nitrogen (~10 at. %) and the metallic (<0.01 at. %) and cluster (<0.1 at. %) forms of the gold dopant, and it was used to evaluate their depth distributions, which were strongly affected by the competition between gold dopants due to their marginal local concentrations and the other more abundant dopants (N, O). In this study, 532 nm Raman microspectroscopy indicated a slight reduction in the crystalline order revealed in the second-order Si phonon band; the tensile stresses or nanoscale dimensions of the resolidified Si nano-crystallites envisioned by the main Si optical–phonon peak; a negligible a-Si abundance; and a low-wavenumber peak of the Si3N4 structure. In contrast, Fourier transform infrared (FT-IR) reflectance and transmittance studies exhibited only broad structureless absorption bands in the range of 600–5500 cm−1 related to dopant absorption and light trapping in the surface micro-relief. The room-temperature electrical characteristics of the laser double-doped Si layer—a high carrier mobility of 1050 cm2/Vs and background carrier sheet concentration of ~2 × 1010 cm−2 (bulk concentration ~1014–1015 cm−3)—are superior to previously reported parameters of similar nitrogen-implanted/annealed Si samples. This novel facile double-element laser-doping procedure paves the way to local maskless on-demand introductions of multiple intra-gap intermediate donor and acceptor bands in Si, providing related multi-wavelength IR photoconductivity for optoelectronic applications. Full article
(This article belongs to the Section Innovations in Materials Processing)
Show Figures

Figure 1

4 pages, 157 KiB  
Editorial
Summary Editorial on Wearable Technology in Exercise and Sport Applications
by James W. Navalta
Technologies 2024, 12(11), 223; https://doi.org/10.3390/technologies12110223 - 7 Nov 2024
Viewed by 1071
Abstract
We recently closed the second of two Special Issues centered around wearable technology use in exercise and sport applications [...] Full article
(This article belongs to the Special Issue Wearable Technologies III)
59 pages, 11596 KiB  
Review
Fake News Detection Revisited: An Extensive Review of Theoretical Frameworks, Dataset Assessments, Model Constraints, and Forward-Looking Research Agendas
by Sheetal Harris, Hassan Jalil Hadi, Naveed Ahmad and Mohammed Ali Alshara
Technologies 2024, 12(11), 222; https://doi.org/10.3390/technologies12110222 - 6 Nov 2024
Viewed by 1905
Abstract
The emergence and acceptance of digital technology have caused information pollution and an infodemic on Online Social Networks (OSNs), blogs, and online websites. The malicious broadcast of illegal, objectionable and misleading content causes behavioural changes and social unrest, impacts economic growth and national [...] Read more.
The emergence and acceptance of digital technology have caused information pollution and an infodemic on Online Social Networks (OSNs), blogs, and online websites. The malicious broadcast of illegal, objectionable and misleading content causes behavioural changes and social unrest, impacts economic growth and national security, and threatens users’ safety. The proliferation of AI-generated misleading content has further intensified the current situation. In the previous literature, state-of-the-art (SOTA) methods have been implemented for Fake News Detection (FND). However, the existing research lacks multidisciplinary considerations for FND based on theories on FN and OSN users. Theories’ analysis provides insights into effective and automated detection mechanisms for FN, and the intentions and causes behind wide-scale FN propagation. This review evaluates the available datasets, FND techniques, and approaches and their limitations. The novel contribution of this review is the analysis of the FND in linguistics, healthcare, communication, and other related fields. It also summarises the explicable methods for FN dissemination, identification and mitigation. The research identifies that the prediction performance of pre-trained transformer models provides fresh impetus for multilingual (even for resource-constrained languages), multidomain, and multimodal FND. Their limits and prediction capabilities must be harnessed further to combat FN. It is possible by large-sized, multidomain, multimodal, cross-lingual, multilingual, labelled and unlabelled dataset curation and implementation. SOTA Large Language Models (LLMs) are the innovation, and their strengths should be focused on and researched to combat FN, deepfakes, and AI-generated content on OSNs and online sources. The study highlights the significance of human cognitive abilities and the potential of AI in the domain of FND. Finally, we suggest promising future research directions for FND and mitigation. Full article
Show Figures

Figure 1

14 pages, 3480 KiB  
Review
Towards the Future of Ubiquitous Hyperspectral Imaging: Innovations in Sensor Configurations and Cost Reduction for Widespread Applicability
by Ivan Podlesnykh, Michael Kovalev and Pavel Platonov
Technologies 2024, 12(11), 221; https://doi.org/10.3390/technologies12110221 - 6 Nov 2024
Viewed by 1383
Abstract
Hyperspectral imaging is currently under active development as a method for remote sensing, environmental monitoring and biomedical diagnostics. The development of hyperspectral sensors is aimed at their miniaturization and reducing the cost of components for the purpose of the widespread use of such [...] Read more.
Hyperspectral imaging is currently under active development as a method for remote sensing, environmental monitoring and biomedical diagnostics. The development of hyperspectral sensors is aimed at their miniaturization and reducing the cost of components for the purpose of the widespread use of such devices on unmanned aerial vehicles and satellites. In this review, we present a broad overview of recent work on the development of hyperspectral devices’ configurations, studies aimed at modifying sensors and the possibility of reducing the cost of components of such devices. In addition, we will present the main trends in the development of hyperspectral device configurations for ubiquitous applications. Full article
Show Figures

Figure 1

23 pages, 9327 KiB  
Article
Increasing the Robustness of Image Quality Assessment Models Through Adversarial Training
by Anna Chistyakova, Anastasia Antsiferova, Maksim Khrebtov, Sergey Lavrushkin, Konstantin Arkhipenko, Dmitriy Vatolin and Denis Turdakov
Technologies 2024, 12(11), 220; https://doi.org/10.3390/technologies12110220 - 5 Nov 2024
Viewed by 1174
Abstract
The adversarial robustness of image quality assessment (IQA) models to adversarial attacks is emerging as a critical issue. Adversarial training has been widely used to improve the robustness of neural networks to adversarial attacks, but little in-depth research has examined adversarial training as [...] Read more.
The adversarial robustness of image quality assessment (IQA) models to adversarial attacks is emerging as a critical issue. Adversarial training has been widely used to improve the robustness of neural networks to adversarial attacks, but little in-depth research has examined adversarial training as a way to improve IQA model robustness. This study introduces an enhanced adversarial training approach tailored to IQA models; it adjusts the perceptual quality scores of adversarial images during training to enhance the correlation between an IQA model’s quality and the subjective quality scores. We also propose a new method for comparing IQA model robustness by measuring the Integral Robustness Score; this method evaluates the IQA model resistance to a set of adversarial perturbations with different magnitudes. We used our adversarial training approach to increase the robustness of five IQA models. Additionally, we tested the robustness of adversarially trained IQA models to 16 adversarial attacks and conducted an empirical probabilistic estimation of this feature. Full article
Show Figures

Figure 1

21 pages, 655 KiB  
Article
Generative Models for Source Code: Fine-Tuning Techniques for Structured Pattern Learning
by Valentina Franzoni, Silvia Tagliente and Alfredo Milani
Technologies 2024, 12(11), 219; https://doi.org/10.3390/technologies12110219 - 4 Nov 2024
Viewed by 1356
Abstract
This study addresses the problem of how to automatically generate source code that is not only functional, but also well-structured, readable, and maintainable. Existing generative models for source code often produce functional code, but they lack consistency in structure and adherence to coding [...] Read more.
This study addresses the problem of how to automatically generate source code that is not only functional, but also well-structured, readable, and maintainable. Existing generative models for source code often produce functional code, but they lack consistency in structure and adherence to coding standards, essential for integration into existing application development projects and long-term software maintenance. By training the model on specific code structures, including a dataset with Italian annotations, the proposed methodology ensures that the generated code is compliant with both the functional requirements and the pre-defined coding standards. The methodology proposed in this study applies transfer learning techniques on the DeepSeek Coder model, to refine pre-trained models to generate code that integrates additional structuring constraints. By training the model on specific code structures, including a dataset with Italian comments, the proposed methodology ensures that the generated code meets both functional requirements and coding structure. Experimental results, evaluated using the perplexity metric, demonstrate the effectiveness of the proposed approach, which impacts the goals of reducing errors, and ultimately improves software development quality. Full article
Show Figures

Graphical abstract

28 pages, 32137 KiB  
Article
Path Tracking Control for Four-Wheel Independent Steering and Driving Vehicles Based on Improved Deep Reinforcement Learning
by Xia Hua, Tengteng Zhang, Xiangle Cheng and Xiaobin Ning
Technologies 2024, 12(11), 218; https://doi.org/10.3390/technologies12110218 - 4 Nov 2024
Viewed by 1281
Abstract
We propose a compound control framework to improve the path tracking accuracy of a four-wheel independent steering and driving (4WISD) vehicle in complex environments. The framework consists of a deep reinforcement learning (DRL)-based auxiliary controller and a dual-layer controller. Samples in the 4WISD [...] Read more.
We propose a compound control framework to improve the path tracking accuracy of a four-wheel independent steering and driving (4WISD) vehicle in complex environments. The framework consists of a deep reinforcement learning (DRL)-based auxiliary controller and a dual-layer controller. Samples in the 4WISD vehicle control framework have the issues of skewness and sparsity, which makes it difficult for the DRL to converge. We propose a group intelligent experience replay (GER) mechanism that non-dominantly sorts the samples in the experience buffer, which facilitates within-group and between-group collaboration to achieve a balance between exploration and exploitation. To address the generalization problem in the complex nonlinear dynamics of 4WISD vehicles, we propose an actor-critic architecture based on the method of two-stream information bottleneck (TIB). The TIB method is used to remove redundant information and extract high-dimensional features from the samples, thereby reducing generalization errors. To alleviate the overfitting of DRL to known data caused by IB, the reverse information bottleneck (RIB) alters the optimization objective of IB, preserving the discriminative features that are highly correlated with actions and improving the generalization ability of DRL. The proposed method significantly improves the convergence and generalization capabilities of DRL, while effectively enhancing the path tracking accuracy of 4WISD vehicles in high-speed, large-curvature, and complex environments. Full article
Show Figures

Figure 1

30 pages, 618 KiB  
Article
Benchmarking Big Data Systems: Performance and Decision-Making Implications in Emerging Technologies
by Leonidas Theodorakopoulos, Aristeidis Karras, Alexandra Theodoropoulou and Georgios Kampiotis
Technologies 2024, 12(11), 217; https://doi.org/10.3390/technologies12110217 - 3 Nov 2024
Viewed by 1740
Abstract
Systems for graph processing are a key enabler for insights from large-scale graphs that are critical to many new advanced technologies such as Artificial Intelligence, Internet of Things, and blockchain. In this study, we benchmark another two widely utilized graph processing systems, Apache [...] Read more.
Systems for graph processing are a key enabler for insights from large-scale graphs that are critical to many new advanced technologies such as Artificial Intelligence, Internet of Things, and blockchain. In this study, we benchmark another two widely utilized graph processing systems, Apache Spark GraphX and Apache Fink, concerning the key performance criterion by means of response time, scalability, and computational complexity. We demonstrate our results which show the capability of each system for real-world graph applications, and hence, providing a quantitative understanding to select the system for our purpose. GraphX’s strength was in processing batch in-memory workloads typical of blockchain and machine learning model optimization, while Flink excelled in processing stream data, which is timely and important to the IoT world. These performance characteristics emphasize how the capabilities of graph processing systems can match the requirements for the performance of different emerging technology applications. Our findings ultimately inform practitioners about system efficiencies and limitations, but also the recent advances in hardware accelerators and algorithmic improvements aimed at shaping the new graph processing frontier in diverse technology domains. Full article
Show Figures

Figure 1

15 pages, 5779 KiB  
Article
Enhancing Visual Perception in Immersive VR and AR Environments: AI-Driven Color and Clarity Adjustments Under Dynamic Lighting Conditions
by Maryam Abbasi, Paulo Váz, José Silva and Pedro Martins
Technologies 2024, 12(11), 216; https://doi.org/10.3390/technologies12110216 - 3 Nov 2024
Viewed by 1336
Abstract
The visual fidelity of virtual reality (VR) and augmented reality (AR) environments is essential for user immersion and comfort. Dynamic lighting often leads to chromatic distortions and reduced clarity, causing discomfort and disrupting user experience. This paper introduces an AI-driven chromatic adjustment system [...] Read more.
The visual fidelity of virtual reality (VR) and augmented reality (AR) environments is essential for user immersion and comfort. Dynamic lighting often leads to chromatic distortions and reduced clarity, causing discomfort and disrupting user experience. This paper introduces an AI-driven chromatic adjustment system based on a modified U-Net architecture, optimized for real-time applications in VR/AR. This system adapts to dynamic lighting conditions, addressing the shortcomings of traditional methods like histogram equalization and gamma correction, which struggle with rapid lighting changes and real-time user interactions. We compared our approach with state-of-the-art color constancy algorithms, including Barron’s Convolutional Color Constancy and STAR, demonstrating superior performance. Experimental results from 60 participants show significant improvements, with up to 41% better color accuracy and 39% enhanced clarity under dynamic lighting conditions. The study also included eye-tracking data, which confirmed increased user engagement with AI-enhanced images. Our system provides a practical solution for developers aiming to improve image quality, reduce visual discomfort, and enhance overall user satisfaction in immersive environments. Future work will focus on extending the model’s capability to handle more complex lighting scenarios. Full article
(This article belongs to the Section Information and Communication Technologies)
Show Figures

Figure 1

16 pages, 4393 KiB  
Article
A Field-Programmable Gate Array-Based Quasi-Cyclic Low-Density Parity-Check Decoder with High Throughput and Excellent Decoding Performance for 5G New-Radio Standards
by Bilal Mejmaa, Ismail Akharraz and Abdelaziz Ahaitouf
Technologies 2024, 12(11), 215; https://doi.org/10.3390/technologies12110215 - 31 Oct 2024
Viewed by 1141
Abstract
This work presents a novel fully parallel decoder architecture designed for high-throughput decoding of Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes within the context of 5G New-Radio (NR) communication. The design uses the layered Min-Sum (MS) algorithm and focuses on increasing throughput to meet the [...] Read more.
This work presents a novel fully parallel decoder architecture designed for high-throughput decoding of Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes within the context of 5G New-Radio (NR) communication. The design uses the layered Min-Sum (MS) algorithm and focuses on increasing throughput to meet the strict needs of enhanced Mobile BroadBand (eMBB) applications. We incorporated a Sub-Optimal Low-Latency (SOLL) technique to enhance the critical check node processing stage inherent to the MS algorithm. This technique efficiently computes the two minimum values, rendering the architecture well-suited for specific Ultra-Reliable Low-Latency Communication (URLLC) scenarios. We design the decoder to be reconfigurable, enabling efficient operation across all expansion factors. We rigorously validate the decoder’s effectiveness through meticulous bit-error-rate (BER) performance evaluations using Hardware Description Language (HDL) co-simulation. This co-simulation utilizes a well-established suite of tools encompassing MATLAB/Simulink for system modeling and Vivado, a prominent FPGA design suite, for hardware representation. With 380,737 Look-Up Tables (LUTs) and 32,898 registers, the decoder’s implementation on a Virtex-7 XC7VX980T FPGA platform by AMD/Xilinx shows good hardware utilization. The architecture attains a robust operating frequency of 304.5 MHz and a normalized throughput of 49.5 Gbps, marking a 36% enhancement compared to the state-of-the-art. This advancement propels decoding capabilities to meet the demands of high-speed data processing. Full article
Show Figures

Figure 1

15 pages, 18517 KiB  
Article
Rice Leaf Disease Classification—A Comparative Approach Using Convolutional Neural Network (CNN), Cascading Autoencoder with Attention Residual U-Net (CAAR-U-Net), and MobileNet-V2 Architectures
by Monoronjon Dutta, Md Rashedul Islam Sujan, Mayen Uddin Mojumdar, Narayan Ranjan Chakraborty, Ahmed Al Marouf, Jon G. Rokne and Reda Alhajj
Technologies 2024, 12(11), 214; https://doi.org/10.3390/technologies12110214 - 29 Oct 2024
Viewed by 2012
Abstract
Classifying rice leaf diseases in agricultural technology helps to maintain crop health and to ensure a good yield. In this work, deep learning algorithms were, therefore, employed for the identification and classification of rice leaf diseases from images of crops in the field. [...] Read more.
Classifying rice leaf diseases in agricultural technology helps to maintain crop health and to ensure a good yield. In this work, deep learning algorithms were, therefore, employed for the identification and classification of rice leaf diseases from images of crops in the field. The initial algorithmic phase involved image pre-processing of the crop images, using a bilateral filter to improve image quality. The effectiveness of this step was measured by using metrics like the Structural Similarity Index (SSIM) and the Peak Signal-to-Noise Ratio (PSNR). Following this, this work employed advanced neural network architectures for classification, including Cascading Autoencoder with Attention Residual U-Net (CAAR-U-Net), MobileNetV2, and Convolutional Neural Network (CNN). The proposed CNN model stood out, since it demonstrated exceptional performance in identifying rice leaf diseases, with test Accuracy of 98% and high Precision, Recall, and F1 scores. This result highlights that the proposed model is particularly well suited for rice leaf disease classification. The robustness of the proposed model was validated through k-fold cross-validation, confirming its generalizability and minimizing the risk of overfitting. This study not only focused on classifying rice leaf diseases but also has the potential to benefit farmers and the agricultural community greatly. This work highlights the advantages of custom CNN models for efficient and accurate rice leaf disease classification, paving the way for technology-driven advancements in farming practices. Full article
(This article belongs to the Section Information and Communication Technologies)
Show Figures

Figure 1

1 pages, 173 KiB  
Retraction
RETRACTED: Galeoto et al. Assessment Capacity of the Armeo® Power: Cross-Sectional Study. Technologies 2023, 11, 125
by Giovanni Galeoto, Anna Berardi, Massimiliano Mangone, Leonardo Tufo, Martina Silvani, Jerónimo González-Bernal and Jesús Seco-Calvo
Technologies 2024, 12(11), 213; https://doi.org/10.3390/technologies12110213 - 28 Oct 2024
Viewed by 964
Abstract
The Technologies Editoral Office retracts the article titled “Assessment Capacity of the Armeo® Power: Cross-Sectional Study” [...] Full article
9 pages, 204 KiB  
Editorial
Perspectives, Challenges, and the Future of Biomedical Technology and Artificial Intelligence
by Saul Tovar-Arriaga, Gerardo Israel Pérez-Soto, Karla Anhel Camarillo-Gómez, Marcos Aviles and Juvenal Rodríguez-Reséndiz
Technologies 2024, 12(11), 212; https://doi.org/10.3390/technologies12110212 - 24 Oct 2024
Viewed by 1484
Abstract
Biomedical technologies are the compound of engineering principles and technologies used to diagnose, treat, monitor, and prevent illness [...] Full article
23 pages, 11204 KiB  
Article
Wireless Dynamic Sensor Network for Water Quality Monitoring Based on the IoT
by Mauro A. López-Munoz, Richard Torrealba-Melendez, Cesar A. Arriaga-Arriaga, Edna I. Tamariz-Flores, Mario López-López, Félix Quirino-Morales, Jesus M. Munoz-Pacheco and Fernando López-Marcos
Technologies 2024, 12(11), 211; https://doi.org/10.3390/technologies12110211 - 23 Oct 2024
Viewed by 1484
Abstract
Water is a critical resource for human survival worldwide, and its availability and quality in natural reservoirs such as lakes and rivers must be monitored. In that way, wireless dynamic sensor networks can help monitor water quality. These networks have significantly advanced across [...] Read more.
Water is a critical resource for human survival worldwide, and its availability and quality in natural reservoirs such as lakes and rivers must be monitored. In that way, wireless dynamic sensor networks can help monitor water quality. These networks have significantly advanced across various sectors, including industrial automation and environmental monitoring. Moreover, the Internet of Things has emerged as a global technological marvel, garnering interest for its ability to facilitate information visualization and ease of deployment—the combination of wireless dynamic sensor networks and the Internet of Things improves water monitoring and helps to care for this vital resource. This article presents the design and deployment of a wireless dynamic sensor network comprising a mobile node outfitted with multiple sensors for remote aquatic navigation and a stationary node similarly equipped and linked to a server via the IoT. Both nodes can measure parameters like pH, temperature, and total dissolved solids (TDS), enabling real-time data monitoring through a user interface and generating a database for future reference. The integrated control system within the developed interface enhances the mobile node’s ability to survey various points of interest. The developed project enabled real-time monitoring of the aforementioned parameters, with the recorded data being stored in a database for subsequent graphing and analysis using the IoT. The system facilitated data collection at various points of interest, allowing for a graphical representation of parameter evolution. This included consistent temperature trends, neutral and alkaline zone data for pH levels, and variations in total dissolved solids (TDS) recorded by the mobile node, reaching up to 100 ppm. Full article
(This article belongs to the Special Issue IoT-Enabling Technologies and Applications)
Show Figures

Figure 1

20 pages, 2669 KiB  
Review
Exploring Silica Nanoparticles: A Sustainable Solution for Pest Control in Sri Lankan Rice Farming
by Zeyu Wang, Nirusha Thavarajah and Xavier Fernando
Technologies 2024, 12(11), 210; https://doi.org/10.3390/technologies12110210 - 23 Oct 2024
Viewed by 2005
Abstract
Rice cultivation stands as a cornerstone of Sri Lanka’s economy, serving as a vital source of employment for rural communities. However, the constraints of limited land availability have prompted an escalating dependence on agrochemicals, notably for pest management, thereby posing significant threats to [...] Read more.
Rice cultivation stands as a cornerstone of Sri Lanka’s economy, serving as a vital source of employment for rural communities. However, the constraints of limited land availability have prompted an escalating dependence on agrochemicals, notably for pest management, thereby posing significant threats to human health and the environment. This review delves into the exploration of silica nanoparticles as a promising eco-friendly substitute for conventional pesticides in the context of Sri Lankan rice farming. It comprehensively examines various aspects, including the synthesis methods of silica nanoparticles, their encapsulation with synthetic pesticides, and an evaluation of their efficacy in pest control. Furthermore, it sheds light on the innovative utilization of agricultural waste such as rice husk and straw in the production of silica-based nanopesticides. This approach not only demonstrates a shift towards sustainable agricultural practices but also aligns with the principles of green chemistry and circular economy, offering a holistic solution to the challenges faced by the rice farming sector in Sri Lanka. Full article
(This article belongs to the Special Issue Technological Advances in Science, Medicine, and Engineering 2024)
Show Figures

Figure 1

19 pages, 3846 KiB  
Article
Improving Diabetes Education and Metabolic Control in Children Using Social Robots: A Randomized Trial
by Tareq Alhmiedat, Laila A. AlBishi, Fady Alnajjar, Mohammed Alotaibi, Ashraf M. Marei and Rakan Shalayl
Technologies 2024, 12(11), 209; https://doi.org/10.3390/technologies12110209 - 23 Oct 2024
Viewed by 1326
Abstract
Robot engagement in healthcare has the potential to alleviate medical personnel workload while improving efficiency in managing various health conditions. This study evaluates the impact of robot-assisted education on knowledge acquisition and metabolic control in children with Type 1 Diabetes Mellitus (T1DM) compared [...] Read more.
Robot engagement in healthcare has the potential to alleviate medical personnel workload while improving efficiency in managing various health conditions. This study evaluates the impact of robot-assisted education on knowledge acquisition and metabolic control in children with Type 1 Diabetes Mellitus (T1DM) compared to traditional education methods. A randomized controlled trial was conducted at the pediatric diabetes clinic of the University of Tabuk Medical Center, Saudi Arabia. Thirty children aged 5–15 years with T1DM were randomly divided into two groups: the robot education (intervention) group and the control education group. Both groups participated in six weekly one-hour educational sessions, with the intervention group interacting with a Pepper robot assistant and the control group receiving education from a qualified diabetes educator nurse. Knowledge was assessed using a 12-item questionnaire before and after the intervention, while metabolic control was evaluated through weekly mean home blood glucose measurements and HbA1c levels before and three months post intervention. The intervention group demonstrated a significantly greater improvement in knowledge scores compared to the control group (p < 0.05). Weekly mean blood glucose levels were consistently lower in the intervention group throughout the study period (p < 0.05 for all samples). Both groups showed a reduction in HbA1c levels after three months, with the intervention group exhibiting a greater mean decrease. The engagement of the Pepper robot in T1DM education for children resulted in improved knowledge acquisition and better metabolic control compared to traditional education methods. This approach may establish a foundation for “learning by interacting with robots” in long-term diabetes management. Further research with larger sample sizes and longer follow-up periods is warranted to confirm these findings and explore the long-term benefits of robot-assisted education in pediatric diabetes care. Full article
(This article belongs to the Special Issue Advanced Autonomous Systems and Artificial Intelligence Stage)
Show Figures

Figure 1

26 pages, 4564 KiB  
Article
Agent-Based Trust and Reputation Model in Smart IoT Environments
by Mohammad Al-Shamaileh, Patricia Anthony and Stuart Charters
Technologies 2024, 12(11), 208; https://doi.org/10.3390/technologies12110208 - 22 Oct 2024
Viewed by 1291
Abstract
The Internet of Things (IoT) enables smart devices to connect, share and exchange data with each other through the internet. Since an IoT environment is open and dynamic, IoT participants may need to collaborate with unknown entities with no proven track record. To [...] Read more.
The Internet of Things (IoT) enables smart devices to connect, share and exchange data with each other through the internet. Since an IoT environment is open and dynamic, IoT participants may need to collaborate with unknown entities with no proven track record. To ensure successful collaboration among these entities, it is important to establish a mechanism that ensures all entities operate in a trustworthy manner. We present a trust and reputation model that can be used to select the best service provider in an IoT environment. Our proposed model, IoT-CADM (Comprehensive Agent-based Decision-making Model for IoT) is an agent-based decentralised trust and reputation model that can be used to select the best service provider for a particular service based on multi-context quality of service. IoT-CADM is developed using a smart multi-agent IoT environment where information about entities is collected and evaluated using a trust and reputation algorithm. We evaluated the performance of the proposed model against some other well-known models in a simulated smart factory supply chain system. Our experimental results showed that the proposed IoT-CADM achieved the best performance. Full article
(This article belongs to the Section Information and Communication Technologies)
Show Figures

Figure 1

Previous Issue
Next Issue
Back to TopTop