Linking Rheological Key Parameters of Pharmaceutical Powders to Mixing Properties

SCHEIBELHOFER, O.; BALAK, N.; KOLLER, D. M.; FRASER, S. D.; FREEMAN, T.; KHINAST, J. G.

doi:10.3797/scipharm.cespt.8.PMS08

Scientia Pharmaceutica is published by MDPI from Volume 84 Issue 3 (2016). Previous articles were published by another publisher in Open Access under a CC-BY (or CC-BY-NC-ND) licence, and they are hosted by MDPI on mdpi.com as a courtesy and upon agreement with Austrian Pharmaceutical Society (Österreichische Pharmazeutische Gesellschaft, ÖPhG).

Conference Report

12 July 2010

1 Page

Linking Rheological Key Parameters of Pharmaceutical Powders to Mixing Properties

and

Research Center Pharmaceutical Engineering GmbH, Graz, Austria

Freeman Technology, Worcestershire, United Kingdom

Institute for Process and Particle Engineering, University of Technology, Graz, Austria

Author to whom correspondence should be addressed.

Sci. Pharm.2010, 78(3), 635;https://doi.org/10.3797/scipharm.cespt.8.PMS08

Version Notes

Order Reprints

Abstract

The application of process analytical technology (PAT) has opened the possibility for continuous process monitoring and quality control in the pharmaceutical industry. [...]

Article Metrics

Citations

Article Access Statistics

Journal Statistics

Multiple requests from the same IP address are counted as one view.

Quantitative Quasi-Simultaneous and Spatially Resolved Real-time Monitoring of Powder Mixing Processes with a Multiple NIR-Probe Setup

Simulation of Fluid Mixing and Dissolution Processes