Error in Figure
In the original publication [1], there was a mistake in Figure 5a,b. The error in the published SEM image was due to an overlay issue during compilation. The corrected Figure 5a,b appears below.
Figure 5.
Morphological study of (a) SGO at 50 µm magnification and (b) estimated particle size.
The authors would like to apologize for any inconvenience caused. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Reference
- Zahid, M.; Rashid, A.; Akram, S.; Shakir, H.M.F.; Rehan, Z.A.; Javed, T.; Shabbir, R.; Hessien, M.M. Fabrication and Characterization of Sulfonated Graphene Oxide-Doped Polymeric Membranes with Improved Anti-Biofouling Behavior. Membranes 2021, 11, 563. [Google Scholar] [CrossRef] [PubMed]
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content. |
© 2025 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).