We wish to make the following correction to the published paper [1]. Figure 8 in Section 3.1 is incorrect. It should be as follows:
Figure 8.
Simple application of a proposed MIDDA in a first-order high-pass filter with adjustable pole frequency.
The error was introduced during production and is not the fault of the authors. We apologize for any inconvenience caused to the readers and authors by this change. The change does not affect the scientific results. The manuscript will be updated and the original will remain online on the article webpage.
Reference
- Sotner, R.; Jerabek, J.; Prokop, R.; Kledrowetz, V.; Polak, J. A CMOS Multiplied Input Differential Difference Amplifier: A New Active Device and Its Applications. Appl. Sci. 2017, 7, 106. [Google Scholar] [CrossRef]
© 2017 by the author. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license ( http://creativecommons.org/licenses/by/4.0/).