Skip to Content
AerospaceAerospace
  • Article
  • Open Access

4 July 2026

27 Pages

Aero-Propulsive-Elastic Coupled Modeling of Distributed Electric Propulsion Systems with Slipstream Interactions

,
,
and
1
School of Aeronautics and Astronautics, Shanghai Jiao Tong University, Shanghai 200240, China
2
AECC Hunan Aviation Powerplant Research Institute, Zhuzhou 412002, China
*
Author to whom correspondence should be addressed.

Abstract

The distributed electric propulsion (DEP) system offers significant potential for enhancing aerodynamic efficiency, reducing emissions, and enabling innovative aerodynamic configurations. However, the strong coupling between propeller slipstream effects and wing structural dynamics presents new challenges for aeroelastic analysis. To address this issue, this paper proposes an aeroelastic modeling approach tailored for DEP systems that systematically accounts for the effects induced by propeller slipstreams. Specifically, the induced velocity generated by the propeller slipstreams is computed using a slipstream tube model and incorporated into the unsteady aerodynamic modeling via the unsteady vortex lattice method. Under appropriate assumptions, a state-space formulation of the unsteady aerodynamic forces is derived, while the wing structural dynamics are represented using the finite element method. After establishing the subsystem models, a complete aeroelastic model of the DEP system is assembled based on the input–output relationships among the subsystems. Nonlinear simulations are conducted using this integrated model. The results demonstrate the potential of distributed propellers for suppressing wing vibrations and alleviating structural loads.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.