Coatings, Volume 11, Issue 1

In order to improve the friction and wear performance and surface hardness of AISI 1045 steel and expand its application range, this paper carried out the research on friction and wear performance and surface hardness of Zr65Al7.5Ni10Cu17.5 crystalli...

In order to study the blasting effect and the damage to the rock mass when the cutting seam cartridge is eccentrically and uncoupled. The ANSYS/LS-DYNA® nonlinear dynamic platform was used to simulate the blasting effect of five eccentric uncoupl...

Coating the inner surfaces of high-powered plasma processing equipment has become crucial for reducing maintenance costs, process drift, and contaminants. The conventionally preferred alumina (Al2O3) coating has been replaced with yttria (Y2O3) due t...

In the present study, the corrosion inhibition effect of Spilanthes acmella aqueous leaves extract (SA-LE) on mild steel was investigated in 1.0 M HCl solution at different temperature using weight loss, Tafel polarization, linear polarization resist...

Electric noise spectroscopy is a non-destructive and a very sensitive method for studying the dynamic behaviors of the charge carriers and the kinetic processes in several condensed matter systems, with no limitation on operating temperatures. This t...

In this study, carboxymethyl cellulose (CMC) films containing 1%, 2%, and 3% Chinese fir essential oil (CFEO) were prepared. The mechanical, optical, physical, microstructural, thermal stability and antimicrobial properties of the films were studied....

Inspired by lotus leaves in nature, superhydrophobic surfaces have attracted extensive attention in many fields. However, their complex preparation process, poor durability and high cost seriously restrict their large-scale application in industrial...

The development of antifouling (AF) technology for marine environments is an area of intense research given the severe economic and ecological effects of marine biofouling. Preliminary data from in vitro assays is frequently used to screen the perfor...

Parquet flooring is one of the most common types of flooring, the surface of which can be covered with various coatings. To avoid possible damage to the parquet during use, it is necessary to test the surfaces before installation according to various...

Indium tin oxide (ITO) thin films are widely used as transparent electrodes in electronic devices. Many of those electronic devices are heat sensitive, thus their manufacturing process steps should not exceed 100 °C. Manufacturing competitive hig...