Skip to Content
Applied SciencesApplied Sciences
  • Article
  • Open Access

12 May 2025

19 Pages

Influences of Temperature Variations Around Subway Ventilations on Fractures of Continuous Welded Rail Fractures

,
,
and
1
Department of Construction Engineering, Dongyang University, No. 145 Dongyangdae-ro, Punggi-eup, Yeongju-si 36040, Republic of Korea
2
Seoul Metro, 1233, Yangjae-daero, Songpa-gu, Seoul 05540, Republic of Korea
3
Department of Architectural Engineering, Gachon University, Seongnam-si 13120, Republic of Korea
*
Author to whom correspondence should be addressed.
This article belongs to the Special Issue Rail Transport Aerodynamics

Abstract

This study examines factors affecting the thermal expansion behavior of continuous welded rails (CWRs) in urban rail systems and investigates conditions that lead to rail weld fractures. Parameters affecting CWR fractures near ventilation shafts in urban rail systems are identified through field investigations and machine learning analysis. Further, a computational fluid dynamics analysis is employed to evaluate the range of temperature variation around tunnel ventilation shafts that affects the CWR fractures. Load conditions, including temperature changes, were analyzed using a validated numerical model to determine the axial stress in the CWR, which resulted in a 23% reduction in the axial stress in the weld joint. The results confirm that increased localized temperature fluctuations around tunnel ventilation shafts lead to a higher frequency of CWR fractures.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.