Abstract
The technical condition of the rail bogie suspension systems indicates that a properly controlled damping force can significantly reduce vibrations transmitted to the car body, which directly affects the durability of the components of the running gear and the entire vehicle. Adequate damping quality contributes both to reducing energy consumption and to substantially improving passenger safety and comfort. The analysis of measured vibration accelerations and damper displacements provided insight into the dynamic loading conditions of the secondary suspension system and the differences between the motor and trailer bogies. The results demonstrate differences in the dynamic loading of secondary suspension dampers on the motor and trailer bogies under the investigated operating conditions. The analysis of vibration accelerations showed that the values recorded in the horizontal Y direction were significantly higher on the motor bogie than on the trailer bogie, both at the lower and upper damper mountings. A similar trend was observed in the vertical Z direction, where the accelerations measured at the upper mounting of the motor bogie exceeded those recorded on the trailer bogie, with percentage differences at the lower mounting reaching over 205% and 333%, respectively. These results indicate substantially higher dynamic loads acting on the components of the motor bogie. The findings also suggest that integrating adaptive damping systems with real-time monitoring algorithms can further improve operational reliability and extend the useful life of components. A key contribution of this work is the identification and quantification of significantly different dynamic loading patterns in motor and trailer bogies, creating a basis for the optimization of damper characteristics according to bogie type and operating conditions.