Abstract
This review examines Global Navigation Satellite System (GNSS) wave buoys from measurement principles and wave-parameter retrieval to representative systems and applications. By tracking buoy motion through three-dimensional position or velocity measurements, GNSS-based approaches offer diverse alternatives to conventional inertial-sensor buoys and potential for low-cost deployment at scale. We distinguish displacement-based from velocity-based methods according to their primary observables. Reference-station-dependent displacement methods can achieve positioning accuracies of 2–10 cm within approximately 50 km of shore, whereas Doppler and carrier-phase methods have reported velocity measurement accuracies of approximately 2–20 cm/s and 2–10 mm/s, respectively. These velocity-based methods offer potential for open-ocean deployment, provided that velocity observations are integrated or converted in the spectral domain. Our synthesis indicates that accuracy of displacement retrieval within the target wave band provides a more meaningful basis for comparing methods than raw-observation accuracy alone. Measurement errors do not necessarily propagate proportionally into derived wave parameters, with significant wave height and mean wave period generally showing good agreement across approaches. However, platform-dependent motion response limits the frequency range over which sea-surface motion can be reliably resolved. GNSS wave buoys already support in situ monitoring, satellite-product validation and wave-forecast evaluation; advances in accuracy and lighter platforms could broaden their use.