Next Article in Journal
Micro-Systems Production: A Promising New Technique with Low Energy Consumption
Previous Article in Journal
Continuous Flow Manufacturing for API: From Potential Evaluation to Production Scale Realization
 
 
Scientia Pharmaceutica is published by MDPI from Volume 84 Issue 3 (2016). Previous articles were published by another publisher in Open Access under a CC-BY (or CC-BY-NC-ND) licence, and they are hosted by MDPI on mdpi.com as a courtesy and upon agreement with Austrian Pharmaceutical Society (Österreichische Pharmazeutische Gesellschaft, ÖPhG).
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Conference Report

Optimization of Freeze Drying Process Using Isomalt as Bulking Agent

1
Department of Pharmaceutics, Semmelweis University, Budapest, Hungary
2
BENEO-Palatinit GmbH, Mannheim, Germany
*
Author to whom correspondence should be addressed.
Sci. Pharm. 2010, 78(3), 669; https://doi.org/10.3797/scipharm.cespt.8.PMS42
Submission received: 12 July 2010 / Accepted: 12 July 2010 / Published: 12 July 2010

Abstract

Freeze dried products form a special group of sterile medications because of the unique manufacturing process. [...]

Share and Cite

MDPI and ACS Style

KOVÁCS, K.; KÁLLAI, N.; STAMPF, G.; KLEBOVICH, I.; LUDÁNYI, K.; LUHN, O.; ANTAL, I. Optimization of Freeze Drying Process Using Isomalt as Bulking Agent. Sci. Pharm. 2010, 78, 669. https://doi.org/10.3797/scipharm.cespt.8.PMS42

AMA Style

KOVÁCS K, KÁLLAI N, STAMPF G, KLEBOVICH I, LUDÁNYI K, LUHN O, ANTAL I. Optimization of Freeze Drying Process Using Isomalt as Bulking Agent. Scientia Pharmaceutica. 2010; 78(3):669. https://doi.org/10.3797/scipharm.cespt.8.PMS42

Chicago/Turabian Style

KOVÁCS, K., N. KÁLLAI, G. STAMPF, I. KLEBOVICH, K. LUDÁNYI, O. LUHN, and I. ANTAL. 2010. "Optimization of Freeze Drying Process Using Isomalt as Bulking Agent" Scientia Pharmaceutica 78, no. 3: 669. https://doi.org/10.3797/scipharm.cespt.8.PMS42

APA Style

KOVÁCS, K., KÁLLAI, N., STAMPF, G., KLEBOVICH, I., LUDÁNYI, K., LUHN, O., & ANTAL, I. (2010). Optimization of Freeze Drying Process Using Isomalt as Bulking Agent. Scientia Pharmaceutica, 78(3), 669. https://doi.org/10.3797/scipharm.cespt.8.PMS42

Article Metrics

Back to TopTop