Skip to Content
You are currently on the new version of our website. Access the old version .
MembranesMembranes
  • Article
  • Open Access

20 February 2026

13 Pages

Beyond Visual Observations: Establishing the Mechanical Stability Threshold of Nanothin Polyethylene Layers

,
,
and
1
Department of Chemical Engineering, Universidad Michoacana de San Nicolás de Hidalgo, Morelia 58000, Mexico
2
Department of Physico-Mathematical Sciences, Universidad Michoacana de San Nicolás de Hidalgo, Morelia 58000, Mexico
*
Author to whom correspondence should be addressed.

Abstract

This paper investigates the mechanical stability and critical thickness of free-standing, ultrathin molten polyethylene films using Molecular Dynamics simulations. By comparing the “interfacial drying” and “film stretching” methodologies, this research establishes that both methods consistently identify a stability threshold where continuous films transition into fibrillar and void structures known as “crazes”. A key finding is that films at extremely reduced thicknesses exhibit an anisotropic pressure profile in their core—characterized by a positive normal pressure—which serves as a manifestation of positive disjoining pressure and a precursor to film transformation. Consequently, the study proposes a more rigorous stability criterion based on mechanical isotropy, which yields higher critical thickness values (approximately 6.5 nm at 373.15 K and 9.3 nm at 673.15 K) than those previously estimated from short-term (100 ns) visual observations. Ultimately, the work concludes that maintaining a negative disjoining pressure is fundamental to the structural integrity of these polymeric nanomaterials.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.