Abstract
Most asteroids are loose rubble piles and not monolithic boulders. The size and arrangement of the rubble particles affect their structural stiffness, thereby influencing their damage under explosive loads. Mesoscopic numerical models represent the actual fragmentation and disruption of asteroids better than monolithic models. This study constructs two idealized meso-models of asteroid 25143 Itokawa based on the reported bulk density and porosity: one composed entirely of small rubble particles, and the other of a mixture of rubble and large boulders. For both meso-models, an idealized 300 kt 2,4,6-trinitrotoluene (TNT) equivalent high-energy source was applied 10 m below the surface of the asteroid’s head and body, and the target response was simulated using the single-material arbitrary Lagrangian–Eulerian (ALE) and finite element–smooth particle hydrodynamics (FE-SPH) methods. Shock-wave propagation analysis revealed the effect of porosity and rubble accumulation on asteroid damage. In addition, to investigate the effects of porosity and interrubble cohesion on momentum transfer, we established spherical asteroids with varying porosities (0, 10, 20, 30, 40, and 50%) and mesostructures, and set different cohesive strengths (0.1, 10, and 1000 kPa) between the rubble particles. For the 300 kt, 10 m subsurface loading condition, the total early-time candidate-ejecta momentum is less sensitive to the tested cohesive-strength range (0.1–1000 kPa) than to porosity. At the same porosity, the asteroid mesostructure substantially affects the ejecta momentum.