Skip to Content
You are currently on the new version of our website. Access the old version .
Applied SciencesApplied Sciences
  • Article
  • Open Access

29 October 2022

12 Pages

Recycling Waste Paver Blocks in the Manufacture of New Concrete Paver Blocks and Building Bricks

and
1
Faculty of Civil Engineering, Wrocław University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland
2
School of Industrial Design & Architectural Engineering, Korea University of Technology & Education, 1600 Chungjeol-ro, Byeongcheon-myeon, Dongnam-gu, Cheonan 31253, Chungnam, Korea
*
Author to whom correspondence should be addressed.

Abstract

This study investigates the feasibility of recycling various waste paving blocks as raw materials for concrete. The recycling rate of waste blocks in Korea remains around 11%. Therefore, three types of waste paving blocks, i.e., recycled clay-, granite-, and concrete block, were used as partial replacements for sand in a concrete mixture at 10%, 20%, and 30% replacement ratios. According to the Korean standards for concrete pavers and building bricks, compressive strength, flexural strength, and water absorption tests were conducted. In addition, UPV and unit weight tests were performed. The results showed that the performance of concrete mixtures decreased with the increasing replacement ratio of waste clay and concrete, while the addition of waste granite improved the properties of the mixtures. All the prepared concrete mixtures met the requirements specified in the standards, demonstrating that concrete incorporating waste blocks can be used as paving blocks and building bricks under limited conditions.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.