Skip to Content
CosmeticsCosmetics
  • Article
  • Open Access

16 November 2026

32 Pages

Computational Biomechanical Analysis of the MD Codes Sequence

,
,
,
,
and
1
Research and Innovation Hub, Innovation Aesthetics, London WC2H 9JQ, UK
2
The Skin Address, Aesthetic Dermatology Practice, Bangalore 560080, India
3
Woffles Wu Aesthetic Surgery and Laser Centre, Camden Medical Centre, 1 Orchard Boulevard, Suite 09-02, Singapore 248649, Singapore
4
Royal Free Hospital, Pond Street, Hampstead, London NW3 2QG, UK
This article belongs to the Section Cosmetic Technology

Abstract

The MD Codes™ system is a widely used framework for facial filler treatment, but the biomechanics of its Foundation–Contour–Refinement sequence are unexplored. We performed finite element simulations at 26 MD Codes injection points in 20,000 virtual models, generated by morphing a single baseline facial mesh, and introduce the Tissue Response Vector™ (TRV), an exploratory descriptor of projection (Mp), lift (‖Vl‖), tissue strain (Es), and peri-injection pressure (P). Foundation codes (Ck1, Ck1 TML, and Ck4) had the highest TRV scores (0.81–0.92), lift (0.65–0.82 mm/mL), and strain (10.2–14.3%). Of the three phase orders simulated, the MD Codes sequence produced the highest overall TRV (0.69 ± 0.12), 10–16% above the alternatives. For Ck1, the composite peaked at 0.3 cc; larger volumes reduced lift and increased pressure. Among the nine codes with directly measured surface volume coefficient (SVC) values, the SVC was imprecisely associated with Mp (r = 0.47, 95% CI −0.28 to 0.86) and not with ‖Vl‖ or Es. Six codes sharing one SVC value differed more than twofold in lift and threefold in strain, so the SVC alone could not distinguish their biomechanical roles. These findings provide a biomechanical rationale for the MD Codes sequence that can now be tested in clinical studies.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.