Skip to Content
AerospaceAerospace
  • Article
  • Open Access

21 November 2026

31 Pages

Experimental Characterization and Modeling of an Aircraft Nose Landing Gear Tire for Ground-Dynamics Applications

,
and
1
Chair of Air Transport Technology and Logistics, TUD Dresden University of Technology, 01062 Dresden, Germany
2
Chair of Automobile Engineering, TUD Dresden University of Technology, 01062 Dresden, Germany
*
Author to whom correspondence should be addressed.
Aerospace2026, 13(12), 1093;https://doi.org/10.3390/aerospace13121093 
(registering DOI)
This article belongs to the Special Issue Advances in Landing Systems Engineering (2nd Edition)

Abstract

Aircraft tires form a safety-critical interface between pavement and landing gear and transmit substantial loads during ground operations. Reliable tire-property data are therefore required for ground-dynamics models and load-based assessment. This study experimentally characterizes a current-generation radial nose landing gear tire on a full-scale test rig. The test program comprises quasi-static stiffness measurements and rolling tests of cornering behavior and vertical obstacle response under varied vertical load, inflation pressure, and rolling speed. Longitudinal stiffness ranged from approximately 1150N/mm to 1290N/mm, while vertical stiffness increased by approximately 40N/mm per 0.1MPa and differed by about 190N/mm between flat-plate and cleat compression. Cornering stiffness increased strongly from 10kN to 17.5kN, with diminishing load sensitivity toward 20kN, whereas speed effects were comparatively small. Tire enveloping stiffness ranged from 137N/mm to 449N/mm, and cleat-induced vertical-force amplification generally increased with speed. The processed cornering measurements were subsequently used to parameterize a Magic Formula 6.2 (MF6.2) model for steady-state pure lateral-slip behavior. The experimental dataset and calibrated model support future ground-dynamics simulations and load-monitoring applications. However, evaluation was limited to calibration conditions; predictive accuracy, particularly at higher tire loads, requires independent validation.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.